hi, i have got a
SUN F15K DOMAIN TAKING HARDWARE CONFIGURATION DUMP. DUMP FILE: -D/VA message
i wnat to logon as sms-svc on to the controller to check what's happening
can you please guide me how do i login as sms-svc on the controller and check
thank you (1 Reply)
Dear Gurus
I am running AIX with several users that are using the system, i would like to monitor the commands that are run by these users. Is there a log system that records the commands that are executed by the users???
Any kind of help will be appreciated.
Regards
Masquerder (6 Replies)
http://i44.tinypic.com/2cmq7vn.jpg
Please help me on this issue i'm using solaris on vmware x86 even i runed fsck on root disk like 'fsck -Y /dev/rdsk/c0d0s0 ' but again after reboot it is going to maintanance mode reply soon (6 Replies)
I am working on a SUN T2000 machine with Solaris 10 running on it. When I checked the system this morning, I found it to be turned off. The lastreboot command showed that the system had been shut down the previous night.
I want to find out how the system was shut down. I have run hardware health... (2 Replies)
Hello Friends,
I need to change network filesystem status as online but it always seems in maintenance mode, I appreciate your any suggestion to change its state as online.
shell>svcadm enable svc:/system/filesystem/local
shell>svcs -l svc:/system/filesystem/local
fmri ... (4 Replies)
After a memory upgrade all network interfaces are misconfigued. How do i resolve this issue. Below are some out puts.thanks.
ifconfig: plumb: SIOCLIFADDIF: eg000g0:2: no such interface
# ifconfig eg1000g0:2 plumb
ifconfig: plumb: SIOCLIFADDIF: eg1000g0:2: no such interface
# ifconfig... (2 Replies)
This isn't a RedHat specific question. The software in question might be used for any Linux distribution. Would it be advisable or inadvisable for my application, to be downloaded by many people I don't know, to write to the following logs in /var/log?
maillog or mail.log
messages
secure
... (10 Replies)
It is crazy when you just entered a command example sudo or su or even ps. It will flood your /var/log/messages. Please see duplicate entries except for the pid. At 1 specific time.
Thanks
$ cat b
Jan 13 17:09:05 SERVER1 bash: user1 as root:
Jan 13 17:09:05 SERVER1 bash: user1 as root:
Jan... (3 Replies)
Discussion started by: invinzin21
3 Replies
LEARN ABOUT LINUX
if_mpadm
if_mpadm(1M) System Administration Commands if_mpadm(1M)NAME
if_mpadm - change operational status of interfaces within a multipathing group
SYNOPSIS
/usr/sbin/if_mpadm -d interface_name
/usr/sbin/if_mpadm -r interface_name
DESCRIPTION
Use the if_mpadm utility to change the operational status of interfaces that are part of an IP multipathing group. If the interface is
operational, you can use if_mpadm -d to detach or off-line the interface. If the interface is off-lined, use if_mpadm -r to revert it to
its original state.
When a network interface is off-lined, all network access fails over to a different interface in the IP multipathing group. Any addresses
that do not failover are brought down. Network access includes unicast, broadcast, and multicast for IPv4 and unicast and multicast for
IPv6. Addresses marked with IFF_NOFAILOVER do not failover. They are marked down. After an interface is off-lined, the system will not use
the interface for any outbound or inbound traffic, and the interface can be safely removed from the system without any loss of network
access.
The if_mpadm utility can be applied only to interfaces that are part of an IP multipathing group.
OPTIONS
The if_mpadm utility supports the following options:
-d interface_name Detach or off-line the interface specified by interface_name.
-r interface_name Reattach or undo the previous detach or off-line operation on the interface specified by interface_name. Unless
the -d option was used to detach or off-line the interface, this option will fail.
EXAMPLES
Example 1: Detaching an Interface
Use the following command to off-line or detach the interface. All network access will failover from hme0 to other interfaces in the same
IP multipathing group. If no other interfaces are in the same group, the operation will fail.
example% if_mpadm -d hme0
Example 2: Reattaching an Off-line Interface
Use the following command to undo the previous operation. Network access will failback to hme0.
example% if_mpdadm -r hme0
ATTRIBUTES
See attributes(5) for descriptions of the following attributes:
+-----------------------------+-----------------------------+
| ATTRIBUTE TYPE | ATTRIBUTE VALUE |
+-----------------------------+-----------------------------+
|Availability |SUNWcsu |
+-----------------------------+-----------------------------+
|Interface Stability |Unstable |
+-----------------------------+-----------------------------+
SEE ALSO ifconfig(1M), in.mpathd(1M), attributes(5)DIAGNOSTICS
off-line failed as there is no other functional interface available in the multipathing group for failing over the network access.
This message means that other interfaces in the group are failed over already or the multipathing configuration was not suitable for com-
pleting a failover.
off-line cannot be undone because multipathing configuration is not consistent across all the interfaces in the group.
This message means that some interfaces in the IP multipathing group are not configured consistently with other interfaces in the group,
for example, one of the interfaces in the group does not have an IFF_NOFAILOVER address.
SunOS 5.10 3 Sep 2002 if_mpadm(1M)