The Stream Information inside "VTS_01 - Stream Information.txt" are: ---------- Post updated at 11:15 AM ---------- Previous update was at 11:13 AM ----------
Quote:
Originally Posted by zaxxon
There is tons of tools on the net for such stuff, at least for windows. I doubt this belongs to the shell scripting area at all - moving thread.
Hello zaxxon,
I've tried avidemux, but is not working for me. May be you or somebidy else that have done this before could help me. Maybe how to using menconder script in linux.
Hello there!
Slightly off topic maybe, but maybe someone can help us. For a videoshow which will be called reality 6.1 we need a video file from a unix kernel that is compiling. Does anyone know how to capture this, or does anyone have such a vid?
cheers,
iuno
(www.iuno.nl) (2 Replies)
I need to output a summary of a video as an animated gif. Ideally, I would have 8 equally-spaced frames from the video, and play them back one at a time, each for 0.25 seconds. So I'd have a 2 second animated gif.
This is what I have so far:
#!/bin/bash
mplayer "$@" -vo... (0 Replies)
Hello,
I need software to convert multimedia files.
What is the good software?
I was looking for it on the web, but I did not find any special.
Thanks... (1 Reply)
found a few ffmpeg posts and after a few unsuccessful attempts, I have found a solution :)
to encode an avi to to an nokia e71 recognized mp4 format:
ffmpeg -y -i inputFILE.avi -acodec aac -ab 72k -s 320x176 -aspect 16:9 -vcodec h264 -b 300k -qcomp 0.6 -qmin 16 -qmax 51 -qdiff 4 -flags +loop... (2 Replies)
I need some recommendations on programs to fix broken avi index. Please tell me what your experiences have been with the program. Which programs work and which ones don't work. (1 Reply)
Is there a way to burn avi to cd with k3b? When I tried the disc became unusable. I tried to open the disc on 2 different computers with no luck. (0 Replies)
Raspberry Pi B 2014-01-07 Raspbian fully up to date.
Installed and configured motion for surveillance.
It works just fine and creates .avi files and .jpeg.
Installed Mplayer trying to run it from desktop was
not successful. I did try to do a command line by
executing sudo mplayer... (6 Replies)
Discussion started by: oldcity
6 Replies
LEARN ABOUT DEBIAN
sg_sync
SG_SYNC(8) SG3_UTILS SG_SYNC(8)NAME
sg_sync - send the scsi command synchronize cache
SYNOPSIS
sg_sync [--count=COUNT] [--group=GROUP] [--help] [--immed] [--lba=LBA] [--sync-nv] [--verbose] [--version] DEVICE
DESCRIPTION
Send SYNCHRONIZE CACHE (10) command to DEVICE. This command is defined for SCSI block devices (see SBC-2). If successful this command makes
sure that any blocks whose latest versions are held in (volatile) cache are written to (also termed as "synchronized with") the medium. If
the --sync-nv option is given and the device has a non-volatile cache then any blocks whose latest versions are held in volatile cache are
written to non-volatile cache.
If the LBA and COUNT arguments are both zero (their defaults) then all blocks in the cache are synchronized. If LBA is greater than zero
while COUNT is zero then blocks in the cache whose addresses are from and including LBA to the highest lba on the device are synchronized.
If both LBA and COUNT are non zero then blocks in the cache whose addresses lie in the range LBA to LBA+COUNT-1 inclusive are synchronized
with the medium.
OPTIONS
Arguments to long options are mandatory for short options as well.
-c, --count=COUNT
where COUNT is the number of blocks to synchronize from and including LBA. Default value is 0. When 0 then all blocks in the
(volatile) cache from and including LBA argument to the highest block address are synchronized.
-g, --group=GROUP
where GROUP is the group number which can be between 0 and 31 inclusive. The default value is 0 . Group numbers are used to segre-
gate data collected within the device. This is a new feature in SBC-2 and can probably be ignored for the time being.
-h, --help
output the usage message then exit.
-i, --immed
sets the IMMED bit in the SYNCHRONIZE CACHE command. This instructs the device, if the format of the command is acceptable, to
return a GOOD status immediately rather than wait for the blocks in the (volatile) cache to be synchronized with (i.e. written to)
the medium (or the non-volatile cache).
-l, --lba=LBA
where LBA is the lowest logical block address in the (volatile) cache to synchronize to the medium (or the non-volatile cache).
Default value is 0 .
-s, --sync-nv
synchronize the (volatile) cache with the non-volatile cache. Without this option (or if there is no non-volatile cache in the
device) the synchronization is with the medium.
-v, --verbose
increase the level of verbosity, (i.e. debug output).
-V, --version
print the version string and then exit.
NOTES
Various numeric arguments (e.g. LBA) may include multiplicative suffixes or be given in hexadecimal. See the "NUMERIC ARGUMENTS" section in
the sg3_utils(8) man page.
EXIT STATUS
The exit status of sg_sync is 0 when it is successful. Otherwise see the sg3_utils(8) man page.
AUTHORS
Written by Douglas Gilbert.
REPORTING BUGS
Report bugs to <dgilbert at interlog dot com>.
COPYRIGHT
Copyright (C) 2004-2009 Douglas Gilbert
This software is distributed under a FreeBSD license. There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PUR-
POSE.
SEE ALSO
sg_start(sg3_utils)
sg3_utils-1.27 March 2009 SG_SYNC(8)