Wrong data with Read from a serial port. Post: 302732635

9 More Discussions You Might Find Interesting

1. Linux

Urgent - serial port

Hi All, I am a begineer in Linux, I have 4 ports and 3 are operational port 1,port 2 and port 4 (when I plug in serial device I can see it working) but port 3 seems it is not working. I am sure the hardware is fine. when I give command dmesg | grep tty I get, serial 8250:ttyS0 at...

2. SCO

data transfer from serial port

dear sir, pls. can you help me ? , my os is unix sco 5.0.4 and ,server dat derive (1,4gb) not working, now i want to transfer my server data in other machine (unix/other possible) by serial port/other port comminication. thanks pankaj raval

3. Programming

Problem with read data from serial device

I have problem with C programming. I want to send & receive data through serial communication. I send data(command) to device to get data from device but when receive data, it can't get altogether of data. It get only some data. What should I do to get altogether of data? If all of...

4. Shell Programming and Scripting

Need help with serial port

Hi, I have a external board connected to my serial port. I need to execute "shutdown -r now" command when system boot up. When system boots up it requires a username ans password. Then I need to run my command. I can use rc script but that is rebooting system before it asks for username and...

5. Solaris

How to enable Serial port on ILOM, when Network Port is enabled in parallel

Hi Everyone, In my environment, I have few T5220. On the iLOM Management Card, I have both Network and Serial port are cabled, I don't have any issues while I try to connect using Network Management port, but when I try to connect the serial port for the same server which is actually connected...

6. Programming

unable to send read and write serial port

hey frns pls help me out !! i hav a code of c that i have to include in my project. i am using a device (geomeda) that has unix based OS. it also support SIM card for connecting to server . I need to send SMS to user from this device.. below code is not working .. i am unable to send sms and the...

7. Programming

Read from serial port

Hi I try to communicate with a GSM modem, from C, for sending SMS. I use standart AT-commands. Working well with terminal. There is no problem writing ti the port. But when I try to read I only get a echo, I write "ATI" and get "ATI" back, I should get somthing like "SIEMENS 35...

8. Debian

Reading data from a serial port

Dear List - I am trying to capture data from a serial port and write it to a file. /var/www$ cat /dev/ttyS0 > scale_value.html cat: /dev/ttyS0: Device or resource busy /var/www# cat /proc/tty/driver/serial serinfo:1.0 driver revision: 0: uart:16550A port:000003F8 irq:4 tx:90...

9. Solaris

Cabling and adapters to communicate to service processor serial port from Windows PC with USB port.

Hello, I have an unloaded T5140 machine and want to access the ILOM for the first time and subsequently the network port after that., and then load Solaris 10 the final January 2011 build. The first part is what confuses me -the cabling. I am coming from a Windows machine (w/appropriate...

LEARN ABOUT OSF1

iso-2022

iso2022(5)							File Formats Manual							iso2022(5)

NAME

       iso2022, iso-2022, ISO-2022 - A character encoding mechanism standardized by the International Standards Organization (ISO)

DESCRIPTION

       The ISO-2022 standard defines a mechanism for handling single-byte and multibyte characters. The standard specifies four classes of charac-
       ter sets: The 94-charset class, which contains character sets with 94 positions (single-byte characters).  Examples are the ASCII  and  JIS
       X0201 character sets.  The 96-charset class, which contains character sets with 96 positions (single-byte characters). Examples are the ISO
       Latin series of character sets.	The 94x94-charset class, which contains character sets with 94x94 positions (2-byte characters).  Examples
       are  the  GB  2312  and the CNS 11643 character sets.  The 96x96-charset class,	which contains character sets with 96x96 positions (2-byte
       characters).

       In the ISO-2022 standard, four registers, called G0, G1, G2 and G3, are used to reference a character set. Before a character  set  can	be
       used, the character set must be assigned, or designated, to one of these registers.  The designation of a character set is done by using an
       escape sequence in the following format:

       ESC [I] F

       In this format: Is an intermediate character that is used to designate a character set to one of the registers (G0, G1, G2, oR G3).   Is  a
       unique final character of a particular character set.

       The  designation of a character set, whose final character is F, to different registers is as follows: Designates a multibyte character set
       (94x94 or 96x96) to G0.	Designates a character set in the 94-charset class to G0.  Designates a character set in the 94-charset  class	to
       G1.   Designates  a  character  set in the 94-charset class to G2.  Designates a character set in the 94-charset class to G3.  Designates a
       character set in the 96-charset class to G1.  Designates a character set in the 96-charset class to G2.	Designates a character set in  the
       96-charset class to G3.

SEE ALSO

       Commands: locale(1)

       Others: ascii(5), i18n_intro(5), iso2022jp(5), l10n_intro(5)

																	iso2022(5)