Sponsored Content
Full Discussion: HTFS Filesystem
Operating Systems SCO HTFS Filesystem Post 302731979 by jgt on Friday 16th of November 2012 09:05:28 AM
Old 11-16-2012
Quote:
and section 9.12 on this link:
"crosstor.com" is a dead end.

Quote:
I obviously can't boot the drive from a different computer.
Yes you can.
1. If the drive is SCSI, you need a similar or the original hba.
2. If IDE, you need to make sure that the CMOS sees the drive with the same geometry. If not, add the "biosgeom" boot string at the boot prompt. If you have it wrong, the computer will boot and show about half the hardware list page, and stop at the mounting /dev/hd0 line.
3. The X Windows may not work, but hardly anybody uses it.
4. The nic driver may be different, re-install it. Also even if it is the same nic, it may have different PCI slot characteristics and need to be re-installed.
5. Use an older single core P4 machine, you will not run into the problems of not having a PS2 keyboard.

Last edited by jgt; 11-16-2012 at 10:25 AM..
 

10 More Discussions You Might Find Interesting

1. UNIX for Dummies Questions & Answers

/dev/hd* ?? & HTFS .... What is this stuff?

# grep "Jul 3" syslog.messages | more Jul 3 00:16:03 www3 CPU3: NOTICE: HTFS: No space on dev hd (1/42) Jul 3 00:16:08 www3 CPU3: NOTICE: HTFS: No space on dev hd (1/42) Jul 3 00:17:01 www3 CPU2: NOTICE: HTFS: No space on dev hd (1/42) Jul 3 00:17:06 www3 syslogd: /usr/adm/debug: No space... (1 Reply)
Discussion started by: Cameron
1 Replies

2. UNIX for Dummies Questions & Answers

Warning: HTFS: bad dir inode 62730 on HTFS dev hd (1/42)

Hello all. I am receiving this message on the console of a SCO Openserver 5.0.7 server. The hardware is IBM, running mirrored SCSI drives with a hot-swap spare off of an IBM Serveraid controller. I suspect that some permutation of fsck can help me resolve whatever is causing the error, but I am... (0 Replies)
Discussion started by: DoublePanic
0 Replies

3. UNIX for Advanced & Expert Users

NOTICE: HTFS: No space on dev hd (1/42)

If somebody solve this error please help me! Thanks in advance! :confused: (7 Replies)
Discussion started by: FCollet
7 Replies

4. SCO

SCO 5.0.6 how to partition resize in HTFS?

I have a 17GB SCSI disk in an SCO 5.0.6 server and it's running out of space because of a growing database on the disk. Consequently I would like to upgrade the 17GB to a 74GB disk and extend the partition. First off, is partition extension available under HTFS - I know this is an old... (1 Reply)
Discussion started by: carribey
1 Replies

5. UNIX for Dummies Questions & Answers

filesystem

i am about to install oracle on my solaris x86-64 This installation require 4Gb space and i qish to do this installation on the directory /u01/app/oracle The following was my approch mkdir -p /u01/app/oracle i then use the command below to see if there is enough space # df -h... (6 Replies)
Discussion started by: seyiisq
6 Replies

6. Solaris

Filesystem - error when extend the filesystem

Hi all, currently , my root filesystem already reach 90 ++% I already add more cylinder in the root partition as below Part Tag Flag Cylinders Size Blocks 0 root wm 67 - 5086 38.46GB (5020/0/0) 80646300 1 swap wu 1 - ... (11 Replies)
Discussion started by: SmartAntz
11 Replies

7. UNIX for Dummies Questions & Answers

htfs file system !

Hi, How to mount HTFS FS (from SCO UNIX) under linux? Best regards. where is link: htfs_fs-0.01alpha.tar.bz2 (2 Replies)
Discussion started by: EMREZ
2 Replies

8. UNIX for Dummies Questions & Answers

hwo to find shared filesystem and local filesystem in AIX

Hi, I wanted to find out that in my database server which filesystems are shared storage and which filesystems are local. Like when I use df -k, it shows "filesystem" and "mounted on" but I want to know which one is shared and which one is local. Please tell me the commands which I can run... (2 Replies)
Discussion started by: kamranjalal
2 Replies

9. Solaris

Solaris Filesystem vs. Windows FileSystem

Hi guys! Could you tell me what's the difference of filesystem of Solaris to filesystem of Windows? I need to compare both. I have read some over the net but it's so much technical. Could you explain it in a more simpler term? I am new to Solaris. Hope you help me guys. Thanks! (4 Replies)
Discussion started by: arah
4 Replies

10. AIX

Mount Filesystem in AIX Unable to read /etc/filesystem

Dear all, We are facing prolem when we are going to mount AIX filesystem, the system returned the following error 0506-307The AFopen call failed : A file or directory in the path name does not exist. But when we ls filesystems in the /etc/ directory it show -rw-r--r-- 0 root ... (2 Replies)
Discussion started by: m_raheelahmed
2 Replies
installboot(1M) 														   installboot(1M)

NAME
installboot - install bootblocks in a disk partition SYNOPSIS
installboot bootblk raw-disk-device The boot(1M) program, ufsboot, is loaded from disk by the bootblock program which resides in the boot area of a disk partition. The ufs boot objects are platform-dependent, and reside in the /usr/platform/platform-name/lib/fs/ufs directory. The platform name can be found using the -i option of uname(1). The installboot utility is a SPARC only program. It is not supported on the architecture. users should use installgrub(1M) instead. bootblk The name of the bootblock code. raw-disk-device The name of the disk device onto which the bootblock code is to be installed; it must be a character device which is read- able and writable. Naming conventions for a SCSI or IPI drive are c?t?d?s? and c?d?s? for an IDE drive. Example 1: Installing UFS Boot Block To install a ufs boot block on slice 0 of target 0 on controller 1 of the platform where the command is being run, use: example# installboot /usr/platform/`uname -i`/lib/fs/ufs/bootblk /dev/rdsk/c1t0d0s0 /usr/platform/platform-name/lib/fs/ufs directory where ufs boot objects reside. /platform/platform-name/ufsboot second level program to boot from a disk or CD See attributes(5) for descriptions of the following attributes: +-----------------------------+-----------------------------+ | ATTRIBUTE TYPE | ATTRIBUTE VALUE | +-----------------------------+-----------------------------+ |Availability |SUNWcsu | +-----------------------------+-----------------------------+ od(1), uname(1), boot(1M), init(1M), kadb(1M), kernel(1M), monitor(1M), reboot(1M), rpc.bootparamd(1M), init.d(4), attributes(5) WARNINGS
The installboot utility fails if the bootblk or openfirmware files do not exist or if the raw disk device is not a character device. 11 Apr 2005 installboot(1M)
All times are GMT -4. The time now is 02:04 AM.
Unix & Linux Forums Content Copyright 1993-2022. All Rights Reserved.
Privacy Policy