Wrong data with Read from a serial port. Post: 302731747

9 More Discussions You Might Find Interesting

1. Linux

Urgent - serial port

Hi All, I am a begineer in Linux, I have 4 ports and 3 are operational port 1,port 2 and port 4 (when I plug in serial device I can see it working) but port 3 seems it is not working. I am sure the hardware is fine. when I give command dmesg | grep tty I get, serial 8250:ttyS0 at...

2. SCO

data transfer from serial port

dear sir, pls. can you help me ? , my os is unix sco 5.0.4 and ,server dat derive (1,4gb) not working, now i want to transfer my server data in other machine (unix/other possible) by serial port/other port comminication. thanks pankaj raval

3. Programming

Problem with read data from serial device

I have problem with C programming. I want to send & receive data through serial communication. I send data(command) to device to get data from device but when receive data, it can't get altogether of data. It get only some data. What should I do to get altogether of data? If all of...

4. Shell Programming and Scripting

Need help with serial port

Hi, I have a external board connected to my serial port. I need to execute "shutdown -r now" command when system boot up. When system boots up it requires a username ans password. Then I need to run my command. I can use rc script but that is rebooting system before it asks for username and...

5. Solaris

How to enable Serial port on ILOM, when Network Port is enabled in parallel

Hi Everyone, In my environment, I have few T5220. On the iLOM Management Card, I have both Network and Serial port are cabled, I don't have any issues while I try to connect using Network Management port, but when I try to connect the serial port for the same server which is actually connected...

6. Programming

unable to send read and write serial port

hey frns pls help me out !! i hav a code of c that i have to include in my project. i am using a device (geomeda) that has unix based OS. it also support SIM card for connecting to server . I need to send SMS to user from this device.. below code is not working .. i am unable to send sms and the...

7. Programming

Read from serial port

Hi I try to communicate with a GSM modem, from C, for sending SMS. I use standart AT-commands. Working well with terminal. There is no problem writing ti the port. But when I try to read I only get a echo, I write "ATI" and get "ATI" back, I should get somthing like "SIEMENS 35...

8. Debian

Reading data from a serial port

Dear List - I am trying to capture data from a serial port and write it to a file. /var/www$ cat /dev/ttyS0 > scale_value.html cat: /dev/ttyS0: Device or resource busy /var/www# cat /proc/tty/driver/serial serinfo:1.0 driver revision: 0: uart:16550A port:000003F8 irq:4 tx:90...

9. Solaris

Cabling and adapters to communicate to service processor serial port from Windows PC with USB port.

Hello, I have an unloaded T5140 machine and want to access the ILOM for the first time and subsequently the network port after that., and then load Solaris 10 the final January 2011 build. The first part is what confuses me -the cabling. I am coming from a Windows machine (w/appropriate...

LEARN ABOUT OSF1

iscc

iscc(7) 						 Miscellaneous Information Manual						   iscc(7)

NAME

       iscc - serial communications interface

SYNOPSIS

       controller  iscc0  at  isa0

DESCRIPTION

       An  onboard  Zilog  8530  DUART	provides  AXPvme-based Single Board Computers with console (CON) and auxiliary (AUX) serial communications
       ports.  Both serial communications ports can operate at baud rates from B50 to B38400,  excluding B134 (see tty(7)).

       On AXPvme Single Board Computers configured with a graphics head as the system console, the CON serial communications port (/dev/tty01)	is
       available for use by application programs as an additional communications port.

       In  the	absence  of a graphics head, the CON serial communications port (/dev/console) becomes the system console. When used as the serial
       system console, the CON serial communications port always operates at 9600 BPS, 8-bits, and no parity.

       Regardless of system console, the AUX serial communications port (/dev/tty00) is always available for use by application programs.

RESTRICTIONS

       Data communications equipment attached to the CON serial communications port must be set to 9600 BPS, 8-bits, no parity when configured	as
       the serial system console. The iscc terminal driver enforces this restriction.

       No modem control is supported for either the CON or AUX serial communications ports.

FILES

       console terminal local terminal local terminal

RELATED INFORMATION

       console(7), devio(7), tty(7), MAKEDEV(8) delim off

																	   iscc(7)