Yes, I ran the ogl_install_check from a terminal in CDE.
I think my $DISPLAY is correctly exported as the "env" command gives me this output
Code:
DISPLAY=:0.0
Also, I ran truss ogl_install_check on both systems, but the output were so huge, that I decided to don't put it here.
BTW, I looked at these outputs, and couldn't find something wrong. Let me know if you want me to put these outputs in this thread.
Also, I've just reinstalled the whole system with Cadds. The computer is now clean. (it's a CD set that has Solaris 8 & Cadds provided)
BTW, let me know if you need more details about my configuration.
Thanks a lot in advance,
Regards,
---------- Post updated at 09:01 AM ---------- Previous update was at 04:10 AM ----------
Hi there, me again .
So, I've tried many things. First, you'll see below packages I have for OpenGL and my XVR-1200 graphic card.
Code:
pkginfo | egrep -i "XVR-1200"
application SUNWjfbcf Sun XVR-1200 and XVR-600 Graphics Configuration Software (64-bit)
system SUNWjfbmn Sun XVR-1200 and XVR-600 Graphics On-line Manual Pages
system SUNWjfbr Sun XVR-1200 and XVR-600 Graphics System Software (Root) (64-bit)
application SUNWjfbw Sun XVR-1200 and XVR-600 Graphics Window System Support (64-bit)
system SUNWjfbx Sun XVR-1200 and XVR-600 Graphics System Software/Device Driver (64-bit)
Code:
pkginfo | egrep -i "OpenGL"
application SUNWafbgl Sun OpenGL for Solaris Elite3D Support
application SUNWafbgx Sun OpenGL for Solaris 64-bit Elite3D Support
application SUNWffbgl Sun OpenGL for Solaris Creator Graphics (FFB) Support
application SUNWffbgx Sun OpenGL for Solaris 64-bit Creator Graphics (FFB) Support
application SUNWgfbgl Sun OpenGL for Solaris Gfb Support
application SUNWgfbgx Sun OpenGL for Solaris 64-bit Gfb Support
application SUNWglh Sun OpenGL for Solaris Header Files
application SUNWglrt Sun OpenGL for Solaris Runtime Libraries
application SUNWglrtu Sun OpenGL for Solaris Platform Specific Runtime Libs
application SUNWglrtx Sun OpenGL for Solaris 64-bit Runtime Libraries
application SUNWglsr Sun OpenGL for Solaris Runtime Generic Software
application SUNWglsrx Sun OpenGL for Solaris 64-bit Optimized SW Rasterizer
application SUNWglsrz Sun OpenGL for Solaris Optimized SW Rasterizer
application SUNWifbgl Sun OpenGL for Solaris Expert3D/Expert3D-Lite/XVR-500 Graphics Support
application SUNWifbgx Sun OpenGL for Solaris 64-bit Expert3D/Expert3D-Lite/XVR-500 Graphics Support
So, according to packages that are installed, it seems everything is OK and should work (IMHO).
To be honest, I don't know what is wrong with this configuration, and unfortunately, looking for "glXMakeCurrent Error: Can't make context current" in Google didn't helped a lot.
Also, while DGPickett was talking about DISPLAY export, I have tried to use x forwarding through another computer (Windows, using Putty and Xming).
And, the output, when I try to run a graphical application is:
Code:
Cannot open connection to window server: localhost:10.0 (Server package)
And nothing appears.
But, when I do it on another computer (still from Windows using Putty & Xming), it works perfectly.
Also, just noticed that I have this in my ~/.dt/errorlog file
Code:
Workspace Manager: I/O error on display:: :0.0
So, I think DGPickett may have spotted a problem on my configuration related to DISPLAY export.
But, now the question is : How to fix it?
Any suggestion is welcome, and as usual, if you need more details about some configuration files, just ask, I'll be please to give you more details.
Thanks again a lot in advance
---------- Post updated 11-15-12 at 03:34 AM ---------- Previous update was 11-14-12 at 09:01 AM ----------
Hi again guys . Sorry to give you details post by post, day after day, but as Solaris 8 is new to me, it takes me longer to accumulate informations.
So, first, you'll see below what graphic card is installed in my SunBlade 1500-red
Also, I have the Cadds documentation (available here if you want) which helps to set up Solaris for a good use of Cadds.
Here are few things
- First, they talk about XVR-1200. That means, it should be compatible.
- Page 3-33, they talk on how to set up the XVR-xxxx adaptors.
Quote:
If you have a Creator3D or an XVR accelerator board, run the following
commands:
fbconfig -defaults -defoverlay true
This is exactly what I've done (enabled -defoverlay), but the problem persists.
You'll see below my full graphic configuration
Code:
fbconfig -prconf
--- Hardware Configuration for /dev/fb ---
Type: XVR-1200
Sun Serial Number: 3753101006482
Hardware Revision: -04 rev50
Manufacture Date: Fri Apr 9 10:47:25 2004
PROM Information: @(#)jfb.fth 1.10 03/04/03 SMI
Monitor/Resolution Information:
EDID Data: Available - EDID version 1 revision 3
Monitor type: INM product code 22037 S/N 257 DOM 18W/2010
Current resolution setting: 1280x1024x75
Monitor possible resolutions: 1024x768x60, 1024x768x70, 1024x768x75,
1280x1024x60, 1280x1024x75, 640x480x60, 1920x1200x60_240T,
1600x1200x60, 800x600x75, 1920x1080x60, 1600x1200x60rb
Framelock Configuration:
Slave Mode: Disabled
Memory Information:
Total Video Memory: 134217728
Video Memory Used: 134217728
Total Texture Memory: 268435456
Texture Memory Used: 0
Total Display List Memory: 33554432
Code:
fbconfig -propt
--- OpenWindows Configuration for /dev/fb ---
OWconfig: machine
Video Mode: 1280x1024x75
Accum: Enabled (allocate an accumulation buffer if possible)
Multisample Information:
Multisample Mode: Available (multisample visuals will be available)
Samples Per Pixel: Adaptive (variable num. of samples per pixel, min. is 2)
Screen Information:
DoubleWide: Disabled
DoubleHigh: Disabled
Output Configuration: Direct
Offset/Overlap: [0, 0]
Visual Information:
Default Visual: Non-Linear Overlay Visual
Visual Ordering: Linear Visuals are last
Overlay Visuals are last
Gamma Correction Value: 2.22
Gamma Correction Table: Available
Fake8 rendering: disabled
Default Visual Depth (defdepth): 8
Still can't see anything wrong.
Also, I finally manage to launch Cadds from terminal, and here is where I have an issue.
Code:
CADDS 5i Release 12.0
Copyright 2001 blablabla
Cannot associate OpenGL context with window
Double Buffering No Supported
Cannot associate OpenGL context with window
Double Buffering No Supported
Cannot associate OpenGL context with window
Double Buffering No Supported
... and then it launches correctly, but without 3D acceleration, based on X11 output where it should use OpenGL
Is it possible that the graphic card is faulty?
Any suggestion on what I should try/test.
Please, let me know if you need more details.
Thanks a lot in advance
Last edited by firstpost; 11-15-2012 at 03:26 AM..
I'm pretty much new to this Linux stuff, I installed FC4 the other night to try it out.
I'm having a slight problem when launching Quake 3, it's giving me the error GLimp_Init() - could not load OpenGL subsystem
I've updated my video drivers to the latest version and went through fglrxconfig,... (3 Replies)
Hi,
I try to install opengl bat it give a error that i need the opengl base level fileset 5.3.0.0
I use AIX 5.3 and my oslevel is now 5300-03.
Where can i find the opengl files i need (5.3.0.0)?
Thanks Peter. (1 Reply)
Hi,
i am new to opengl, how to work openGL in ubuntu ,,
i am not getting which packages as to be install and how to install those packages.
and how to work with small programs..
Please guide me ,,, it will appriceated ... (7 Replies)
Hi,
I want to know how to write text in window and that is to be rotated in 3D using openGL in C language...
any answer will have value .... (0 Replies)
Hi Sir,
i am new to openGL, i want to know how to draw cylinder using openGL code in C or C++..
And i have to insert bitmap images on cylinder..
How to do this .. please guide me ...
Thanking You in advance .. (0 Replies)
Hi,
How to decode an image using openGL library libjpeg ..
which are the steps needed to do this using C language..
actually my work is to decode the image, store it on the buffer,
and place it on cube surface..
please guide me,,any answer will appreciated .. (8 Replies)
Hi,
Any one help me regarding how to install openGL packages to work in linux.
And i installed some of the packages(gl,glu), but i don't know whether they are installed are not .. Which command is should use to check whether openGL is installed are not ..
I am Thankful for any kind of... (3 Replies)
i dont know in which forum to ask this question ..... :( . pardon me if it is not this forum
i wanted to know difference between openGL ES and directfb
as far i know directfb is alternative to x11 in linux for embedded devices. something like ...
application
|
... (1 Reply)