It's giving you the reason for not mounting in the output of your mount command:
So it's not able to find a filesystem with a label of "INSTALL" we need to figure out what the proper label for the filesystem is, which you can usually do with the blkid command's output. That will give you high level filesystem information (including filesystem label). If it's in the output but there's no label is assigned to it, you can either change /etc/fstab to mount the block device directly or use e2label on the block device (your use of e2label didn't work because you're using it on the directory you're mounting the filesystem on rather than the block device that the filesystem is on).
If you give us the output of blkid we can bring you through this step-by-step.
how can i mount windows file system into solaris using vfstab or mount command. also please tell me how to display the partition information. (1 Reply)
Hi,
I've got a recent problem with 2 file systems on an AIX 5.3 server. The fs's are marked to auto mount at startup and do show as being mounted after a a restart however if you cd to the mount point and 'df -g .' it shows the fs hasn't actually mounted.
$ mount |grep SQLT0001.0
... (2 Replies)
Hello.
When I use format command - It shows:
/dev/dsk/c0d0s4 is normally mounted on /u02 according to /etc/vfstab. Please remove this entry to use this device.
What does it mean? (4 Replies)
Hi all,
Kind of an emergency situation, I have to NFS mount an AIX filesystem on to a Sun Solaris OS (5.10).
Typically from Sun to Sun is:
mount -F nfs <remote file system>/dir <mount point>
Which of course doesn't work if the remote file system is another OS (like AIX).
Is there... (1 Reply)
Say, we are going to mount a remote file system on our server. I am not too sure about how will data be transferred back to original host when it is written to the mounted FS. Could you please share an article or your knowledge on this?
Thanks in advance;
Stephen W. (2 Replies)
Hi All,
I am working with the Solaris 9.
In df -h command / file system size is 9.6 GB , used 7.5 GB and avialble space is 2.1. OK
But in du -hd command it is showing some 4.1 GB only.
How to find out that remaining 3.4GB.
Can you please help me ...
Thanks and Regards, (1 Reply)
When I am trying to mount my windows partitions in REDHAT Enterprise Linux 5 using these command
mount -t ntfs-3g /dev/sda1 /mnt/ntfs
I have encountered with the problem mentioned below
FATAL: Module fuse not found.
ntfs-3g-mount: fuse device is missing, try 'modprobe fuse' as root
I have... (3 Replies)
Hi Team ,
Team Can any give me a good explanation of mount file system.:wall:if we have do a df -k it show /var/orcl/abc/txt mounted on /var/orcl.
example :
Filesystem 1K-blocks Used Available Use% Mounted on
tmpfs 4021876 0 ... (2 Replies)
The server ip is 10.2.2.24. I have installed nfs-utils package the i have edited /etc/exports
i have added the following line
/home 10.2.2.0/24(rw,sync,no_root_squash,no_all_squash)
i have saved, i have started the nfs service, then i am trying to mount nfs sharing from client machine using... (5 Replies)
Discussion started by: ainstin
5 Replies
LEARN ABOUT SUNOS
xfs_admin
xfs_admin(8) System Manager's Manual xfs_admin(8)NAME
xfs_admin - change parameters of an XFS filesystem
SYNOPSIS
xfs_admin [ -eflpu ] [ -c 0|1 ] [ -L label ] [ -U uuid ] device
DESCRIPTION
xfs_admin uses the xfs_db(8) command to modify various parameters of a filesystem.
Devices that are mounted cannot be modified. Administrators must unmount filesystems before xfs_admin or xfs_db(8) can convert parameters.
A number of parameters of a mounted filesystem can be examined and modified using the xfs_growfs(8) command.
OPTIONS -e Enables unwritten extent support on a filesystem that does not already have this enabled (for legacy filesystems, it can't be dis-
abled anymore at mkfs time).
-f Specifies that the filesystem image to be processed is stored in a regular file at device (see the mkfs.xfs -d file option).
-j Enables version 2 log format (journal format supporting larger log buffers).
-l Print the current filesystem label.
-p Enable 32bit project identifier support (PROJID32BIT feature).
-u Print the current filesystem UUID (Universally Unique IDentifier).
-c 0|1 Enable (1) or disable (0) lazy-counters in the filesystem. This operation may take quite a bit of time on large filesystems as the
entire filesystem needs to be scanned when this option is changed.
With lazy-counters enabled, the superblock is not modified or logged on every change of the free-space and inode counters. Instead,
enough information is kept in other parts of the filesystem to be able to maintain the counter values without needing to keep them
in the superblock. This gives significant improvements in performance on some configurations and metadata intensive workloads.
-L label
Set the filesystem label to label. XFS filesystem labels can be at most 12 characters long; if label is longer than 12 characters,
xfs_admin will truncate it and print a warning message. The filesystem label can be cleared using the special "--" value for label.
-U uuid
Set the UUID of the filesystem to uuid. A sample UUID looks like this: "c1b9d5a2-f162-11cf-9ece-0020afc76f16". The uuid may also
be nil, which will set the filesystem UUID to the null UUID. The uuid may also be generate, which will generate a new UUID for the
filesystem.
The mount(8) manual entry describes how to mount a filesystem using its label or UUID, rather than its block special device name.
SEE ALSO mkfs.xfs(8), mount(8), xfs_db(8), xfs_growfs(8), xfs_repair(8), xfs(5).
xfs_admin(8)