11-13-2012
HBA data traffic monitor in Solaris 10.
Hi All
We have T4-4 Server with 2 HBA configured for SAN connectivity. We want to monitor Data traffice going through these HBA. On other AIX system we have that capability with nmon. Following screen shows nmon HBA monitoring can we achieve same in Solaris 10.
+----------------------------------------------------------------------------------------------------------------------------------
+-topas_nmon--2=Top-Child-CPU----Host=secdv1-----Refresh=2 secs---08:51.45-----------------------------------------------------+
| Fibre-Channel-Adapter -----------------------------------------------------------------------------------------------------------|
| Adapter Receive Transmit -Requests- --Size KB-- |
|Number Name KB/s KB/s In Out In Out |
| 1 fcs0 0.6 0.0 2.5 0.0 0.2 0.0 |
| 2 fcs1 0.6 2.0 2.5 0.5 0.2 4.0 |
| 3 fcs2 0.6 2.0 2.5 0.5 0.2 4.0 |
| 4 fcs3 0.6 2.0 2.5 0.5 0.2 4.0 |
| Totals 0.0 0.0 MB/s 9.9 1.5 |
|----------------------------------------------------------------------------------------------------------------------------------|
| |
---------- Post updated at 08:55 AM ---------- Previous update was at 08:52 AM ----------
+-----------------------------------------------------------------------------------------
+-topas_nmon--2=Top-Child-CPU----Host=secdv1-----Refresh=2 secs---08:51.45-------------------------------------+
| Fibre-Channel-Adapter -----------------------------------------------------------------------------------------------------------|
| Adapter Receive Transmit -Requests- --Size KB-- |
|Number Name KB/s KB/s In Out In Out |
| 1 fcs0 0.6 0.0 2.5 0.0 0.2 0.0 |
| 2 fcs1 0.6 2.0 2.5 0.5 0.2 4.0 |
| 3 fcs2 0.6 2.0 2.5 0.5 0.2 4.0 |
| 4 fcs3 0.6 2.0 2.5 0.5 0.2 4.0 |
| Totals 0.0 0.0 MB/s 9.9 1.5 |
|---------------------------------------------------------------------------------------|
| |
8 More Discussions You Might Find Interesting
1. Solaris
Hi ,
How can I collect information about any Hardware , specially HBA (Host Bus Adapter) ....
I tried prtdiag but it is not shoing the HBA details.
Regards (4 Replies)
Discussion started by: adel8483
4 Replies
2. UNIX for Advanced & Expert Users
Hi,
I'm trying to determine which HBA cards are installed on my Solaris 10 (Sun-Fire-V240) machine.
The relevant data I have is below, but from it I cannot ascertain for sure if I have Emulex 10000 or 11000 HBA cards.
Can anyone suggest how to determine my HBA hardware ?
Thanks,
Ron.
... (3 Replies)
Discussion started by: ronbarak
3 Replies
3. Solaris
Hi,
I'm trying to determine which HBA cards are installed on my Solaris 10 (Sun-Fire-V240) machine.
The relevant data I have is below, but from it I cannot ascertain for sure if I have Emulex 10000 or 11000 HBA cards.
Can anyone suggest how to determine my HBA hardware ?
Thanks,
Ron.
... (4 Replies)
Discussion started by: ronbarak
4 Replies
4. Solaris
Hello,
In Solaris 10 I can use fcinfo to find what speed the hba ports are running at, am I able to find this out using Solaris 9? I have tried a few variations on luxadm but cant find anything relevant.
Thanks. (1 Reply)
Discussion started by: Actuator
1 Replies
5. Red Hat
How to monitor network device traffic using MRTG?
How can I add network devices in MRTG configuration to monitor? (2 Replies)
Discussion started by: manalisharmabe
2 Replies
6. Solaris
I have one disk that is reporting I/O errors but the same LUN mounted on a different node is able to access it without issue, is there a way to identify which HBA is being used for the LUN without swapping each out at a time? (4 Replies)
Discussion started by: thmnetwork
4 Replies
7. UNIX for Advanced & Expert Users
Hi All,
I successfully configured a DEBIAN Lenny bridged firewall
using ebtables.
The bridged interface is br0.
The ethernet interface are eth0 & eth1 respectively.
All the traffic are transparently passing my firewall but i need to find & block temporarily the bandwidth abusers.
Can... (1 Reply)
Discussion started by: coolatt
1 Replies
8. IP Networking
My son does homework on a school laptop. I was thinking about setting up a gateway on my home network, so that I can monitor web traffic and know if he is doing his homework without standing over his shoulder. Ideally I would like to use the Raspberry Pi Model b that I already have. However, I... (15 Replies)
Discussion started by: gandolf989
15 Replies
LEARN ABOUT OPENSOLARIS
scsi_hba_fini
scsi_hba_init(9F) Kernel Functions for Drivers scsi_hba_init(9F)
NAME
scsi_hba_init, scsi_hba_fini - SCSI Host Bus Adapter system initialization and completion routines
SYNOPSIS
#include <sys/scsi/scsi.h>
int scsi_hba_init(struct modlinkage *modlp);
void scsi_hba_fini(struct modlinkage *modlp);
INTERFACE LEVEL
Solaris architecture specific (Solaris DDI).
PARAMETERS
modlp Pointer to the Host Bus Adapters module linkage structure.
DESCRIPTION
scsi_hba_init()
scsi_hba_init() is the system-provided initialization routine for SCSI HBA drivers. The scsi_hba_init() function registers the HBA in the
system and allows the driver to accept configuration requests on behalf of SCSI target drivers. The scsi_hba_init() routine must be called
in the HBA's _init(9E) routine before mod_install(9F) is called. If mod_install(9F) fails, the HBA's _init(9E) should call scsi_hba_fini()
before returning failure.
scsi_hba_fini()
scsi_hba_fini() is the system provided completion routine for SCSI HBA drivers. scsi_hba_fini() removes all of the system references for
the HBA that were created in scsi_hba_init(). The scsi_hba_fini() routine should be called in the HBA's _fini(9E) routine if mod_remove(9F)
is successful.
RETURN VALUES
scsi_hba_init() returns 0 if successful, and a non-zero value otherwise. If scsi_hba_init() fails, the HBA's _init() entry point should
return the value returned by scsi_hba_init().
CONTEXT
scsi_hba_init() and scsi_hba_fini() should be called from _init(9E) or _fini(9E), respectively.
SEE ALSO
_fini(9E), _init(9E), mod_install(9F), mod_remove(9F), scsi_pktalloc(9F), scsi_pktfree(9F), scsi_hba_tran(9S)
Writing Device Drivers
NOTES
The HBA is responsible for ensuring that no DDI request routines are called on behalf of its SCSI target drivers once scsi_hba_fini() is
called.
SunOS 5.11 1 Nov 1993 scsi_hba_init(9F)