hello,
I am creating a application in which I first open the serial port and then create the thread..for reading the data comming through that serial port. from that same thread I create another thread that is write thread means for writing on the serial port...
I am continously polling again... (3 Replies)
hello,
I am gettin problem while sending and recieving data through seial port...
when I am sending Data then the reciever end is not able to recieve that data .....
Reciever end is running in infinite loop just polling after some time to check that there is data on the port and then again... (9 Replies)
Hello all ,
i have change my system debian linux to freebsd( pcBSD)
all working as well , but the serial does not work correctly.
Under linux the problem does not appears.
my problem is than my serial port does work .
the first step than i have make is look with dmesg if my serial are... (0 Replies)
I am working with solaris 9 sparc and I want to connect physical device in serial port but when I am connecting it,It is showing the error window saying--
So can any1 tell me the reason or is there any package I have to add to work with serial port??? (2 Replies)
i am having some coding problem in c for interfacing the GSM module through serial port. i want to send/receive sms. i have done all the setting for the port and know the AT command to use in this but i am actually having problem in reading and writing from serial port how to handle the signal when... (1 Reply)
A neighbour's Ubuntu 10.04 machine has five serial ports, one on the motherboard and four on a PCI card. However, only four cards are showing:
# dmesg | grep tty
console enabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
... (2 Replies)
Hi,
I have a external board connected to my serial port. I need to execute "shutdown -r now" command when system boot up. When system boots up it requires a username ans password. Then I need to run my command. I can use rc script but that is rebooting system before it asks for username and... (0 Replies)
Hi Everyone,
In my environment, I have few T5220. On the iLOM Management Card, I have both Network and Serial port are cabled, I don't have any issues while I try to connect using Network Management port, but when I try to connect the serial port for the same server which is actually connected... (3 Replies)
Hi
I try to communicate with a GSM modem, from C, for sending SMS.
I use standart AT-commands.
Working well with terminal.
There is no problem writing ti the port.
But when I try to read I only get a echo, I write "ATI" and get "ATI" back, I should get somthing like "SIEMENS 35... (4 Replies)
Hello,
I have an unloaded T5140 machine and want to access the ILOM for the first time and subsequently the network port after that., and then load Solaris 10 the final January 2011 build.
The first part is what confuses me -the cabling.
I am coming from a Windows machine (w/appropriate... (5 Replies)
Discussion started by: joboy
5 Replies
LEARN ABOUT OSF1
dc
dc(7) Miscellaneous Information Manual dc(7)NAME
dc - serial line/mouse/keyboard
SYNOPSIS
controller dc0 at ibus0 slot 0 vector dcintr
DESCRIPTION
The dc serial line controller provides DECstation 2100, DECstation 3100, DECstation 5000, and DECstation 5100 computer systems with key-
board, mouse, and serial communications interfaces. The serial communications interfaces on the DECstation 2100 and DECstation 3100 provide
partial modem control. The serial communications interfaces on the DECstation 5000 provide full modem control. The device special file
/dev/tty01 on a DECstation 5100 provides full modem control, while the remaining ports provide no modem control at all. All serial commu-
nications interfaces operate at baud rates from B50 to B9600, excluding B200.
The dc ports are used as follows: Usage Graphics device keyboard at 4800 BPS Mouse or tablet at 4800 BPS Communications port 1 (w/modem
control)/local terminal Communications port 2 (w/modem control)/local terminal
On all systems except the DECstation 5100, serial port 2 is used for the system console port in server (that is, non-graphics) configura-
tions. On DECstation 5100s, the serial port labeled 3 on the back of the system is always the system console port. The serial system con-
sole port always operates at 9600 BPS, 8-bits, no parity; modem control is not supported.
RESTRICTIONS
Data communications equipment attached to the console serial port in server configurations must be set to 9600 BPS, 8-bits, no parity. The
scc driver enforces this restriction.
FILES
console terminal local terminal local terminal local terminal (DECstation 5100 only)
RELATED INFORMATION console(7), devio(7), tty(7), MAKEDEV(8) delim off
dc(7)