No help, just amusing. The "dumb message of the day" award goes to fdisk
I'm not experiencing the problems you are with pvcreate. Can you remove the PV and rescan it and start from scratch? (unless, of course, someone has a better idea, or, of course, sdb1 is actually being used!).
... I tried creating an extended partition to see if that caused a problem, then got that silly 'error'. It's of no consequence to your issue, just amusing.
Hello,
I need explanations about physical disks and physical volumes. What is the difference between these 2 things?
In fact, i am trying to understand what the AIX lspv2command does.
Thank you in advance. (2 Replies)
I was in smit, checking on disc space, etc. and it appears that one of our physical volumes that is part of a large volume group, has no free physical partitions. The server is running AIX 5.1. What would be the advisable step to take in this instance? (9 Replies)
Hello All,
I Am A New Member To This Group.
I Want To Know How Can We Create Single Volume Group Using 2 Hard Disks.
As We Require More Data To Be Stored We Need To Add A Hard Disk,but I Have A Doubt Whether We Can Increase The Size Of A Logical Volume Mounted On A Volume Group By Adding A... (5 Replies)
Hello,
I have logical volume group of 50GB, in which I have 2 logical volumes, LogVol01 and LogVol02, both are of 10GB.
If I extend LogVol01 further by 10GB, then it keeps the extended copy after logical volume 2. I want to know where it keeps this information
Regards
Himanshu (3 Replies)
Hi!
Can anyone help me on how I can do a basic check on the Unix filesystems / physical volumes and logical volumes?
What items should I check, like where do I look at in smit? Or are there commands that I should execute?
I need to do this as I was informed by IBM that there seems to be... (1 Reply)
:eek:
Hi guys,
I'm pulling my hair out over this one. I am trying to set up a virtual server environment. ( I am using VirtualBox, but I think this is irrelevant to this problem.) I have downloaded a pre-packaged Linux virtual disk, with which I have successfully started a virtual instance of a... (4 Replies)
This is the report I got running the comand rptconf, but I would like to know what is the capacity of the disks installed into our server power 6 with AIX
System Model: IBM,7778-23X
Machine Serial Number: 1066D5A
Processor Type: PowerPC_POWER6
Processor Implementation Mode: POWER 6... (6 Replies)
Hi,
I am new to unix. I am working on Red Hat Linux and side by side on AIX also. After reading the concepts of Storage, I am now really confused regarding the terminologies
1)Physical Volume
2)Volume Group
3)Logical Volume
4)Physical Partition
Please help me to understand these concepts. (6 Replies)
Hello everyone,
I just read that while creating a logical volume(LV) we can choose the region of the physical volume (PV) in which the LV should be created.
When I say region I mean: outer edge - outer middle - center - inner middle and inner edge.
Can anyone help me understand the utility... (11 Replies)
I want to start by saying I already resolved my issue but I want to understand why I am seeing what I am seeing.
I have a server with a RAID controller two 500GB drives and six 600GB drives. The two 500GB drives are mirrored and have the OS installed on them. The six 600GB they wanted set as... (4 Replies)
Discussion started by: scotbuff
4 Replies
LEARN ABOUT OSF1
disktab
disktab(4) Kernel Interfaces Manual disktab(4)NAME
disktab - Disk description file
SYNOPSIS
#include <sys/disklabel.h>
DESCRIPTION
The disktab database describes disk geometries and disk partition characteristics. It is used to initialize the disk label on the disk.
The format is patterned after the termcap terminal database. Entries in a disktab file consist of a number of : (colon) separated fields.
The first entry for each disk gives the names which are known for the disk, separated by | (vertical bar) characters. The last name given
should be a long name fully identifying the disk.
The following list indicates the normal values stored for each disk entry: Type Description str Type of disk (for example, removable, win-
chester) str Type of controller (for example, SMD, ESDI, floppy) num Number of sectors per track num Number of tracks per cylinder
num Total number of cylinders on the disk num Number of sectors per cylinder, nc*nt default num Number of sectors per unit, sc*nc
default num Sector size in bytes, DEV_BSIZE default bool Controller supports bad144-style bad sector forwarding num Rotation speed,
rpm, default 3600 num Sector skew per track, default 0 num Sector skew per cylinder, default 0 num Headswitch time, usec, default 0
num One-cylinder seek time, usec, default 0 num Sector interleave (n:1), default 1 num Drive-type-dependent parameters num Boot block
size, default BBSIZE num Superblock size, default SBSIZE num Block size for partition `a' (bytes) num Block size for partition `d'
(bytes) num Block size for partition `e' (bytes) num Block size for partition `f' (bytes) num Block size for partition `g' (bytes)
num Block size for partition `h' (bytes) num Fragment size for partition `a' (bytes) num Fragment size for partition `d' (bytes)
num Fragment size for partition `e' (bytes) num Fragment size for partition `f' (bytes) num Fragment size for partition `g' (bytes)
num Fragment size for partition `h' (bytes) num Offset of partition `a' in sectors num Offset of partition `b' in sectors num Offset of
partition `c' in sectors num Offset of partition `d' in sectors num Offset of partition `e' in sectors num Offset of partition `f' in
sectors num Offset of partition `g' in sectors num Offset of partition `h' in sectors num Size of partition `a' in sectors num Size of
partition `b' in sectors num Size of partition `c' in sectors num Size of partition `d' in sectors num Size of partition `e' in sectors
num Size of partition `f' in sectors num Size of partition `g' in sectors num Size of partition `h' in sectors str Partition type of
partition `a' (4.2BSD file system, swap, etc.) str Partition type of partition `b' str Partition type of partition `c' str Parti-
tion type of partition `d' str Partition type of partition `e' str Partition type of partition `f' str Partition type of partition `g'
str Partition type of partition `h'
EXAMPLES
The following is an example disktab entry:
rz25|RZ25|DEC RZ25 Winchester:
:ty=winchester:dt=SCSI:ns#62:nt#9:nc#1492:
:oa#0:pa#131072:ba#8192:fa#1024:
:ob#131072:pb#262144:bb#8192:fb#1024:
:oc#0:pc#832527:bc#8192:fc#1024:
:od#393216:pd#146437:bd#8192:fd#1024:
:oe#539656:pe#146437:be#8192:fe#1024:
:of#686096:pf#146437:bf#8192:ff#1024:
:og#393216:pg#439311:bg#8192:fg#1024:
:oh#0:ph#0:bh#8192:fh#1024:
FILES
/etc/disktab
RELATED INFORMATION
Functions: getdiskbyname(3)
Files: disklabel(4)
Commands: disklabel(8), newfs(8) delim off
disktab(4)