DHCP is getting different class of IP than host machine on Solaris 10 Post: 302727331

10 More Discussions You Might Find Interesting

1. UNIX for Dummies Questions & Answers

Solaris Machine IP Configuration via DHCP

I have a new solaris machine and I am trying to bring the same on network. The IP assignemnt is via DHCP. I want to know as which files need to be modified to include DHCP server IP in order that the machine gets its IP via DHCP server. Thanks in Advance. :)

2. Shell Programming and Scripting

Delete Blank Lines Between DHCP Host Blocks

Hi All, I have a dhcpd.conf file that gets static hosts added and removed via a shell script. After sometime, there becomes huge gaps of space ( blank lines ) between each host block. I tried a couple of sed one-liners; but, I can't seem to get the output I'm looking for. Also, I would like...

3. Solaris

Solaris virtual machine access on host os

Hi I have two solaris 10 virtual machines on my Vista laptop. I want to access both machines using putty in vista. I used DHCP while installing virtual machines. one machine gets the ip address and other does not. What is the problem? can i assign a static ip address if yes how? ...

4. UNIX for Dummies Questions & Answers

Host ID in Solaris Machine

Hi, On doing reinstallation of Solaris 10 OS, does an existing host id change? Regards, Thiru

5. Linux

dhcp what does vendor-class-identifier, 0, 9 mean?

dhcp what does vendor-class-identifier, 0, 9 mean? match if substring(option vendor-class-identifier, 0, 9) = "PXEClient";

6. Solaris

How to configure the host to dhcp mode

I try a static ip assign mode while i installed the Solaris 10(U 8). But i can't access the internet, i try the ifconfig -a command and see my configuration is correct in the interface. So i want to get my ip using dhcp. I search from internet. They give me the suggestions. ifconfig interface...

7. Solaris

Change hostID of Solaris 10 virtual/guest machine installed by Virtual Box 4.1.12 on Windows-XP host

Trying to set or modify the randomly set hostID of a Solaris 10 virtual/guest machine that I installed on a Windows-XP host machine (using Virtual Box 4.1.12). I was able to set/modify the hostname of the Solaris 10 virtual/guest machine during installation as well as via the Virtual Box...

8. Hardware

USB interface to HP ux R Class machine

mine current HP R class machine comes with scsi but not usb port. i am thinking it is possible to get a scsi to usb converter to help to connect usb-enabled devices such as usb-enabled dvd writer, usb-enabled portable hard disk. pls advise. thanks :)

9. Linux

Dhcp in use or not for Linux machine

Hi All. Can anyone let me know the smartest and fullprrof method of checkking whther any given linux machine is using DHCP or not? # ps -ef | grep dhcp gives output like below : root 3251 3128 0 11:02 pts/0 00:00:00 grep dhcp so i dont think its full proof method , please...

10. Solaris

Dhcp in use or not on Solaris machine

Hi All, Could you please let me know how can we check whether any given solaris machien is using DHCP or not. is ps -ef | grep dhcp is full proof method or is their any other way.

LEARN ABOUT FREEBSD

ntb

NTB(4)							   BSD Kernel Interfaces Manual 						    NTB(4)

NAME

     ntb, ntb_hw, if_ntb -- Intel(R) Non-Transparent Bridge driver

SYNOPSIS

     To compile this driver into your kernel, place the following lines in your kernel configuration file:

	   device ntb_hw
	   device if_ntb

     Or, to load the driver as a module at boot, place the following line in loader.conf(5):

	   if_ntb_load="YES"

DESCRIPTION

     The ntb driver provides support for the Non-Transparent Bridge (NTB) in the Intel S1200, Xeon E3 and Xeon E5 processor families.

     The NTB allows you to connect two computer systems using a PCI-e link if they have the correct equipment and connectors.

CONFIGURATION

     The NTB memory windows need to be configured by the BIOS.	If your BIOS allows you to set their size, you should set the size of both memory
     windows to 1 MiB.	This needs to be done on both systems.

     Each system needs to have a different IP address assigned.  The MAC address is randomly generated.  Also for maximum performance, the MTU
     should be set to 16 kiB.  This can be done by adding the line below to rc.conf(5):

	   ifconfig_ntb0="inet 192.168.1.10 netmask 255.255.255.0 mtu 16384"

     And on the second system :

	   ifconfig_ntb0="inet 192.168.1.11 netmask 255.255.255.0 mtu 16384"

     If you are using the UDP protocol, you may want to increase the net.inet.udp.maxdgram sysctl(8) variable.

SEE ALSO

     rc.conf(5), sysctl(8)

AUTHORS

     The ntb driver was developed by Intel and originally written by Carl Delsey <carl@FreeBSD.org>.

BUGS

     If the driver is unloaded, it cannot be reloaded without a system reboot.

     The network support is limited.  It isn't fully configurable yet.	It also isn't integrated into netgraph(4) or bpf(4).

     NTB to Root Port mode is not yet supported.

     There is no way to protect your system from malicious behavior on the other system once the link is brought up.  Anyone with root or kernel
     access on the other system can read or write to any location on your system.  In other words, only connect two systems that completely trust
     each other.

BSD
								   Apr 11, 2013 							       BSD