Login or Register to Ask a Question and Join Our Community

Sponsored Content
Full Discussion: What is this error log = hda: irq timeout: error=0x00 and how to solve?
Top Forums Shell Programming and Scripting What is this error log = hda: irq timeout: error=0x00 and how to solve? Post 302726475 by kristinu on Sunday 4th of November 2012 12:19:06 PM
Old 11-04-2012
Another possibility is a very old and slow disc or a dirty or slightly corroded connector. Since
it is easy, cheap, and quick to try to fix up a possible connector problem, that's what I'd try first.

---------- Post updated at 12:12 PM ---------- Previous update was at 12:11 PM ----------

My first step would be to power down, and reseat the disc cables. I'd pull them back about 1/2
the way it would take to disengage the connectors, "rock" them back and forth a few times, then
reseat them fully back. I'd do the same with the power supply connectors to the discs. If you have
an older machine with a separate disc controller board, then I'd remove and reseat the controller
board to the motherboard connector, as well.

---------- Post updated at 12:15 PM ---------- Previous update was at 12:12 PM ----------

Otherwise I'd suggest you do a full backup with verification.

If the problem persists, then you can just continue to use it, knowing that it may fail at any moment,
but that you won't lose anything you can't easily reconstruct.

One thing about hard drives I can guarantee you: eventually all of them fail.

---------- Post updated at 12:19 PM ---------- Previous update was at 12:15 PM ----------

If you have a distro which can use SMART, and your disc is SMART capable, you can ask it.

Code:
smartctl -i /dev/hda

will tell you whether you have a SMART capable disc, and whether it be enabled. If your disc
is SMART capable, but it is not enabled, then enable it.

Code:
 smartctl --smart=on --offlineauto=on --saveauto=on /dev/hda

If so, then

Code:
  smartctl --health /dev/hda

will give you a pass/fail diagnostic message.

Code:
 smartctl -a /dev/hda

will give you more information about what may be wrong, if anything.
Last edited by kristinu; 11-05-2012 at 06:45 AM..
 

10 More Discussions You Might Find Interesting

1. UNIX for Dummies Questions & Answers

Timeout Error

I'm getting a error on a old SPARC Station 5 system. The HDD I am using in internal 18GB. Everything use to work, and well wont now. The error I am getting is in bootup. The error is 'Timeout waiting for ARP?RARP packet error'. Anyone got any idea how I can fix this? I'm not sure... (4 Replies)
Discussion started by: merlin
4 Replies

2. UNIX for Advanced & Expert Users

Linux System with Strange IRQ Error

Hi one of our Linux machine from our Data Farm have constantly hang and instable. I found out from the console the below error. Does anyone encounter this problem or see this error before with a glimpse on what it could be.. ? --------------------------------------------------------------- ... (1 Reply)
Discussion started by: killerserv
1 Replies

3. Programming

how to solve error : Bind: Address Already in Use

hi i have created socket program with proper IP address and port no client side port no 1085 and 1086 gateway side port no 1086 and 1085 and port no 1087 and 1088 receiver side port no 1088 and 1087 well it works fine on client and gateway side not on receiver and gateway side... (2 Replies)
Discussion started by: bhakti
2 Replies

4. Shell Programming and Scripting

Test argument error, unable to solve

Here is an awk statement i am using to sum a series of numbers.. awk -F"," '{ for (i=1; i<=NF ; ++i) sum += $i;} # if (i > max) max=i } END { s=""; for (i=1; i<=max; ++i) { printf "%s%s", s, sum; s=","; } printf "\n" }' filename.csv It works fine for the summing part. But since my series... (19 Replies)
Discussion started by: pravsripad
19 Replies

5. UNIX for Dummies Questions & Answers

i dont know how to solve this error

can while do make aloop as do while in c language ? (1 Reply)
Discussion started by: teefa
1 Replies

6. Solaris

weblogic connection timeout error

i am facing an issue that the server give a connection timeout after 60 sec for any request more than that number . i tried to increase the TCP INTERVAL TIMEOUT from the default 60000 ms to more higher number. the server seems to work fine and didn't give me the massage of the timeout but the... (0 Replies)
Discussion started by: core99
0 Replies

7. Shell Programming and Scripting

How to solve awk: line 1: runaway string constant error?

Hi All ! I am just trying to print bash variable in awk statement as string here is my script n=1 for file in `ls *.tk |sort -t"-" -k2n,2`; do ak=`(awk 'FNR=='$n'{print $0}' res.dat)` awk '{print "'$ak'",$0}' OFS="\t" $file n=$((n+1)) unset ak doneI am getting following error awk:... (7 Replies)
Discussion started by: Akshay Hegde
7 Replies

8. Solaris

How to solve this Error. I/O Error.?

Hi Guys, I just got this error:- Your "cron" job on server2 /usr/5bin/ssh sysmgr@server1 /usr/local/bin/sudo /opt/local/pdm/bin/mount_pdmprod produced the following output: ** /dev/rdsk/c1t5006016C446023DEd0s2 ** /dev/rdsk/c1t5006016C446023DEd1s2 ** /dev/rdsk/c1t5006016C446023DEd2s2... (2 Replies)
Discussion started by: manalisharmabe
2 Replies

9. Shell Programming and Scripting

How to solve ambigious redirect error?

hi all, i had the below script filename = /osa/data1/output.txt printf '%27s%53s\n' ' CURRENT DATE' 26-08-2014 >> $filename iam getting the ambigiuos redirect error in the 2nd line of the code...please guide me regards, vasa saikumar (3 Replies)
Discussion started by: hemanthsaikumar
3 Replies

10. Red Hat

How to solve TCP connection timeout (not in ssh)?

HI We have some Red Hat Linux Sevres which is having TCP connection timeout, not SSH connection, as an example oracle connection connected from TOD. SSH i managed to add keepalive and it's working fine (1 Reply)
Discussion started by: bentech4u
1 Replies

LEARN ABOUT DEBIAN

gsmartcontrol

GSmartControl(1)						   User Commands						  GSmartControl(1)

NAME

       GSmartControl - Hard disk drive health inspection tool

SYNOPSIS

       gsmartcontrol [OPTIONS]

       gsmartcontrol-root [<desktop> [OPTIONS]]

DESCRIPTION

       GSmartControl  is  a  graphical user interface for smartctl (from smartmontools), which is a tool for querying and controlling SMART (Self-
       Monitoring, Analysis, and Reporting Technology) data on modern hard disk drives. It allows you to inspect the drive's SMART data to  deter-
       mine its health, as well as run various tests on it.

       This manual page documents briefly the gsmartcontrol and gsmartcontrol-root commands.

       gsmartcontrol-root command launches gsmartcontrol with administrative privileges. The desktop argument specifies which desktop is currently
       running, for automatic selection of native su mechanism. Valid values for desktop are auto, kde, gnome, other.

OPTIONS

   Help Options:
       -?, --help
	      Show help options

       --help-all
	      Show all help options

       --help-gtk
	      Show GTK+ options

       --help-debug
	      Show logging options

   Application Options:
       -l, --no-locale
	      Disable locale

       -V, --version
	      Display version information

       --no-scan
	      Don't scan devices on startup

       --no-hide-tabs
	      Don't hide non-identity tabs when SMART is disabled. Useful for debugging.

       --add-virtual
	      Load smartctl data from file, creating a virtual drive

       --add-device
	      Add this device to device list. Useful with --no-scan to list certain drives only.

       --display=DISPLAY
	      X display to use

       -v, --verbose
	      Enable verbose logging; same as --verbosity-level 5

       -q, --quiet
	      Disable logging; same as --verbosity-level 0

       -b, --verbosity-level
	      Set verbosity level [0-5]

COPYRIGHT

       Copyright (C) 2008 - 2009  Alexander Shaduri <ashaduri 'at' gmail.com>

AUTHOR

       This manual page was originally written by Giuseppe Iuculano <giuseppe@iuculano.it>, for the Debian project.

gsmartcontrol															  GSmartControl(1)
All times are GMT -4. The time now is 04:31 PM.
Unix & Linux Forums Content Copyright 1993-2022. All Rights Reserved.
Privacy Policy