Help to get correct data using awk Post: 302726369

10 More Discussions You Might Find Interesting

1. Shell Programming and Scripting

Conversion of Exponential to numeric in awk- not correct output

Hi All, I have 1 million records file. Using awk, I am counting the number of records. But as the number is huge, after crossing a number, awk is displaying it in exponential format. At the end, I need to verify this count given by awk with expected count. But as it is in exponential format,...

2. Shell Programming and Scripting

AWK not giving me correct output.

i have a line like this in my script IP=`get_IP <hostname> | awk '{ print $1 }' echo $IP the problem is get_IP <hostname> returns data formated as follows: ip 1.1.1.1 name server_name the code above returns 1.1.1.1 server_name and i just need the 1.1.1.1 I have tried to add "|...

3. Shell Programming and Scripting

Awk error -- awk: 0602-562 Field $() is not correct.

typeset -i i=1 while read -r filename; do Splitfile=`$Targetfile_$i.txt` awk 'substr($0,1,5) == substr($filename,1,5) && substr($0,526,2) == substr($filename,6,2) && substr($0,750,12) == substr($filename,8,12)' $SourceFilename >> $Splitfile i=i+1 done < /tmp/list.out I am using this logic...

4. Shell Programming and Scripting

AWK or SED for correct columns

Hello, I have the following file, but one of his columns is not in place, and tried with SED and AWK, how I can correct format? In the second line break is wrong, and puts it after the first column of next line I would appreciate if you could guide me on the subject.

5. Shell Programming and Scripting

Using AWK to Calculate Correct Responses

Hello, I am trying to count how many times a subject makes a correct switch or a correct stay response in a simple task. I have data on which condition they were in (here, labeled "IMAGINE" and "RECALL"), as well as whether they made a left or right button response, and whether the outcome was...

6. Shell Programming and Scripting

Cannot get the correct ans. Using awk in taking average

Hi all, I think so I’m getting the result is wrong, while using following awk commend, colval=$(awk 'FNR>1 && NR==FNR{a=$4;next;} FNR>1 {a+=$4; print $2"\t"a/3}' filename_f.tsv filename_f2.tsv filename_f3.tsv) echo $colval >> Result.tsv it’s doing the condition 2 times, first result...

7. Shell Programming and Scripting

How to correct this awk code without eval?

Hi everyone, The following piece of awk code works fine if I use eval builtin var='$1,$2' ps | eval "awk '{print $var}'" But when I try to knock off eval and use awk variable as substitute then I am not getting the expected result ps | awk -v v1=$var '{print v1}' # output is $1,$2 ps |...

8. Shell Programming and Scripting

Shell script to correct the data

Hi, I have below data in my flat file.I would like to remove the quotes and comma necessary from the data.Below is the details I would like to have in my output. Could anybody help me providing the Unix shell script for this. Input : ABC,ABC,10/15/2012,"47,936,164.567 ","1,036,997.453...

9. Programming

Correct way to read data of different formats into same struct

I was wondering what is the correct way to read in data "one-part-per-line" as compared with "one-record-per-line" formats into the same structure in C? format1.dat: Zacker 244.00 244.00 542.00 Lee 265.00 265.00 456.00 Walter 235.00 235.00 212.00 Zena 323.00 215.45 ...

10. Shell Programming and Scripting

awk output is not the correct count

The awk below runs and produces the following output on the file2. This is just an example of the format as the file is ~14MB. file1.txt is attached. I am trying to count the ids that match between the two files and out the ids that are missing. Thank you :). file2 970 NM_213590 ...

LEARN ABOUT DEBIAN

wdmd

WDMD(8) 						      System Manager's Manual							   WDMD(8)

NAME

       wdmd - watchdog multiplexing daemon

SYNOPSIS

       wdmd [OPTIONS]

DESCRIPTION

       This  daemon opens /dev/watchdog and allows multiple independent sources to detmermine whether each KEEPALIVE is done.  Every test interval
       (10 seconds), the daemon tests each source.  If any test fails, the KEEPALIVE is not done.  In a standard configuration, the watchdog timer
       will  reset the system if no KEEPALIVE is done for 60 seconds ("fire timeout").	This means that if single test fails 5-6 times in row, the
       watchdog will fire and reset the system.  With multiple test sources, fewer separate failures back to back can also cause a reset, e.g.

       T seconds, P pass, F fail
       T00: test1 P, test2 P, test3 P: KEEPALIVE done
       T10: test1 F, test2 F, test3 P: KEEPALIVE skipped
       T20: test1 F, test2 P, test3 P: KEEPALIVE skipped
       T30: test1 P, test2 F, test3 P: KEEPALIVE skipped
       T40: test1 P, test2 P, test3 F: KEEPALIVE skipped
       T50: test1 F, test2 F, test3 P: KEEPALIVE skipped
       T60: test1 P, test2 F, test3 P: KEEPALIVE skipped
       T60: watchdog fires, system resets

       (Depending on timings, the system may be reset sometime shortly before T60, and the tests at T60 would not be run.)

       A crucial aspect to the design and function of wdmd is that if any single source does not pass tests for the fire timeout, the watchdog	is
       guaranteed  to fire, regardless of whether other sources on the system have passed or failed.  A spurious reset due to the combined effects
       of multiple failing tests as shown above, is an accepted side effect.

       wdmd will exit if a watchdog driver is not loaded.

       wdmd cannot be used on the system with any other program that needs to open /dev/watchdog, e.g. watchdog(8).

   Test Source: clients
       Using libwdmd, programs connect to wdmd via a unix socket, and send regular messages to wdmd to update an expiry time for their connection.
       Every test interval, wdmd will check if the expiry time for a connection has been reached.  If so, the test for that client fails.

       (Other test sources such as scripts executed each test interval may be added in the future.)

OPTIONS

       -D     Enable debugging to stderr and don't fork.

       -H num Enable (1) or disable (0) high priority features such as realtime scheduling priority and mlockall.
	      Default 1.

								    2011-08-01								   WDMD(8)

10 More Discussions You Might Find Interesting

1. Shell Programming and Scripting

Conversion of Exponential to numeric in awk- not correct output

Discussion started by: ssunda6

2. Shell Programming and Scripting

AWK not giving me correct output.

Discussion started by: mcdef

3. Shell Programming and Scripting

Awk error -- awk: 0602-562 Field $() is not correct.

Discussion started by: pukars4u

4. Shell Programming and Scripting

AWK or SED for correct columns

Discussion started by: nitwh