(1) It can ping itself by IP on both interfaces.
(2) Other hosts in the same subnet can ping bond0, but not eth1.
Thanks.
Quote:
Originally Posted by DGPickett
Can it ping itself by IP on both interfaces?
Can other hosts on either net ping it on both IP?
---------- Post updated at 09:07 AM ---------- Previous update was at 09:04 AM ----------
Here is the info:
Thanks.
Quote:
Originally Posted by Tommyk
the interface needs to be configured. Is the bond up and running?
As you haven't shown any other interface configurations you should have this entry in one of them (i.e. /etc/sysconfig/network-scripts/ifcfg-eth0)
Last edited by Scott; 10-26-2012 at 10:21 AM..
Reason: Code tags
Hello,
I've moved to a new network with multiple AIX box's. Most of them are working fine and dandy.
On one box I need to set up a static route to a gateway.. no problem right?
Whenever I add the route it appears in the routing table as UGc and then begins adding new entries to the... (1 Reply)
I have a string as "Period= 20090531 Client Name= Clayton Lumbar Company Destination= MD"
I want to parse the string and store it in 3 different variables.
$period (should get value 20090531)
$client (should get value "Clayton Lumbar company")
$dest (should get value MD)
How can I do... (3 Replies)
I have an IP routing issue or I am just to stupid to work it out myself.
I have setup am old PC running SUSE Linux 11.3 as a router, the system has 3 Interfaces connecting 3 networks.
Interface 1 = 10.164.2.161/21
Interface 2 = 192.168.1.210/24
Interface 3 = 30.1.0.11/16
The default... (6 Replies)
I have run into a wall troubleshooting a Centos 5 networking issue. Hoping someone can assist.
I've got a box with two vlans trunked over bond0
bond0 Link encap:Ethernet HWaddr 00:22:64:C1:D6:60
inet6 addr: fe80::222:64ff:fec1:d660/64 Scope:Link ... (0 Replies)
hello everyone!:)
I have an exercise which I think is difficult for beginner like me. Here is the exercise
Create a shell script, which takes a directory as command line argument.
Script displays ten first lines from every text file in that directory. After
displaying the lines from the... (1 Reply)
hi guys
suse 11 SP1 x64
I have a server (4 NIC ports 192.168.100.100-103) that connects point to point to a storage device (same thing 4 ports 192.168.110.100-113) but this server connects to normal LAN 10.6.100.x - gateway 10.6.100.1
the issue is when testing connectivity to the storage... (7 Replies)
we are not able to ping client server (falcon-ebr.sbms.bsc.com) from netbackup master server (135.179.96.122 tsprd-ebr.edc.single.net)
However from client server we are able to ping the master Server.
Please assist on this (1 Reply)
Hi,
Please help me on issue described below,
I have 4 machine setup, M1 -> M2 -> M3 | M4. And A laptop that can be reachable through both M3 and M4.
M2 has 2 NIC conected to M3 and M4. Now I want to divide the flow coming from M1 for laptop.
At M2, I have done following,... (1 Reply)
Discussion started by: rahulbhansali24
1 Replies
LEARN ABOUT DEBIAN
tc-bfifo
PBFIFO(8) Linux PBFIFO(8)NAME
pfifo - Packet limited First In, First Out queue
bfifo - Byte limited First In, First Out queue
SYNOPSIS
tc qdisc ... add pfifo [ limit packets ]
tc qdisc ... add bfifo [ limit bytes ]
DESCRIPTION
The pfifo and bfifo qdiscs are unadorned First In, First Out queues. They are the simplest queues possible and therefore have no overhead.
pfifo constrains the queue size as measured in packets. bfifo does so as measured in bytes.
Like all non-default qdiscs, they maintain statistics. This might be a reason to prefer pfifo or bfifo over the default.
ALGORITHM
A list of packets is maintained, when a packet is enqueued it gets inserted at the tail of a list. When a packet needs to be sent out to
the network, it is taken from the head of the list.
If the list is too long, no further packets are allowed on. This is called 'tail drop'.
PARAMETERS
limit Maximum queue size. Specified in bytes for bfifo, in packets for pfifo. For pfifo, defaults to the interface txqueuelen, as speci-
fied with ifconfig(8) or ip(8).
For bfifo, it defaults to the txqueuelen multiplied by the interface MTU.
OUTPUT
The output of tc -s qdisc ls contains the limit, either in packets or in bytes, and the number of bytes and packets actually sent. An
unsent and dropped packet only appears between braces and is not counted as 'Sent'.
In this example, the queue length is 100 packets, 45894 bytes were sent over 681 packets. No packets were dropped, and as the pfifo queue
does not slow down packets, there were also no overlimits:
# tc -s qdisc ls dev eth0
qdisc pfifo 8001: dev eth0 limit 100p
Sent 45894 bytes 681 pkts (dropped 0, overlimits 0)
If a backlog occurs, this is displayed as well.
SEE ALSO tc(8)AUTHORS
Alexey N. Kuznetsov, <kuznet@ms2.inr.ac.ru>
This manpage maintained by bert hubert <ahu@ds9a.nl>
iproute2 10 January 2002 PBFIFO(8)