Hi, The default gateway (172.17.220.1) cannot be pinged via the default interface bond0 (172.17.220.231), but can be pinged via interface eth1 (10.201.135.73).
Code:
# ping -I eth1 172.17.220.1
PING 172.17.220.1 (172.17.220.1) from 10.201.135.73 eth1: 56(84) bytes of data.
64 bytes from 172.17.220.1: icmp_seq=0 ttl=255 time=5.48 ms
64 bytes from 172.17.220.1: icmp_seq=1 ttl=255 time=0.523 ms
# ping -I bond0 172.17.220.1
PING 172.17.220.1 (172.17.220.1) from 172.17.220.231 bond0: 56(84) bytes of data.
From 172.17.220.231 icmp_seq=1 Destination Host Unreachable
From 172.17.220.231 icmp_seq=2 Destination Host Unreachable
Ping is supposed to work with the default interface bond0. Because the virtual interface bond0 can be pinged by systems in the same subnet, bond0 is working (right?). There must be a routing issue. Here is the interfaces info:
Hello,
I've moved to a new network with multiple AIX box's. Most of them are working fine and dandy.
On one box I need to set up a static route to a gateway.. no problem right?
Whenever I add the route it appears in the routing table as UGc and then begins adding new entries to the... (1 Reply)
I have a string as "Period= 20090531 Client Name= Clayton Lumbar Company Destination= MD"
I want to parse the string and store it in 3 different variables.
$period (should get value 20090531)
$client (should get value "Clayton Lumbar company")
$dest (should get value MD)
How can I do... (3 Replies)
I have an IP routing issue or I am just to stupid to work it out myself.
I have setup am old PC running SUSE Linux 11.3 as a router, the system has 3 Interfaces connecting 3 networks.
Interface 1 = 10.164.2.161/21
Interface 2 = 192.168.1.210/24
Interface 3 = 30.1.0.11/16
The default... (6 Replies)
I have run into a wall troubleshooting a Centos 5 networking issue. Hoping someone can assist.
I've got a box with two vlans trunked over bond0
bond0 Link encap:Ethernet HWaddr 00:22:64:C1:D6:60
inet6 addr: fe80::222:64ff:fec1:d660/64 Scope:Link ... (0 Replies)
hello everyone!:)
I have an exercise which I think is difficult for beginner like me. Here is the exercise
Create a shell script, which takes a directory as command line argument.
Script displays ten first lines from every text file in that directory. After
displaying the lines from the... (1 Reply)
hi guys
suse 11 SP1 x64
I have a server (4 NIC ports 192.168.100.100-103) that connects point to point to a storage device (same thing 4 ports 192.168.110.100-113) but this server connects to normal LAN 10.6.100.x - gateway 10.6.100.1
the issue is when testing connectivity to the storage... (7 Replies)
we are not able to ping client server (falcon-ebr.sbms.bsc.com) from netbackup master server (135.179.96.122 tsprd-ebr.edc.single.net)
However from client server we are able to ping the master Server.
Please assist on this (1 Reply)
Hi,
Please help me on issue described below,
I have 4 machine setup, M1 -> M2 -> M3 | M4. And A laptop that can be reachable through both M3 and M4.
M2 has 2 NIC conected to M3 and M4. Now I want to divide the flow coming from M1 for laptop.
At M2, I have done following,... (1 Reply)
Discussion started by: rahulbhansali24
1 Replies
LEARN ABOUT NETBSD
mixerctl
MIXERCTL(1) BSD General Commands Manual MIXERCTL(1)NAME
mixerctl -- control audio mixing
SYNOPSIS
mixerctl [-d file] [-n] [-v] -a
mixerctl [-d file] [-n] [-v] name ...
mixerctl [-d file] [-n] -w name=value ...
mixerctl [-d file] [-n] -w name++ ...
mixerctl [-d file] [-n] -w name-- ...
mixerctl [-d file] [-n] -w name+=value ...
mixerctl [-d file] [-n] -w name-=value ...
DESCRIPTION
The mixerctl command displays or sets various audio system mixing variables. If a list of variables is present on the command line, then
mixerctl prints the current value of those variables for the specified device. If the -a flag is specified, all variables for the device are
printed. If the -w flag is specified, mixerctl attempts to set the specified variables to the given values.
The -d flag can be used to give an alternative mixer device. The default is /dev/mixer.
The -n flag suppresses printing of the variable name.
The -v flag shows the possible values of enumeration and set valued variables. Enumerated values are shown in brackets (``[]'') and set val-
ues are shown in curly braces (``{}'').
The exact set of controls that can be manipulated depends on the mixer. The general format (in both getting and setting a value) is
class.name = value
class can have values like inputs or outputs, indicating that the control affects the input or output of the mixer, respectively. name indi-
cates what part of the mixer the control affects. Continuous mixer values, e.g., volume, have numeric values in the range 0-255. If value
can be set for each channel independently, the values are printed separated by commas. Discrete mixer values, e.g., the recording source,
have symbolic names. Depending on the mixer it may either be an enumeration or a set.
The suffixes ++ and -- can be used to step through the values of a mixer control. For numeric controls, these operators increase or
decrease, respectively, the value by an amount (the delta) suitable to make the control assume the next possible value. For binary controls,
these operators toggle between on and off.
The operators += and -= change the value of a mixer control by the indicated number of steps.
ENVIRONMENT
MIXERDEVICE the mixer device to use.
FILES
/dev/mixer mixer audio device
/etc/mixerctl.conf mixer configuration file
EXAMPLES
The command
mixerctl -a -v
can produce
inputs.mic=0,0 volume
inputs.mic.mute=off [ off on ]
inputs.cd=220,220 volume
inputs.cd.mute=off [ off on ]
inputs.dac=220,220 volume
inputs.dac.mute=off [ off on ]
record.record=220,220 volume
record.record.source=mic [ mic cd dac ]
monitor.monitor=0 volume
COMPATIBILITY
The old -f flag is still supported. This support will be removed eventually.
SEE ALSO audioctl(1), audio(4), mixerctl.conf(5), sysctl(8)HISTORY
The mixerctl command first appeared in NetBSD 1.3.
BSD August 15, 2008 BSD