Our p740 systems are booting up from SAN. We would like to configure the local disk(which is not part of rootvg) as a primary dump device. I have assigned the same too. But in the errpt throwing the below error. Please help me on this.
Code:
---------------------------------------------------------------------------
LABEL: DMPCHK_NODUMPACCESS
IDENTIFIER: 6D87B1C0
Date/Time: Sun Oct 21 15:00:13 GMT+03:00 2012
Sequence Number: 68138
Machine Id: 00F69DD24C00
Node Id: hostname
Class: O
Type: UNKN
WPAR: Global
Resource Name: dumpcheck
Description
The dump device can not be accessed
Probable Causes
The access to the dump device is currently unavailable
Recommended Actions
Check the dump device access and configuration.
Detail Data
Dump Device
hdisk0
root@[/home/root]# sysdumpdev -l
primary /dev/hdisk0
secondary /dev/sysdumpnull
copy directory /var/adm/ras
forced copy flag TRUE
always allow dump TRUE
dump compression ON
type of dump traditional
root@[/home/root]# sysdumpdev -e
0453-041 Estimated dump size in bytes: 873254092
root@[/home/root]# bootinfo -s hdisk0
25600
root@[/home/root]#lsdev -Cc disk | grep hdisk0
hdisk0 Available Virtual SCSI Disk Drive
root@[/home/root]# lspv | grep hdisk0
hdisk0 00f69dd24640c289 dumpvg active
root@[/home/root]#lsvg -l rootvg | grep dump
livedump jfs2 4 4 1 open/syncd /var/adm/ras/livedump
pridump sysdump 10 10 1 closed/syncd N/A
Hi Guys!!
Iam new to this thread.
I have a very urgent requirement of finding the local disk space. Iam running a php script on linux machine and need to find the local disk space on the remote machines.
I tried using df -h, which works if I specify the drive name on the remote machine.... (4 Replies)
Hi,
I have a server which is running out of space on the rootvg. When trying to find some spare space I discovered there are 2 sysdump logical volumes, each of 5GB, yet if I get an estimate of the dump size it's only 0.5 GB.
$ lsvg -l rootvg|grep sysdump
hd71 sysdump 20 ... (1 Reply)
I'm researching on how to unmirror a set of mirrored drives as this should enable me to do a failsafe patch install. My current install has 2 disk with all LVs mirrored except the sysdump LV.
This is the bit that confuses me as some seem to advise removing the sysdump from both drives (Patch... (2 Replies)
We ordered a DVD for solaris 10 upgrade . However I realized that we have cd rom only and DVD is unreadable . Can i use this DVD , to upgrade the release from local disks. If yes , is there any specific procedure. (5 Replies)
Hi,
I am trying to move a local directory from a local disk to a nfs disk that has been shared on another file server. I am using this tar command:
tar cf - . | (cd /export/nfsdisk && tar xpf - )
It copies the data okay but the big problem is that is resets the owner:group to 'nobody'. The... (2 Replies)
Hi all,
I want to put a local disk on a Sun Cluster node but scconf command explodes :eek:
My system:
* two node cluster on two VMWare virtual machines
* Solaris 10 SunOS 5.10 Generic_141415-05 i86pc i386 i86pc
* Sun Cluster 3.2 u2
* Veritas Volume manager
The situation... (2 Replies)
Hi,
I recently added a disk on a solaris 9 and I wanted to make it accessible for another machine, using the same name
here is what i did :
On the machine holding the internal disk
in vfstab i added the line
/dev/dsk/c1t1d0s4 /dev/rdsk/c1t1d0s4 /SHARED2 ufs 2 yes ... (2 Replies)
I have Solaris-10 server. During troubleshooting of some storage issue, I removed disk entries from /dev/dsk and /dev/rdsk
rm /dev/vx/dmp/*
rm /dev/vx/rdmp/*
rm /dev/dsk/*
rm /dev/rdsk/
And rebooted the box. That recreated device tree for SAN disks, but I do not see c1t0d0s0 and c1t1d0s0... (7 Replies)
I need to add a VMware virtual disk to the 99-oracle-asmdevices.rules file but the OS is not assigning a WWID to the disk. It has been fdisk'd and a single partition created.
What TAG inside the file needs to be added? the Program scsi-id does not work for some reason. latest patches... (0 Replies)
I am in the market looking to purchase a new E950 server and I am trying to decide between using local SSD drives or SSD based SAN. The application that will be running on this server is read-intensive so I am looking for the most optimal configuration to support this application. There are no... (2 Replies)
Discussion started by: ikx
2 Replies
LEARN ABOUT CENTOS
pcilib
pcilib(7) The PCI Utilities pcilib(7)NAME
pcilib - a library for accessing PCI devices
DESCRIPTION
The PCI library (also known as pcilib and libpci) is a portable library for accessing PCI devices and their configuration space.
ACCESS METHODS
The library supports a variety of methods to access the configuration space on different operating systems. By default, the first matching
method in this list is used, but you can specify override the decision (see the -A switch of lspci).
linux-sysfs
The /sys filesystem on Linux 2.6 and newer. The standard header of the config space is available to all users, the rest only to
root. Supports extended configuration space, PCI domains, VPD (from Linux 2.6.26), physical slots (also since Linux 2.6.26) and
information on attached kernel drivers.
linux-proc
The /proc/bus/pci interface supported by Linux 2.1 and newer. The standard header of the config space is available to all users, the
rest only to root.
intel-conf1
Direct hardware access via Intel configuration mechanism 1. Available on i386 and compatibles on Linux, Solaris/x86, GNU Hurd, Win-
dows, BeOS and Haiku. Requires root privileges.
intel-conf2
Direct hardware access via Intel configuration mechanism 2. Available on i386 and compatibles on Linux, Solaris/x86, GNU Hurd, Win-
dows, BeOS and Haiku. Requires root privileges. Warning: This method is able to address only the first 16 devices on any bus and it
seems to be very unreliable in many cases.
fbsd-device
The /dev/pci device on FreeBSD. Requires root privileges.
aix-device
Access method used on AIX. Requires root privileges.
nbsd-libpci
The /dev/pci0 device on NetBSD accessed using the local libpci library.
obsd-device
The /dev/pci device on OpenBSD. Requires root privileges.
dump Read the contents of configuration registers from a file specified in the dump.name parameter. The format corresponds to the output
of lspci -x.
darwin Access method used on Mac OS X / Darwin. Must be run as root and the system must have been booted with debug=0x144.
PARAMETERS
The library is controlled by several parameters. They should have sensible default values, but in case you want to do something unusual (or
even something weird), you can override them (see the -O switch of lspci).
Parameters of specific access methods
dump.name
Name of the bus dump file to read from.
fbsd.path
Path to the FreeBSD PCI device.
nbsd.path
Path to the NetBSD PCI device.
obsd.path
Path to the OpenBSD PCI device.
proc.path
Path to the procfs bus tree.
sysfs.path
Path to the sysfs device tree.
Parameters for resolving of ID's via DNS
net.domain
DNS domain containing the ID database.
net.cache_name
Name of the file used for caching of resolved ID's.
Parameters for resolving of ID's via UDEV's HWDB
hwdb.disable
Disable use of HWDB if set to a non-zero value.
SEE ALSO lspci(8), setpci(8), update-pciids(8)AUTHOR
The PCI Utilities are maintained by Martin Mares <mj@ucw.cz>.
pciutils-3.5.2 03 October 2016 pcilib(7)
10-22-2012
