Sponsored Content
Top Forums Shell Programming and Scripting Filtering first file columns based on second file column Post 302715741 by ks_reddy on Monday 15th of October 2012 10:15:11 AM
Old 10-15-2012
Filtering first file columns based on second file column

Hi friends,

I have one file like below. (.csv type)
Code:
SNo,data1,data2
1,1,2
2,2,3
3,3,2

and another file like below.
Code:
Exclude
data1

where Exclude should be treated as column name in file2.
I want the output shown below.
Code:
SNo,data2
1,2
2,3
3,2

Where my data1 column got removed from my first file as it is mentioned in next file.
In reality i have 1000's of columns in my file 1 and want to remove some of them by keep updating in second file.
I got a one liner R code, but to load the first file and writing the result into another file is taking lot of time as well as more memory commit.

Regards
Sidda
 

10 More Discussions You Might Find Interesting

1. UNIX for Dummies Questions & Answers

Filtering records of a file based on a value of a column

Hi all, I would like to extract records of a file based on a condition. The file contains 47 fields, and I would like to extract only those records that match a certain value in one of the columns, e.g. COL1 COL2 COL3 ............... COL47 1 XX 45 ... (4 Replies)
Discussion started by: risk_sly
4 Replies

2. Shell Programming and Scripting

filtering one file based on results from other

Can anybody help me with writing a script for the data that I want to use from one file based on the data from another file. I have file1 in this form; (the first field represents a well name and the second field represents the depth of interest) FILE1 -------- DATA_35_0 ... (2 Replies)
Discussion started by: digipak
2 Replies

3. Shell Programming and Scripting

filtering one file based on results from other- AGAIN

I have asked this question here before and got the answer too. Unfortunately I used only one record as an example and the script works fine for one record but not for more than one record. Can anybody help me with writing a script for the data that I want to use from one file based on the... (13 Replies)
Discussion started by: digipak
13 Replies

4. Shell Programming and Scripting

Filtering issues with multiple columns in a single file

Hi, I am new to unix and would greatly appreciate some help. I have a file containing multiple colums containing different sets of data e.g. File 1: John Ireland 27_December_69 Mary England 13_March_55 Mike France 02_June_80 I am currently using the awk... (10 Replies)
Discussion started by: crunchie
10 Replies

5. UNIX for Dummies Questions & Answers

Filtering records from 1 file based on some manipulation doen on second file

Hi, I am looking for an awk script which should help me to meet the following requirement: File1 has records in following format INF: FAILEd RECORD AB1234 INF: FAILEd RECORD PQ1145 INF: FAILEd RECORD AB3215 INF: FAILEd RECORD AB6114 ............................ (2 Replies)
Discussion started by: mintu41
2 Replies

6. Shell Programming and Scripting

Filtering lines for column elements based on corresponding counts in another column

Hi, I have a file like this ACC 2 2 21 aaa AC 443 3 22 aaa GCT 76 1 33 xxx TCG 34 2 33 aaa ACGT 33 1 22 ggg TTC 99 3 44 wee CCA 33 2 33 ggg AAC 1 3 55 ddd TTG 10 1 22 ddd TTGC 98 3 22 ddd GCT 23 1 21 sds GTC 23 4 32 sds ACGT 32 2 33 vvv CGT 11 2 33 eee CCC 87 2 44... (1 Reply)
Discussion started by: polsum
1 Replies

7. Linux

To get all the columns in a CSV file based on unique values of particular column

cat sample.csv ID,Name,no 1,AAA,1 2,BBB,1 3,AAA,1 4,BBB,1 cut -d',' -f2 sample.csv | sort | uniq this gives only the 2nd column values Name AAA BBB How to I get all the columns of CSV along with this? (1 Reply)
Discussion started by: sanvel
1 Replies

8. Shell Programming and Scripting

Replacing 12 columns of one file by second file based on mapping in third file

i have a real data prod file with 80+ fields containing 1k -2k records. i have to extract say 12 columns out of this which are sensitive fields along with one primary key say SEQ_ID (like DOB,account no, name, SEQ_ID, govtid etc) in a lookup file. i have to replace these sensitive fields in... (11 Replies)
Discussion started by: megh12
11 Replies

9. UNIX for Beginners Questions & Answers

Filtering based on column values

Hi there, I am trying to filter a big file with several columns using values on a column with values like (AC=5;AN=10;SF=341,377,517,643,662;VRT=1). I wont to filter the data based on SF= values that are (bigger than 400) ... (25 Replies)
Discussion started by: daashti
25 Replies

10. UNIX for Beginners Questions & Answers

Filtering records of a csv file based on a value of a column

Hi, I tried filtering the records in a csv file using "awk" command listed below. awk -F"~" '$4 ~ /Active/{print }' inputfile > outputfile The output always has all the entries. The same command worked for different users from one of the forum links. content of file I was... (3 Replies)
Discussion started by: sunilmudikonda
3 Replies
Graphics::Primitive::Component(3pm)			User Contributed Perl Documentation		       Graphics::Primitive::Component(3pm)

NAME
Graphics::Primitive::Component - Base graphical unit DESCRIPTION
A Component is an entity with a graphical representation. SYNOPSIS
my $c = Graphics::Primitive::Component->new({ origin => Geometry::Primitive::Point->new({ x => $x, y => $y }), width => 500, height => 350 }); LIFECYCLE
prepare Most components do the majority of their setup in the prepare. The goal of prepare is to establish it's minimum height and width so that it can be properly positioned by a layout manager. $driver->prepare($comp); layout This is not a method of Component, but a phase introduced by the use of Layout::Manager. If the component is a container then each of it's child components (even the containers) will be positioned according to the minimum height and width determined during prepare. Different layout manager implementations have different rules, so consult the documentation for each for details. After this phase has completed the origin, height and width should be set for all components. $lm->do_layout($comp); finalize This final phase provides and opportunity for the component to do any final changes to it's internals before being passed to a driver for drawing. An example might be a component that draws a fleuron at it's extremities. Since the final height and width isn't known until this phase, it was impossible for it to position these internal components until now. It may even defer creation of this components until now. It is not ok to defer all action to the finalize phase. If you do not establish a minimum hieght and width during prepare then the layout manager may not provide you with enough space to draw. $driver->finalize($comp); draw Handled by Graphics::Primitive::Driver. $driver->draw($comp); METHODS
Constructor new Creates a new Component. Instance Methods background_color Set this component's background color. border Set this component's border, which should be an instance of Border. callback Optional callback that is fired at the beginning of the "finalize" phase. This allows you to add some sort of custom code that can modify the component just before it is rendered. The only argument is the component itself. Note that changing the position or the dimensions of the component will not re-layout the scene. You may have weird results of you manipulate the component's dimensions here. class Set/Get this component's class, which is an abitrary string. Graphics::Primitive has no internal use for this attribute but provides it for outside use. color Set this component's foreground color. fire_callback Method to execute this component's "callback". get_tree Get a tree for this component. Since components are -- by definiton -- leaf nodes, this tree will only have the one member at it's root. has_callback Predicate that tells if this component has a "callback". height Set this component's height. inside_bounding_box Returns a Rectangle that defines the edges of the 'inside' box for this component. This box is relative to the origin of the component. inside_height Get the height available in this container after taking away space for padding, margin and borders. inside_width Get the width available in this container after taking away space for padding, margin and borders. margins Set this component's margins, which should be an instance of Insets. Margins are the space outside the component's bounding box, as in CSS. The margins should be outside the border. maximum_height Set/Get this component's maximum height. Used to inform a layout manager. maximum_width Set/Get this component's maximum width. Used to inform a layout manager. minimum_height Set/Get this component's minimum height. Used to inform a layout manager. minimum_inside_height Get the minimum height available in this container after taking away space for padding, margin and borders. minimum_inside_width Get the minimum width available in this container after taking away space for padding, margin and borders. minimum_width Set/Get this component's minimum width. Used to inform a layout manager. name Set this component's name. This is not required, but may inform consumers of a component. Pay attention to that library's documentation. origin Set/Get the origin point for this component. outside_height Get the height consumed by padding, margin and borders. outside_width Get the width consumed by padding, margin and borders. finalize Method provided to give component one last opportunity to put it's contents into the provided space. Called after prepare. padding Set this component's padding, which should be an instance of Insets. Padding is the space inside the component's bounding box, as in CSS. This padding should be between the border and the component's content. page If true then this component represents stand-alone page. This informs the driver that this component (and any children) are to be renderered on a single surface. This only really makes sense in formats that have pages such as PDF of PostScript. prepare Method to prepare this component for drawing. This is an empty sub and is meant to be overridden by a specific implementation. preferred_height Set/Get this component's preferred height. Used to inform a layout manager. preferred_width Set/Get this component's preferred width. Used to inform a layout manager. to_string Get a string representation of this component in the form of: $name $x,$y ($widthx$height) visible Set/Get this component's visible flag. width Set/Get this component's width. AUTHOR
Cory Watson, "<gphat@cpan.org>" BUGS
Please report any bugs or feature requests to "bug-geometry-primitive at rt.cpan.org", or through the web interface at http://rt.cpan.org/NoAuth/ReportBug.html?Queue=Geometry-Primitive <http://rt.cpan.org/NoAuth/ReportBug.html?Queue=Geometry-Primitive>. I will be notified, and then you'll automatically be notified of progress on your bug as I make changes. COPYRIGHT &; LICENSE Copyright 2008-2009 by Cory G Watson. This program is free software; you can redistribute it and/or modify it under the same terms as Perl itself. perl v5.12.3 2011-06-02 Graphics::Primitive::Component(3pm)
All times are GMT -4. The time now is 03:48 PM.
Unix & Linux Forums Content Copyright 1993-2022. All Rights Reserved.
Privacy Policy