Hello,
which network interface i must sellect during the solaris9 installation le0 or hme0 ?
this system is part of the network, it is a standalone system
and is not on any domain.
thanks for your help,
em (1 Reply)
Would anyone know why a V440 Solaris 9 machine's interfaces (ce0 and ce1)
will not failover?
Both interfaces are on the same subnet, but different IPs. I can pull the plug on once interface (ce0) and ce1 will be accessible. I can reverse it and pull ce1, and ce0 will NOT be accessible. ... (5 Replies)
I got second IOU in my M5000 but not able bring internal network interfcae .. ike i don't get link on those 2 interfaces .. and the same network cable plugged in PCI network card it works like a charm Is there any special way to enable the internal IOU interfaces or i have bad nics ? (8 Replies)
Hello,
can someone please suggest if is possible to use different net interfaces
for non global zones ?
for example ,
bash-3.00# uname -srv
SunOS 5.10 Generic_137137-09
bash-3.00# ifconfig -a
lo0: flags=2001000849<UP,LOOPBACK,RUNNING,MULTICAST,IPv4,VIRTUAL> mtu 8232 index 1
... (6 Replies)
i need a one liner command that writes in /var/log/net.log the date when i connect to the network and when i disconect ..i know that i need to write somethin in /etc/network/interfaces but idk what ! please help (1 Reply)
Hi friends,
I am abit confused regarding these interfaces, hope you could clearify everything, and differentiate between them, with examples?
1. Graphical User Interface(GUI)
2. Text User Interface(TUI)
3. Character User Interface(CUI)
4. Commandline Interface(CLI)
5. Text-based User... (1 Reply)
Hi Al,
In course of understanding networking in Solaris, I have these doubts on Interfaces. Please clarify me. I have done fair research in this site and others but could not be clarified.
1. In the "ifconfig -a" command, I see many interfaces and their configurations. But I see many... (1 Reply)
So after getting a Nagios plugin up and running that checks certain things including network interfaces, I get an error off the one box I built (as opposed to all of the others that were built by a former employee). The error complains of the "NIC logical group" failing.
All the boxes are HP... (7 Replies)
Discussion started by: xdawg
7 Replies
LEARN ABOUT REDHAT
ppmtosixel
ppmtosixel(1) General Commands Manual ppmtosixel(1)NAME
ppmtosixel - convert a portable pixmap into DEC sixel format
SYNOPSIS
ppmtosixel [-raw] [-margin] [ppmfile]
DESCRIPTION
Reads a portable pixmap as input. Produces sixel commands (SIX) as output. The output is formatted for color printing, e.g. for a DEC
LJ250 color inkjet printer.
If RGB values from the PPM file do not have maxval=100, the RGB values are rescaled. A printer control header and a color assignment table
begin the SIX file. Image data is written in a compressed format by default. A printer control footer ends the image file.
OPTIONS -raw If specified, each pixel will be explicitly described in the image file. If -raw is not specified, output will default to com-
pressed format in which identical adjacent pixels are replaced by "repeat pixel" commands. A raw file is often an order of magni-
tude larger than a compressed file and prints much slower.
-margin
If -margin is not specified, the image will be start at the left margin (of the window, paper, or whatever). If -margin is speci-
fied, a 1.5 inch left margin will offset the image.
PRINTING
Generally, sixel files must reach the printer unfiltered. Use the lpr -x option or cat filename > /dev/tty0?.
BUGS
Upon rescaling, truncation of the least significant bits of RGB values may result in poor color conversion. If the original PPM maxval was
greater than 100, rescaling also reduces the image depth. While the actual RGB values from the ppm file are more or less retained, the
color palette of the LJ250 may not match the colors on your screen. This seems to be a printer limitation.
SEE ALSO ppm(5)AUTHOR
Copyright (C) 1991 by Rick Vinci.
26 April 1991 ppmtosixel(1)