13 disk raidz2 pool lost Post: 302711345

7 More Discussions You Might Find Interesting

1. Infrastructure Monitoring

zfs - migrate from pool to pool

Here are the details. cnjr-opennms>root$ zfs list NAME USED AVAIL REFER MOUNTPOINT openpool 20.6G 46.3G 35.5K /openpool openpool/ROOT 15.4G 46.3G 18K legacy openpool/ROOT/rds 15.4G 46.3G 15.3G / openpool/ROOT/rds/var 102M ...

2. Ubuntu

Disk Space lost mysteriously upon breaking a process.

Hi All, Today when I was working on a script to generate custom wordlist. So I ran a script and the output was directed to /tmp. The disk space was around 19 gb. While the script was running, I decided to direct the o/p file to my 1TB drive. So I broke the run using Ctrl + C. Now when I...

3. Boot Loaders

Lost MBR on disk

trying to recover a lost partition table, where the signature (0x55AA) has been lost, though attempting to restore using a number of tools (fdisk, testdisk et al) the write fails. also the os is unable to read the disk geometry correctly, after attempting to correct the geometry, the updated...

4. Solaris

zfs raidz2 - insufficient replicas

I lost my system volume in a power outage, but fortunately I had a dual boot and I could boot into an older opensolaris version and my raidz2 7 drive pool was still fine. I even scrubbed it, no errors. However, the older os has some smb problems so I wanted to upgrade to opensolaris11. I...

5. Solaris

Lost Root Password on VXVM Encapsulated Root Disk

Hi All Hope it's okay to post on this sub-forum, couldn't find a better place I've got a 480R running solaris 8 with veritas volume manager managing all filesystems, including an encapsulated root disk (I believe the root disk is encapsulated as one of the root mirror disks has an entry under...

6. Solaris

Need to remove a disk from zfs pool

I accidently added a disk in different zpool instead of pool, where I want. root@prtdrd21:/# zpool status cvfdb2_app_pool pool: cvfdb2_app_pool state: ONLINE scan: none requested config: NAME STATE READ WRITE CKSUM cvfdb2_app_pool ONLINE 0 0 0...

7. Solaris

How to clear a removed single-disk pool from being listed by zpool import?

On an OmniOS server, I removed a single-disk pool I was using for testing. Now, when I run zpool import it will show it as FAULTED, since that single disk not available anymore. # zpool import pool: fido id: 7452075738474086658 state: FAULTED status: The pool was last...

LEARN ABOUT DEBIAN

dpm-addfs

DPM-ADDFS(1)						    DPM Administrator Commands						      DPM-ADDFS(1)

NAME

       dpm-addfs - add a filesystem to a disk pool

SYNOPSIS

       dpm-addfs --poolname pool_name --server fs_server --fs fs_name [ --st status ] [ --weight weight ] [ --help ]

DESCRIPTION

       dpm-addfs adds a filesystem to a disk pool.

       This command requires ADMIN privilege.

OPTIONS

       pool_name
	      specifies the disk pool name previously defined using dpm-addpool.

       server specifies the host name of the disk server where this filesystem is mounted.

       fs     specifies the mount point of the dedicated filesystem.

       status Initial  status  of this filesystem. It can be set to 0 or DISABLED or RDONLY.  This can be either alphanumeric or the corresponding
	      numeric value.

       weight specifies the weight of the filesystem. This is used during the filesystem selection. The value must be positive.  It is recommended
	      to use a value lower than 10. Default is 1.

EXAMPLE

	    dpm-addfs --poolname Volatile --server sehost --fs /data

EXIT STATUS

       This program returns 0 if the operation was successful or >0 if the operation failed.

SEE ALSO

       dpm(1), dpm_addfs(3), dpm-addpool(1)

LCG
								      $Date$							      DPM-ADDFS(1)