syslogd(1M)															       syslogd(1M)

NAME

       syslogd - log system messages

SYNOPSIS

       /usr/sbin/syslogd [-d] [-f configfile] [-m markinterval] [-p path] [-t | -T]

       syslogd	reads  and forwards system messages to the appropriate log files or users, depending upon the priority of a message and the system
       facility from which it originates. The configuration file /etc/syslog.conf (see syslog.conf(4)) controls where messages are forwarded. sys-
       logd  logs  a  mark (timestamp) message every markinterval minutes (default 20) at priority LOG_INFO to the facility whose name is given as
       mark in the syslog.conf file.

       A system message consists of a single line of text, which may be prefixed with a priority code number enclosed in angle-brackets (<>); pri-
       orities are defined in <sys/syslog.h>.

       syslogd reads from the STREAMS log driver, /dev/log, and from any transport provider specified in /etc/netconfig, /etc/net/transport/hosts,
       and /etc/net/transport/services.

       syslogd reads the configuration file when it starts up, and again whenever it receives a HUP signal (see signal.h(3HEAD), at which time	it
       also closes all files it has open, re-reads its configuration file, and then opens only the log files that are listed in that file. syslogd
       exits when it receives a TERM signal.

       As it starts up, syslogd creates the file /var/run/syslog.pid, if possible, containing its process identifier (PID).

       If message ID generation is enabled (see log(7D)), each message will be preceded by an identifier in the following format: [ID msgid facil-
       ity.priority]. msgid is the message's numeric identifier described in msgid(1M). facility and priority are described in syslog.conf(4). [ID
       123456 kern.notice] is an example of an identifier when message ID generation is enabled.

       If the message originated in a loadable kernel module or driver, the kernel module's name (for example, ufs) will be displayed  instead	of
       unix. See EXAMPLES for sample output from syslogd with and without message ID generation enabled.

       In  an  effort to reduce visual clutter, message IDs are not displayed when writing to the console; message IDs are only written to the log
       file. See EXAMPLES.

       The /etc/default/syslogd file contains the following default parameter settings. See FILES.

       LOG_FROM_REMOTE

	   Specifies whether remote messages are logged. LOG_FROM_REMOTE=NO is equivalent to the -t command-line option.  The  default	value  for
	   LOG_FROM_REMOTE is YES.

       The following options are supported:

       -d		       Turn  on  debugging. This option should only be used interactively in a root shell once the system is in multi-user
			       mode. It should not be used in the system start-up scripts, as this will cause the system  to  hang  at	the  point
			       where syslogd is started.

       -f configfile	       Specify an alternate configuration file.

       -m markinterval	       Specify an interval, in minutes, between mark messages.

       -p path		       Specify an alternative log device name. The default is /dev/log.

       -T		       Enable the syslogd UDP port to turn on logging of remote messages. This is the default behavior. See .

       -t		       Disable the syslogd UDP port to turn off logging of remote messages. See .

EXAMPLES

       Example 1: syslogd Output Without Message ID Generation Enabled

       The following example shows the output from syslogd when message ID generation is not enabled:

       Sep 29 21:41:18 cathy unix: alloc /: file system full

       Example 2: syslogd Output with ID generation Enabled

       The  following example shows the output from syslogd when message ID generation is enabled. The message ID is displayed when writing to log
       file/var/adm/messages.

       Sep 29 21:41:18 cathy ufs: [ID 845546 kern.notice]
					   alloc /: file system full

       Example 3: syslogd Output with ID Generation Enabled

       The following example shows the output from syslogd when message ID generation is enabled when writing to the console. Even though  message
       ID is enabled, the message ID is not displayed at the console.

       Sep 29 21:41:18 cathy ufs: alloc /: file system full

       /etc/syslog.conf 	       Configuration file

       /var/run/syslog.pid	       Process ID

       /etc/default/syslogd	       Contains default settings. You can override some of the settings by command-line options.

       /dev/log 		       STREAMS log driver

       /etc/netconfig		       Transport providers available on the system

       /etc/net/transport/hosts        Network hosts for each transport

       /etc/net/transport/services     Network services for each transport

       See attributes(5) for descriptions of the following attributes:

       +-----------------------------+-----------------------------+
       |      ATTRIBUTE TYPE	     |	    ATTRIBUTE VALUE	   |
       +-----------------------------+-----------------------------+
       |Availability		     |SUNWcsu			   |
       +-----------------------------+-----------------------------+

       logger(1), svcs(1), msgid(1M),svcadm(1M), syslog(3C), syslog.conf(4), attributes(5), signal.h(3HEAD), smf(5), log(7D)

NOTES

       The  mark  message is a system time stamp, and so it is only defined for the system on which syslogd is running. It can not be forwarded to
       other systems.

       When syslogd receives a HUP signal, it attempts to complete outputting pending messages, and close all log files to which it  is  currently
       logging	messages.  If,	for  some reason, one (or more) of these files does not close within a generous grace period, syslogd discards the
       pending messages, forcibly closes these files, and starts reconfiguration. If this shutdown procedure is disturbed by an  unexpected  error
       and  syslogd  cannot complete reconfiguration, syslogd sends a mail message to the superuser on the current system stating that it has shut
       down, and exits.

       Care should be taken to ensure that each window displaying messages forwarded by syslogd (especially console windows) is run in the  system
       default	locale (which is syslogd's locale). If this advice is not followed, it is possible for a syslog message to alter the terminal set-
       tings for that window, possibly even allowing remote execution of arbitrary commands from that window.

       The syslogd service is managed by the service management facility, smf(5), under the service identifier:

	svc:/system/system-log:default

       Administrative actions on this service, such as enabling, disabling, or requesting restart, can be performed  using  svcadm(1M).  The  ser-
       vice's status can be queried using the svcs(1) command.

								    31 May 2005 						       syslogd(1M)