USB RAID 5 Problem on Joli OS 1.2 (Ubuntu) using mdadm Post: 302706203

9 More Discussions You Might Find Interesting

1. Filesystems, Disks and Memory

RAID Problem on SUSE 11.0

I setup a RAID 5 with 5 drives, one failed, hardware failure so I physically removed it from the raid after powering the machine off then powered it back on and my raid was still good but no 5th drive. I built a 5th drive from scratch and added it in the raid thinking the raid would go into...

2. Ubuntu

Ubuntu on USB stick?

Hey Guys I have an Ubuntu CD and I was thinking of creating like a bootable hard drive with various OS so that I can just boot OSs with t drive and not require the CDs. I was just wondering is there a way I can do this, like have Ubuntu boot from a USB stick? If yes how is that possible(even if I...

3. Solaris

Raid problem on T2000

Hi all, First post so be gentile :) It's my first time installing Solaris on T2000 server. I have 2 72GB HD's on it. After configuring HW raid and running raidctl command I get this output: bash-3.00# raidctl -l c0t0d0 Volume Size Stripe Status Cache RAID ...

4. Hardware

Problem with External Raid Controller.

Hi, We have a Sunfire 4150 with On-Board Internal Raid Controller connected to 4 X 146 GB SAS disks. This also has an External Raid Controller (Storagetek Eight-Port, External HBA Model SG-XPCIESAS-R-EXT-Z) connected to a JBOD array ( Storagetek XTA2530 ) which has 5 X 300 GB Hard disk. ...

5. Ubuntu

How to implement TIOCOUTQ for USB modem on Linux Ubuntu

Hi, I need to override ioctl operation for a few USB drivers (sierra, option, cdc-acm) on Linux Ubuntu 2.6.34sb2 to support TIOCOUTQ command. Unfortunately, none of the drivers I mentioned above support TIOCOUTQ because it seems unclear to know amount of data inside a modem. Does Linux...

6. Ubuntu

[SOLVED] Dual boot Windows 7 and Ubuntu on USB

I am trying to dual boot on an external USB 500GB drive using my laptop.I have Windows 7 installed and booting on 1st partition 230GB now as active primary, 2nd partition is 100GB as primary, and 3rd partition is 135GB as primary. I was intending on installing Ubuntu onto the 2nd partition. I read...

7. Ubuntu

Copy existing Ubuntu to boot from USB

Hello all, I am looking for a way to copy the existing Ubuntu server 12.04 to a USB (with all the packages and such) and make it boot from the USB. I have seen other threads about copying the CD image to the USB, which is not exactly I am looking for. Before I start diving into anything I...

8. Ubuntu

Installing UBUNTU on USB stick

I'd like to install the OS on my stick. I would like to be able to save my works there and install apps or customize the OS. What can I do Ps. At home I use an iMac, but in the school where I work there are only PC... Ty

9. UNIX for Advanced & Expert Users

How to fix mistake on raid: mdadm create instead of assemble?

Hi guys, I'm new to RAID although I've had a server running raid5 for a while. It was delivered preinstalled like this and I never really wondered how to monitor and maintain it. This quick introduction just to let you understand why I'm such an idiot asking such a silly question. Now what...

LEARN ABOUT PHP

pspell_config_mode

PSPELL_CONFIG_MODE(3)							 1						     PSPELL_CONFIG_MODE(3)

pspell_config_mode - Change the mode number of suggestions returned

SYNOPSIS

       bool pspell_config_mode (int  $dictionary_link, int  $mode)

DESCRIPTION

       pspell_config_mode(3) should be used on a config before calling pspell_new_config(3). This function determines how many suggestions will be
       returned by pspell_suggest(3).

PARAMETERS

	      o $dictionary_link
		-

	      o $mode
		- The mode parameter is the mode in which spellchecker will work. There are several modes available:

		     o PSPELL_FAST - Fast mode (least number of suggestions)

		     o PSPELL_NORMAL - Normal mode (more suggestions)

		     o PSPELL_BAD_SPELLERS - Slow mode (a lot of suggestions)

RETURN VALUES

	Returns TRUE on success or FALSE on failure.

EXAMPLES

       Example #1

	      pspell_config_mode(3) Example

	      <?php
	      $pspell_config = pspell_config_create("en");
	      pspell_config_mode($pspell_config, PSPELL_FAST);
	      $pspell_link = pspell_new_config($pspell_config);
	      pspell_check($pspell_link, "thecat");
	      ?>

PHP Documentation Group 												     PSPELL_CONFIG_MODE(3)