So, I need to change the IP/netmask on 2 sun v240's running solaris 10. I seem to have done it correctly on one, it's holding the ip after a init 6 reboot. The other does not want to keep ip using same commands. I'm guessing I have to change some files I haven't yet, but have no idea how to enter info correctly into the files.
Commands I used were
So, with running these, do I need to update /etc/hostname.bge0 and etc/hosts ? If so, what is the format to input?
Hello
does anybody know how to change the LC_TIME locale on solaris 8 to dd/mm/YYYY
currently it is set to.
#locale -ck LC_TIME
d_fmt="%m/%d/%y"
Thanks (1 Reply)
I am having problems getting this to work, though it seems like it would be simple. I have a host with 2 interfaces, hme0 (192.168.0.132) for the primary interface, and hme1 (192.168.0.16) for backups. I want it to talk to the backup host, which is 192.168.0.21, across the hme1 interface.
Thanks (2 Replies)
Hello.
I am trying to make work HP printer Deskjet 692C. I have
Solaris 9 x86.
I tried to use admintool:
I choosed 'HP-printer' and 'Postscript filter' options.
When I want to print something, instead of the text, the printer prints many pages of some kind of code or whatever...
... (1 Reply)
I am trying to set up a DHCP on Sunblade 100. I have Dlink router that connects me to the net with my other computers. I can't seem to let my DHCP server to give out IP addresses instead of my router. I have been working on this for the last three days. I had an issue with Unknown name but i have... (4 Replies)
Hi,
i'm about to hold a training (Solaris 10) for my colleagues. I've to plan for two days. There is a day for basics and a day (some weeks later) for advanced topics. All of them are regular solaris users (but mostly only installing + patching).
What do you guys think are interesting topics... (22 Replies)
Hi All,
I need some information on 'Alias' setting in SUN SOLARIS.:confused:
Q1. I want to know how can i set my alias here.
Q2. How to view all set 'ALIAS' for me. (say /home/jdash user)
Q3. Can i modify the set 'Alias' for me or for whole environment.
Q4. Is Alias setting can be change... (2 Replies)
Hi,
i have a file which show text on window like,
insert into test values('اسيل للخدمات عبر الأثير');
but when i open this file in solaris it don't show like
insert into test values('اسيل للخدمات عبر الأثير');
i also want to see the line same as it is on windows
kindly help me (3 Replies)
Hi all,
Any idea please how to:
-Change Time format from 24h format to 12h format (AM and PM)
-Turn off DST: Daylight Save Time
on a Solaris10 server
Thanks in advance (1 Reply)
Hi All
Does anybody have configured successfully nagios on a solaris 10 system?
I am having issues when running gmake all, I am having the following error:
cp: includes/rss/extlib: is a directory
*** Error code 2
make: Fatal error: Command failed for target `install'
Current working... (0 Replies)
I have Solaris-10 server and want to change default printer setting to Simplex (Instead of duplex, which is set currently). I am not able to see anything in conf file related to this setting.
Please help (2 Replies)
Discussion started by: solaris_1977
2 Replies
LEARN ABOUT DEBIAN
eql_enslave
eql_enslave(8) System Manager's Manual eql_enslave(8)NAME
eql_enslave - enslave a network interface with a master interface
SYNOPSIS
eql_enslave <master-name> <slave-name> <estimated-bps>
DESCRIPTION
eql_enslave enslaves a PPP or SLIP network interface to another, named master interface or eql device.
The MTU must match the MTU of your serial line device, otherwise, eql_enslave just fails when it is called. You have also to turn off Van-
Jacobson compression on your slave devices.
Once the eql device is configured, it will stay up and running until you shut it down manually or reboot. If you have the eql support com-
piled as a module then all you have to do is to remove the module after downing the interface.
Note that you have to connect to a terminal server capable of doing load balancing or another Linux box to use EQL.
EXAMPLES
# Client Side EQL Driver Initialization
ifconfig eql 192.168.1.2 netmask 255.255.255.0 mtu 1500
eql_enslave eql ppp0 33600
eql_enslave eql ppp1 14400
eql_enslave eql ppp2 28800
SEE ALSO ifconfig(8)AUTHOR
Written by Simon "Guru Aleph-Null" Janes, simon@ncm.com.
Manual page added by Roberto Lumbreras <rover@debian.org>.
eql_enslave(8)