Enabling port 4902 Post: 302703713

9 More Discussions You Might Find Interesting

1. UNIX for Dummies Questions & Answers

enabling port 8080

hey everyone, i have just finished configuring apache 2.0 with the php and pgsql modules installed on it.. httpd.conf is configured and everything is running right after a lengthy bit of reading and struggling with the system.. the only problem left is how do i enable the port that i would access...

2. Solaris

luxadm -e port shows one port not connected

hi i have a sun machine which has one hba 2ports; out of which one port says it is not connected # luxadm -e port /devices/pci@1d,700000/SUNW,qlc@1/fp@0,0:devctl CONNECTED /devices/pci@1d,700000/SUNW,qlc@1,1/fp@0,0:devctl NOT CONNECTED but both...

3. Solaris

How to enable Serial port on ILOM, when Network Port is enabled in parallel

Hi Everyone, In my environment, I have few T5220. On the iLOM Management Card, I have both Network and Serial port are cabled, I don't have any issues while I try to connect using Network Management port, but when I try to connect the serial port for the same server which is actually connected...

4. IP Networking

telnet for port 5433 is not working while it works for port 22

Hi, I am trying to set up a dev environment and I have Ubuntu server (10.16.1.92) and a CentOS VM (10.16.3.235) on this. On the CentOS I have a program running on port 5433. Now my problem is that I am unable to telnet this port from another Windows server whereas I can telnet port 22 from...

5. IP Networking

Tcp ip port open but no such process (merged: Release A Port)

i want to kill a tcp connection by killing its pid with netstat -an i got the tcp ip connection on port 5914 but when i type ps -a or ps-e there is not such process running on port 5914 is it possible that because i do not log on with proper user account i can not see that process running?

6. Solaris

Cabling and adapters to communicate to service processor serial port from Windows PC with USB port.

Hello, I have an unloaded T5140 machine and want to access the ILOM for the first time and subsequently the network port after that., and then load Solaris 10 the final January 2011 build. The first part is what confuses me -the cabling. I am coming from a Windows machine (w/appropriate...

7. Solaris

How to find port number wwn of particular port on dual port HBA,?

please find the below o/p for your reference bash-3.00# fcinfo hba-port HBA Port WWN: 21000024ff295a34 OS Device Name: /dev/cfg/c2 Manufacturer: QLogic Corp. Model: 375-3356-02 Firmware Version: 05.03.02 FCode/BIOS Version: BIOS: 2.02; fcode: 2.01;...

8. Shell Programming and Scripting

Help Generate new port base on the last port but not in used by other application

Hi Expert, Anybody can figure it out on how to generate new port base on my last port let say my last port var1=124 and increment for new port 125,126 but this new two ports need to look at first if this port is not in used by any service, if the port is in used add 1 to new port and if in used...

9. UNIX for Beginners Questions & Answers

Bash script, find the next closed (not in use) port from some port range.

hi, i would like to create a bash script that check which port in my Linux server are closed (not in use) from a specific range, port range (3000-3010). the print output need to be only 1 port, and it will be nice if the output will be saved as a variable or in same file. my code is: ...

LEARN ABOUT DEBIAN

linux::distribution

Linux::Distribution(3pm)				User Contributed Perl Documentation				  Linux::Distribution(3pm)

NAME

       Linux::Distribution - Perl extension to detect on which Linux distribution we are running.

SYNOPSIS

	 use Linux::Distribution qw(distribution_name distribution_version);

	 if(my $distro = distribution_name) {
	       my $version = distribution_version();
	       print "you are running $distro, version $version
";
	 } else {
	       print "distribution unknown
";
	 }

	 Or else do it OO:

	 use Linux::Distribution qw(distribution_name distribution_version);

	 my $linux = Linux::Distribution->new;
	 if(my $distro = $linux->distribution_name()) {
	       my $version = $linux->distribution_version();
	       print "you are running $distro, version $version
";
	 } else {
	       print "distribution unknown
";
	 }

DESCRIPTION

       This is a simple module that tries to guess on what linux distribution we are running by looking for release's files in /etc.  It now looks
       for 'lsb-release' first as that should be the most correct and adds ubuntu support.  Secondly, it will look for the distro specific files.

       It currently recognizes slackware, debian, suse, fedora, redhat, turbolinux, yellowdog, knoppix, mandrake, conectiva, immunix, tinysofa,
       va-linux, trustix, adamantix, yoper, arch-linux, libranet, gentoo, ubuntu, scientific, oracle enterprise linux and redflag.

       It has function to get the version for debian, suse, fedora, redhat, gentoo, slackware, scientific, oracle enterprise linux, redflag and
       ubuntu(lsb). People running unsupported distro's are greatly encouraged to submit patches :-)

   EXPORT
       None by default.

TODO

       Add the capability of recognize the version of the distribution for all recognized distributions.

AUTHORS

       Alexandr Ciornii <alexchorny@gmail.com>, <http://chorny.net> Alberto Re, <alberto@accidia.net> Judith Lebzelter, <judith@osdl.org>

COPYRIGHT AND LICENSE

       This library is free software; you can redistribute it and/or modify it under the same terms as Perl itself, either Perl version 5.8.5 or,
       at your option, any later version of Perl 5 you may have available.

perl v5.14.2							    2012-03-18						  Linux::Distribution(3pm)