Sponsored Content
Full Discussion: NPIV custom WWN
Operating Systems AIX NPIV custom WWN Post 302703689 by Zio Bill on Friday 21st of September 2012 03:51:33 AM
Old 09-21-2012
CPU & Memory NPIV custom WWN

Hi All Smilie
i would like to know if i can customize the WWN of the new VFC (NPIV).
Or, if i must move the LPAR on another server with another FCS, i have to change the zoning??

Thanks in advance.

Mario

---------- Post updated 09-21-12 at 02:51 AM ---------- Previous update was 09-20-12 at 06:06 AM ----------

I answer myself so i can share the info with everyone:

i write a post on my website: AIX – Change WWPN of NPIV adapters - La Bottega del Sistemista

The command to change the WWPN is:

chsyscfg -r prof -m 9117-MMA*XXXXXXX -i ‘name=Nomal1,lpar_id=6,”virtual_fc_adapters=”"35/client/3/VIOSERVER-20/13/c0507602150e0016,c0507602150e0017/1″”"‘

Thanks.

Zio
This User Gave Thanks to Zio Bill For This Post:
 

10 More Discussions You Might Find Interesting

1. Solaris

Wwn

hiho peeps, is there a possibility to see the WWNs of your SAN-HBAs, like in ifconfig the MAC-addresse.....??? greetings Pressy (1 Reply)
Discussion started by: pressy
1 Replies

2. AIX

Anyone using NPIV?

Is anyone here using NPIV with AIX? If you are, what type of switch are you connected to? Also, please share some impressions of NPIV over traditional port-to-port LUN assignments. We are looking to move to NPIV and need some convincing argume... I mean information. (2 Replies)
Discussion started by: kah00na
2 Replies

3. AIX

Migrating hdisks from vscsi to NPIV with powerpath

Hi All, I'm preparing to migrate some servers from vscsi to pass-thru NPIV. I am planning to have the SAN team move the exact LUNs from vio1/vio2 to those two VWWN through NPIV. My question is on the partition itself.. right now, let's say I have hdisk0/1/2/3/4 that are part of datavg. They... (2 Replies)
Discussion started by: lapfrank
2 Replies

4. AIX

NPIV with 8Gb PCI Express Dual Port FC Adapter

All I am at a loss with a VIO server running ios 2.2.0.10-FP-24 SP-01. The VIO server is fitted with two 8Gb PCI Express Dual Port FC Adapters. However when I run the lsnports command only two of the adapter ports show as capable: $ lsnports name physloc ... (4 Replies)
Discussion started by: johnf
4 Replies

5. AIX

AIX Sanboot from EMC Symmetrix with NPIV

Hi All.. On to a new implementation with AIX 7.1 san boot from EMC disks (Using NPIV). Anyone played with this recently? Wondering if we need PowerPath on the AIX clients or has native MPIO matured to replace it. Thoughts? Thanks Mr B (6 Replies)
Discussion started by: balaji_prk
6 Replies

6. AIX

Vscsi and npiv on same adapter

Hi, I want to change from vscsi to npiv. Is it possible to use both on the same adapter, so we can change the systems one by one, or must we place a second FC adapter in the VIO servers? Thanks, Ronald (2 Replies)
Discussion started by: ronaldm60
2 Replies

7. AIX

NPIV mapping problem

Hello all I hope someone can help me with this. I have a single LPAR which is supplied a rootvg and datavg disk set from a dual VIO server configuration. I see dual path disks for all the datavg disks but only see one path for the rootvg disks. The client LPAR has the following: fcs0 ... (3 Replies)
Discussion started by: johnf
3 Replies

8. AIX

VIOS FC Mapping/NPIV questions

Please forgive me here as I don't fully understand what I am talking about here so if I use the wrong terminology please overlook me. We have multiple AIX LPARs on the managed system with two VIO Servers. A Co-Worker and I are trying to set up a new LPAR client (The guy that knows this is out)... (14 Replies)
Discussion started by: juredd1
14 Replies

9. AIX

AIX san boot from EMC2 & NPIV

Hi all , we're implementing a new NPIV infrastructure with AIX san boot on EMC2 VMAX 5876 , for economic reason , they don't wont to install Powerpath multipath sw , but only ODM drivers from EMC2 , this behavior is supported and can work?! in the past we implemented NPIV on DS8000 family... (2 Replies)
Discussion started by: BabylonRocker76
2 Replies

10. Red Hat

Need WWN

How do I identify the WWN of associated SAN through a logical volume that is mounted on a RHEL 6 system (2 Replies)
Discussion started by: nixhead
2 Replies
HBA_GetBindingCapability(3HBAAPI)	      Common Fibre Channel HBA Information Library Functions		 HBA_GetBindingCapability(3HBAAPI)

NAME
HBA_GetBindingCapability, HBA_GetBindingSupport, HBA_SetBindingSupport - return and sets binding capabilities on an HBA port SYNOPSIS
cc [ flag... ] file... -lHBAAPI [ library... ] #include <hbaapi.h> HBA_HANDLE HBA_GetBindingCapability(HBA_HANDLE handle, HBA_WWN hbaPortWWN, HBA_BIND_CAPABILITY *pFlags); HBA_STATUS HBA_GetBindingSupport(HBA_HANDLE handle, HBA_WWN hbaPortWWN, HBA_BIND_CAPABILITY *pFlags); void HBA_SetBindingSupport(HBA_HANDLE handle, HBA_WWN hbaPortWWN, HBA_BIND_CAPABILITY Flags); PARAMETERS
handle an open handle returned from HBA_OpenAdapter(3HBAAPI) hbaPortWWN the Port WWN of the local HBA through which the binding capabilities implemented by the HBA is returned pFlags a pointer to an HBA_BIND_CAPABILITY structure that returns the persistent binding capabilites implemented by the HBA Flags an HBA_BIND_CAPABILITY structure containing the persistent binding capabilites to enable for the HBA DESCRIPTION
The HBA_GetBindingCapability() function returns the binding capabilities implemented by the HBA. The HBA_GetBindingSupport() function returns the currently enabled binding capabilities for the HBA. The HBA_SetBindingSupport() function sets the currently enabled binding capabilites for the HBA to a subset of the binding capabilities implemented by the HBA. RETURN VALUES
The HBA_GetBindingCapability() and HBA_GetBindingSupport() functions return the following values: HBA_STATUS_OK Persistent binding capabilites have been returned. HBA_STATUS_ERROR_ILLEGAL_WWN Port WWN hbaPortWWN is not a WWN contained by the HBA referenced by handle. HBA_STATUS_ERROR_NOT_SUPPORTED The HBA handle specified by handle does not support persistent binding. HBA_STATUS_ERROR An error occurred. The value of pFlags remains unchanged and points to the persistent binding capabilites. The HBA_SetBindingSupport() function returns: HBA_STATUS_OK Persistent binding capabilites have been enabled. HBA_STATUS_ERROR_ILLEGAL_WWN Port WWN hbaPortWWN is not a WWN contained by the HBA referenced by handle. HBA_STATUS_ERROR_NOT_SUPPORTED The HBA handle specified by handle does not support persistent binding. HBA_STATUS_ERROR_INCAPABLE The flags argument contains a capability not implemented by the HBA. HBA_STATUS_ERROR An error occurred. ATTRIBUTES
See attributes(5) for descriptions of the following attributes: +-----------------------------+-----------------------------+ | ATTRIBUTE TYPE | ATTRIBUTE VALUE | +-----------------------------+-----------------------------+ |Interface Stability |Standard: FC-MI 1.92 (API | | |version 1) | +-----------------------------+-----------------------------+ | |Standard: FC-HBA Version 4 | | |(API version 2) | +-----------------------------+-----------------------------+ |MT-Level |Safe | +-----------------------------+-----------------------------+ SEE ALSO
libhbaapi(3LIB), attributes(5) T11 FC-MI Specification SunOS 5.10 1 Sep 2003 HBA_GetBindingCapability(3HBAAPI)
All times are GMT -4. The time now is 02:30 PM.
Unix & Linux Forums Content Copyright 1993-2022. All Rights Reserved.
Privacy Policy