09-14-2012
The HPC has a serial port (according to the spec sheet) Use a null modem cable and connect to the serial port of the PC. On a 25 pin serial cable, connect 7 to 7 and cross 2 and 3. On a 9 pin connector, cross 2 and 3 and 5 is straight through. Set the baud rate at 38400 first, if there are errors start lowering it.
PC serial port (RS-232 DE9) pinout and wiring @ pinouts.ru
You would have to find PPP software for the HPC in order to have the pc connect to the internet.
This User Gave Thanks to jgt For This Post:
8 More Discussions You Might Find Interesting
1. UNIX for Dummies Questions & Answers
Hi!
I have a little prob with dialing up to the internet... When I try connect, it says "Sorry, modem is busy"...
Specs:
Laptop
56K modem
Slackware 8.0
Kernel 2.4.5
Cheers;) (4 Replies)
Discussion started by: satan404
4 Replies
2. UNIX for Advanced & Expert Users
Can anybody help me?
I am developing a utility for automating message paging to a BT alphanumeric pager.
I am using a USR 56K Fax-modem connected to /dev/cuab on a Sun Ultra-10. I am using the UNIX 'tip' utility to connect to the modem and I have configured the modem as follows: Baud Rate:... (2 Replies)
Discussion started by: mybeat
2 Replies
3. UNIX for Dummies Questions & Answers
Hello, everyone. I have a little favor to ask. Me and my friends decided sharing an ADSL line with four PCs.
PC no.1: Desktop, two netcard (2000 and 8139), Mandrake 9.0
PC no.2: Acer notebook, PC Card, RTL-8139C/8139C+, MS 98 + Win 2000 Pro
PC no.3: Desktop, net card 8139, WindowME + Win 2000... (1 Reply)
Discussion started by: HOUSCOUS
1 Replies
4. UNIX for Dummies Questions & Answers
Ok. I tried following the directions from some of the other threads, but I've hit a road block.
I have red hat 7.3 and I installed the hcf package:
hcfpcimodem-0.99lnxtbeta03042700k2.4.18_3-1rh.i386.rpm
It installed ok, no errors, but I still can't get linux to find my modem. I've tried... (2 Replies)
Discussion started by: lawadm1
2 Replies
5. UNIX for Dummies Questions & Answers
I am new to Unix. I just got my SUN box from ebay with Solaris supposedly preloaded. The problem is I am unable to connect via Hyperterminal to Solaris, or more to the point, cannot tell if I have a successful connection and that solaris is the one not properly booted up.
I hooked up a null... (3 Replies)
Discussion started by: seethams
3 Replies
6. AIX
I configured the serial modem in my P6-550 AIX 5.3 box
But i dont have telephone line.
when I run the command
# cu -l /dev/tty1
the output is as follows
does it mean that my modem is responding to the command?
can i say my serial port is working and communicating fine?
Connected
... (3 Replies)
Discussion started by: pchangba
3 Replies
7. Solaris
Hi everyone,
I am hoping anyone of you could help me in this weird problem we have in 1 of our Solaris 10 servers. Lately, we have been having some ftp problems in this server. Though it can ping any server within the network, it seems that it can only ftp to a select few. For most servers, the... (4 Replies)
Discussion started by: labdakos
4 Replies
8. Hardware
Hello,
I want to connect a VT520 terminal to p3 linux box.
I have two questions regarding the connection. First,
is it possible to use RJ45 instead of RS232
cable. (with DB9 pin to RJ45 and DB25 to RJ45 converter).
Second point is that; do i need null modem cable or
straight cable... (5 Replies)
Discussion started by: vectrum
5 Replies
iscc(7) Miscellaneous Information Manual iscc(7)
NAME
iscc - serial communications interface
SYNOPSIS
controller iscc0 at isa0
DESCRIPTION
An onboard Zilog 8530 DUART provides AXPvme-based Single Board Computers with console (CON) and auxiliary (AUX) serial communications
ports. Both serial communications ports can operate at baud rates from B50 to B38400, excluding B134 (see tty(7)).
On AXPvme Single Board Computers configured with a graphics head as the system console, the CON serial communications port (/dev/tty01) is
available for use by application programs as an additional communications port.
In the absence of a graphics head, the CON serial communications port (/dev/console) becomes the system console. When used as the serial
system console, the CON serial communications port always operates at 9600 BPS, 8-bits, and no parity.
Regardless of system console, the AUX serial communications port (/dev/tty00) is always available for use by application programs.
RESTRICTIONS
Data communications equipment attached to the CON serial communications port must be set to 9600 BPS, 8-bits, no parity when configured as
the serial system console. The iscc terminal driver enforces this restriction.
No modem control is supported for either the CON or AUX serial communications ports.
FILES
console terminal local terminal local terminal
RELATED INFORMATION
console(7), devio(7), tty(7), MAKEDEV(8) delim off
iscc(7)