Sponsored Content
Operating Systems HP-UX How to clone a 382-workstations hdd? Post 302700901 by vbe on Friday 14th of September 2012 11:38:08 AM
Old 09-14-2012
You can also try to make a recovery archive on a DAT or a external disk using mkrs and boot from that to reinstall, or try to attach the disk as secondary, boot from the old and attempt to make it bootable using mkboot (/etc/boot has to be copied in the proper boot area...) If you know what disk you are trying to replace, try to look in /etc/disktab if you can find it, if not, try to add a new entry VERY CAREFULLY by following the instruction contained in the file...
This User Gave Thanks to vbe For This Post:
 

8 More Discussions You Might Find Interesting

1. IP Networking

networking between two solaris workstations

I am trying to network two solaris workstations(ultra sparc 5) at home. what shoud I use to build the one of workstations as a http and ftp server and to network with the other workstation? (please explain to me in detail.. what kind of software or equipment do I need..) Thanks John (1 Reply)
Discussion started by: jung1975
1 Replies

2. Filesystems, Disks and Memory

about emulation in workstations

i would like about the emulation in workstations. thanks. (2 Replies)
Discussion started by: rmilano
2 Replies

3. UNIX for Advanced & Expert Users

Workstations are not sync

What's the idea of Unsyncron SUN WS's ? one of our client had a problem & my supervisor told me that this causes of unsynchron WS's i mean maybe the setting of one is not compatible with other ..... Any Suggestion would be helpful Rgrds, nikk (1 Reply)
Discussion started by: nikk
1 Replies

4. UNIX for Dummies Questions & Answers

Old HDD copy to new HDD ? im lost...

Over the last few months the HDD spins louder and louder, so I fiqured its time to replace the HDD. Its been running 24/7/365 since 98 :eek:. yes i said since 98 :D I have an IBM system 43P Model 240. 233 MHz. running AIX Version 4. The current HDD is an IBM DGHS COMP IEC -950 FRU PN#... (5 Replies)
Discussion started by: Chevy89rocks
5 Replies

5. Ubuntu

Can't successfully clone an HDD in Ubuntu, please help

Hi guys, I am total newbie to Linux / Ubuntu but trying it to solve the problem I have. I have an OKI printer with bad HDD and trying to clone one from the same HDD from working printer. Board it goes on has a Fiery chipset and system used is Linux based / related - to the best of my knowlege. I... (12 Replies)
Discussion started by: Unlimitedbt
12 Replies

6. Hardware

Please help, I need Sun W2100z/1100z Workstations Supplemental CD 2.5

HI, I am having issue with my SUN W2100z and search all around internet, found this posting on Unix Help Dashboad. Wonder if I am able to get a copy of the Sun W2100z/1100z Workstations Supplemental CD 2.5 from anyone here. Appreciate your help. fungplus (1 Reply)
Discussion started by: fungplus
1 Replies

7. AIX

IBM AIX Internal HDD vs SAN HDD and Oracle

Hi Folks, I am facing an issue with the performance. P4 with 1 processor and 16 GB RAM and SAN HDD = Oracle report takes 25 minutes P5 with 2 processors and 16 GB RAM internall HDD with LPAR = Oracle Report takes 1 hour 15 minutes ( please note I have assigned all the max processors and... (7 Replies)
Discussion started by: filosophizer
7 Replies

8. UNIX for Beginners Questions & Answers

BMW GT1 DIS - SCO 5.0 and Oracle 7 Root HDD Clone - IBM T30

Greeting All Diag tool HDD clone SCO 5 + Oracle 7 DB ( IBM T30 ) I am new to this forum and my knowledge on computers OS is average . I have just acquired a factory diag tool for BMW/RR/MINI from a retired mechanic. Its runs on a IBM T30 laptop with a Unix/Oracle DB system. Sco 5... (8 Replies)
Discussion started by: bmw635
8 Replies
installboot(1M) 														   installboot(1M)

NAME
installboot - install bootblocks in a disk partition SYNOPSIS
installboot bootblk raw-disk-device The boot(1M) program, ufsboot, is loaded from disk by the bootblock program which resides in the boot area of a disk partition. The ufs boot objects are platform-dependent, and reside in the /usr/platform/platform-name/lib/fs/ufs directory. The platform name can be found using the -i option of uname(1). The installboot utility is a SPARC only program. It is not supported on the architecture. users should use installgrub(1M) instead. bootblk The name of the bootblock code. raw-disk-device The name of the disk device onto which the bootblock code is to be installed; it must be a character device which is read- able and writable. Naming conventions for a SCSI or IPI drive are c?t?d?s? and c?d?s? for an IDE drive. Example 1: Installing UFS Boot Block To install a ufs boot block on slice 0 of target 0 on controller 1 of the platform where the command is being run, use: example# installboot /usr/platform/`uname -i`/lib/fs/ufs/bootblk /dev/rdsk/c1t0d0s0 /usr/platform/platform-name/lib/fs/ufs directory where ufs boot objects reside. /platform/platform-name/ufsboot second level program to boot from a disk or CD See attributes(5) for descriptions of the following attributes: +-----------------------------+-----------------------------+ | ATTRIBUTE TYPE | ATTRIBUTE VALUE | +-----------------------------+-----------------------------+ |Availability |SUNWcsu | +-----------------------------+-----------------------------+ od(1), uname(1), boot(1M), init(1M), kadb(1M), kernel(1M), monitor(1M), reboot(1M), rpc.bootparamd(1M), init.d(4), attributes(5) WARNINGS
The installboot utility fails if the bootblk or openfirmware files do not exist or if the raw disk device is not a character device. 11 Apr 2005 installboot(1M)
All times are GMT -4. The time now is 05:22 AM.
Unix & Linux Forums Content Copyright 1993-2022. All Rights Reserved.
Privacy Policy