Sponsored Content
Operating Systems BSD Unable to create zfs zpool in FreeBSD 8.2: no such pool or dataset Post 302700509 by bstring on Thursday 13th of September 2012 01:21:44 PM
Old 09-13-2012
Unable to create zfs zpool in FreeBSD 8.2: no such pool or dataset

I am trying to test simple zfs functionality on a FreeBSD 8.2 VM. When I try to run a 'zpool create' I receive the following error:

Code:
[root@vm-fbsd82-64 /]# zpool create zfspool /dev/da0s1a
cannot create 'zfspool': no such pool or dataset

[root@vm-fbsd82-64 /]# zpool create zfspool /dev/da0
cannot create 'zfspool': no such pool or dataset

I was not sure what to put for the device, so I tried both da0s1a and da0, due to this output:

Code:
[root@vm-fbsd82-64 /]# egrep 'da[0-9]' /var/run/dmesg.boot
da0 at mpt0 bus 0 scbus0 target 0 lun 0
da0: <VMware Virtual disk 1.0> Fixed Direct Access SCSI-2 device
da0: 320.000MB/s transfers (160.000MHz, offset 127, 16bit)
da0: Command Queueing enabled
da0: 204800MB (419430400 512 byte sectors: 255H 63S/T 26108C)
Trying to mount root from ufs:/dev/da0s1a
da0 at mpt0 bus 0 scbus0 target 0 lun 0
da0: <VMware Virtual disk 1.0> Fixed Direct Access SCSI-2 device
da0: 320.000MB/s transfers (160.000MHz, offset 127, 16bit)
da0: Command Queueing enabled
da0: 204800MB (419430400 512 byte sectors: 255H 63S/T 26108C)
Trying to mount root from ufs:/dev/da0s1a
da0 at mpt0 bus 0 scbus0 target 0 lun 0
da0: <VMware Virtual disk 1.0> Fixed Direct Access SCSI-2 device
da0: 320.000MB/s transfers (160.000MHz, offset 127, 16bit)
da0: Command Queueing enabled
da0: 204800MB (419430400 512 byte sectors: 255H 63S/T 26108C)
Trying to mount root from ufs:/dev/da0s1a

Just wondering if I am missing a step or doing something wrong.
edit: I'm starting to wonder if it's because I only have 1 'disk' in this VM, and perhaps the entire disk has been formatted to ufs and so I can't create a zpool on that disk? Do I need to add another disk in VMware?



Also, does anyone know what filesystems are natively supported in FBSD 6.x and 8.x? I believe 6.x supports ufs and 8.x supports ufs and zfs, but I am not positive.

Thank you for any help

Last edited by bstring; 09-13-2012 at 03:27 PM..
 

10 More Discussions You Might Find Interesting

1. Solaris

ZFS Pool Mix-up

Hi all I plan to install Solaris 10U6 on some SPARC server using ZFS as root pool, whereas I would like to keep the current setup done by VxVM: - 2 internal disks: c0t0d0 and c0t1d0 - bootable root-volume (mirrored, both disks) - 1 non-mirrored swap slice - 1 non-mirrored slices for Live... (1 Reply)
Discussion started by: blicki
1 Replies

2. Solaris

unable to import zfs pool

# zpool import pool: emcpool1 id: 5596268873059055768 state: UNAVAIL status: One or more devices are missing from the system. action: The pool cannot be imported. Attach the missing devices and try again. see: Sun Message ID: ZFS-8000-3C config: emcpool1 ... (7 Replies)
Discussion started by: fugitive
7 Replies

3. Infrastructure Monitoring

zfs - migrate from pool to pool

Here are the details. cnjr-opennms>root$ zfs list NAME USED AVAIL REFER MOUNTPOINT openpool 20.6G 46.3G 35.5K /openpool openpool/ROOT 15.4G 46.3G 18K legacy openpool/ROOT/rds 15.4G 46.3G 15.3G / openpool/ROOT/rds/var 102M ... (3 Replies)
Discussion started by: pupp
3 Replies

4. Solaris

zfs pool migration

I need to migrate an existing raidz pool to a new raidz pool with larger disks. I need the mount points and attributes to migrate as well. What is the best procedure to accomplish this. The current pool is 6x36GB disks 202GB capacity and I am migrating to 5x 72GB disks 340GB capacity. (2 Replies)
Discussion started by: jac
2 Replies

5. Solaris

Best way to rename a ZFS Pool?

Other than export/import, is there a cleaner way to rename a pool without unmounting de FS? Something like, say "zpool rename a b"? Thanks. (2 Replies)
Discussion started by: verdepollo
2 Replies

6. Solaris

flarecreate for zfs root dataset and ignore multiple dataset

Hi All, I want to write a script to create flar images on multiple servers. In non zfs filesystem I am using -X option to refer a file to exclude mounts on different servers. but on ZFS -X option is not working. I want multiple mounts to be ignore on ZFS base system during flarecreate. I... (0 Replies)
Discussion started by: uxravi
0 Replies

7. Solaris

ZFS - overfilled pool

installed Solaris 11 Express on my server machine a while ago. I created a Z2 RAID over five HDDs and created a few ZFS filesystems on it. Once I (unintentionally) managed to fill the pool completely with data and (to my surprise) the filesystems stopped working - I could not read/delete any... (3 Replies)
Discussion started by: RychnD
3 Replies

8. Solaris

ZFS - Dataset / pool name are the same...cannot destroy

I messed up my pool by doing zfs send...recive So I got the following : zpool list NAME SIZE ALLOC FREE CAP DEDUP HEALTH ALTROOT rpool 928G 17.3G 911G 1% 1.00x ONLINE - tank1 928G 35.8G 892G 3% 1.00x ONLINE - So I have "tank1" pool. zfs get all... (8 Replies)
Discussion started by: eladgrs
8 Replies

9. Solaris

Zpool with 3 2-way mirrors in a pool

I have a single zpool with 3 2-way mirrors ( 3 x 2 way vdevs) it has a degraded disk in mirror-2, I know I can suffer a single drive failure, but looking at this how many drive failures can this suffer before it is no good? On the face of it, I thought that I could lose a further 2 drives in each... (4 Replies)
Discussion started by: fishface
4 Replies

10. Solaris

How to clear a removed single-disk pool from being listed by zpool import?

On an OmniOS server, I removed a single-disk pool I was using for testing. Now, when I run zpool import it will show it as FAULTED, since that single disk not available anymore. # zpool import pool: fido id: 7452075738474086658 state: FAULTED status: The pool was last... (11 Replies)
Discussion started by: priyadarshan
11 Replies
installboot(1M) 														   installboot(1M)

NAME
installboot - install bootblocks in a disk partition SYNOPSIS
installboot bootblk raw-disk-device The boot(1M) program, ufsboot, is loaded from disk by the bootblock program which resides in the boot area of a disk partition. The ufs boot objects are platform-dependent, and reside in the /usr/platform/platform-name/lib/fs/ufs directory. The platform name can be found using the -i option of uname(1). The installboot utility is a SPARC only program. It is not supported on the architecture. users should use installgrub(1M) instead. bootblk The name of the bootblock code. raw-disk-device The name of the disk device onto which the bootblock code is to be installed; it must be a character device which is read- able and writable. Naming conventions for a SCSI or IPI drive are c?t?d?s? and c?d?s? for an IDE drive. Example 1: Installing UFS Boot Block To install a ufs boot block on slice 0 of target 0 on controller 1 of the platform where the command is being run, use: example# installboot /usr/platform/`uname -i`/lib/fs/ufs/bootblk /dev/rdsk/c1t0d0s0 /usr/platform/platform-name/lib/fs/ufs directory where ufs boot objects reside. /platform/platform-name/ufsboot second level program to boot from a disk or CD See attributes(5) for descriptions of the following attributes: +-----------------------------+-----------------------------+ | ATTRIBUTE TYPE | ATTRIBUTE VALUE | +-----------------------------+-----------------------------+ |Availability |SUNWcsu | +-----------------------------+-----------------------------+ od(1), uname(1), boot(1M), init(1M), kadb(1M), kernel(1M), monitor(1M), reboot(1M), rpc.bootparamd(1M), init.d(4), attributes(5) WARNINGS
The installboot utility fails if the bootblk or openfirmware files do not exist or if the raw disk device is not a character device. 11 Apr 2005 installboot(1M)
All times are GMT -4. The time now is 07:48 AM.
Unix & Linux Forums Content Copyright 1993-2022. All Rights Reserved.
Privacy Policy