09-12-2012
AIX 4.2.1 Tape Drive Problem
Hi,
The problem I have is I want to restore my AIX machine. I have created a mksysb tape from my tape drive rmt0 and I changed the bootlist using this command "bootlist -m normal rmt0 hdisk0".
However, when I display the bootlist "bootlist -om normal", it shows '-' hdisk0. I googled and found this :If a device specified in the boot list is no longer present on the system, a `-' is displayed instead of a name.
I can use my tape drive to create a mksysb tape successfully and its state is available after doing a lsdev -Cc tape.
So my question is how do I resolve this? Thanks
10 More Discussions You Might Find Interesting
1. AIX
I have a dlt tape drive on a AIX 5.1 machine, I have no idea how to backup to this thing, would I just mount it can copy over to it, not sure the commands or where to begin? Can anyone help, or point me to documentation.... (14 Replies)
Discussion started by: csaunders
14 Replies
2. AIX
Currently I have a Dell Ultrium LTO 2 Tape Drive. I am going to have a IBM AIX server. Just wonder if it is possibe to connect this tape drive to the aix server? I have Brightstor Arcserver installed on another win 2003 server. Is it possible to install the arcserve agent on the aix and use the... (1 Reply)
Discussion started by: ming413
1 Replies
3. AIX
I've just landed in a situation where an old IBM RS/6000 7025 F40 running AIX 4.2.1 has had it's tape drive fail. The tape drive in question is an HP C1533A 4mm 4GB/8GB DAT drive. It repeatedly gets write failures, and my trusty techique of whacking the cleaning tape in hasn't worked. Unfortunately... (2 Replies)
Discussion started by: phaedrus
2 Replies
4. AIX
Hi,
Help required!
How to mount internal tape drive of sun machine in AIX 5.3 (0 Replies)
Discussion started by: ashwin.krishna
0 Replies
5. SCO
I replaced a HP Superstore Dat 40 with another HP Superstore Dat 40, but my backupedge software keeps putting up error code 1 (device not found) I have tried reinstaling the drive as DAT Alad stp 0 6 0 0. I'm not a computer expert but willing to have a go. I went into Backupedge to try and format a... (2 Replies)
Discussion started by: James Zwecker
2 Replies
6. AIX
Dear all,
I have ultriam3 tape. It is connected my LPAR. I have that the Sl.Nos. and slot number. but run the cfmgr i am not getting the tape drive.
I have fired the command lsdev -Cc tape but no reply.
how will i configure the tape in LPAR?
Please suggest. It is very urgent. (3 Replies)
Discussion started by: pernasivam
3 Replies
7. AIX
Hi,
I have recently purchase a SUN Storage Tek desktop LTO 4 HH tape drive and connected to a IBM AIX 5.1 server.
The server can detect the tape device.
Can someone please advice urgently.
Thanks (4 Replies)
Discussion started by: Caully
4 Replies
8. AIX
Hi,
I'm at AIX 5.3.
My EOD program is giving following error while writing to tape:
Can't write output
cpio: Media Surface error
Failed on Shell-script
cd /; cpio -ocB 2 >> /autoline/misc/logs/bk.CopyToTape < /autoline/work/BACKUP.01022 1>/dev/rm0
I have tried with several new tapes,... (2 Replies)
Discussion started by: tayyabq8
2 Replies
9. Hardware
I've had a scsi hard drive, scsi tape drive, and cd rom working off an adaptec 29160 controller. Everything worked great until a few days ago. I begin getting tar format errors (running sco 5.0.6) on the tape drive and occasionally the entire system would hang up while trying to access data on... (0 Replies)
Discussion started by: powwm
0 Replies
10. AIX
Hi
I need to make some restore tapes for our old AIX systems
I have purchased some DDS2 tapes and cleaning tapes
The tape drive is rmt0
what commands can I enter to run the cleaning tape through the drive
and are the any commands I can enter to test these drives
prior to using... (2 Replies)
Discussion started by: madmacher
2 Replies
st(1M) st(1M)
NAME
st - shared tape administration
SYNOPSIS
device_file
DESCRIPTION
The command provides users with a command-line interface to check the status of a shared tape device or to reclaim a shared tape device
from a host system that has failed while holding a reservation on the shared tape device. The command can also be used for the same pur-
pose on shared library robotic devices. To use the command you must have root user id.
Please see examples below for usage.
Options
recognizes the following options and arguments:
Specifies the tape device file or sctl/esctl pass-through device
file for the shared tape/library device. This parameter is mandatory and will report an error if device_file is omitted.
Allows the user to reclaim a shared tape device or shared
library robotic device in the case where a host failed while holding a reservation on the shared device. This option causes
a bus device reset to be issued to the device specified by the option.
Prints out the current status of the shared tape/library
device specified by the option.
RETURN VALUE
returns 0 upon successful completion and 1 otherwise.
EXAMPLES
The following shows three examples of output from the above command.
The above output indicates that the shared device is reserved by another host and is therefore unavailable at this time.
The above output indicates that the shared device is not ready for use at this time.
The above output indicates that the shared device is ready for use at this time.
To reclaim a shared tape/library device from a failed host, the following command can be used:
WARNINGS
The option must be used with care. When reclaiming devices, it must be ensured that the host from which the device is being reclaimed has
in fact failed, as data may be lost as the result of reclaiming a device that is currently in use by another host.
AUTHOR
was developed by Hewlett-Packard.
SEE ALSO
mt(1), scsi(7), scsi_ctl(7).
st(1M)