Can sed be used to take a existing record and reverse the order of defined character placement if there is no delimeters?
existing record:
0123456789CO
expected result:
9876543210CO
if there were delimeters I could define the delimeter and each placement would have an id which I... (1 Reply)
Hello, I am aware that our system has two hard drives with raid but i'm not sure as to the type of raid the system uses.
I tried this.
# df
Filesystem 512-blocks Free %Used Iused %Iused Mounted on
/dev/hd4 229376 76272 67% 6748 12% /
/dev/hd2 3080192... (1 Reply)
Dear ALl,
I have a RAID 5 volume which is as below
d120 r 60GB c1t2d0s5 c1t3d0s5 c1t4d0s5 c1t5d0s5
d7 r 99GB c1t2d0s0 c1t3d0s0 c1t4d0s0 c1t5d0s0
d110 r 99GB c1t2d0s4 c1t3d0s4 c1t4d0s4 c1t5d0s4
d8 r 99GB c1t2d0s1 c1t3d0s1... (2 Replies)
Hello All,
I have read enough of texts on Raid 01 and Raid 10 on solaris :wall: . But no-where found a way to create them using SVM. Some one pls tell me how to do or Post some link if that helps.
TIA
Curious
solarister (1 Reply)
Hello,
I have a scsi pci x raid controller card on which I had created a disk array of 3 disks
when I type lspv ; I used to see 3 physical disks ( two local disks and one raid 5 disk )
suddenly the raid 5 disk array disappeared ; so the hardware engineer thought the problem was with SCSI... (0 Replies)
Server Model: T5120 with 146G x4 disks.
OS: Solaris 10 - installed on c1t0d0.
Plan to use software raid (veritas volume mgr) on c1t2d0 disk.
After format and label the disk, still not able to detect using vxdiskadm.
Question:
Should I remove the hardware raid on c1t2d0 first?
My... (4 Replies)
Hello,
I want to delete a RAID configuration an old server has.
Since i haven't the chance to work with the specific raid controller in the past can you please help me how to perform the configuraiton?
I downloaded IBM ServeRAID Support CD but i wasn't able to configure the video card so i... (0 Replies)
Discussion started by: @dagio
0 Replies
LEARN ABOUT HPUX
vxdestroy_lvmroot
vxdestroy_lvmroot(1M)vxdestroy_lvmroot(1M)NAME
vxdestroy_lvmroot - remove LVM root disk and associated LVM volume group
SYNOPSIS
vxdestroy_lvmroot [-v] [-b] lvm_root_disk
DESCRIPTION
The vxdestroy_lvmroot command tears down and removes the LVM volume group associated with the specified physical disk. This is done by
removing the volumes in the volume group and then removing the volume group.
OPTIONS -b Invokes the setboot command to change the primary boot disk to the VxVM root disk from which the system was booted (if the pri-
mary boot disk is not already set to this disk). The alternate boot device remains unchanged. If the -v option is also speci-
fied, the settings of the primary and alternate boot devices are displayed.
-v Outputs verbose messages including a timestamp that indicates major operations being performed.
ARGUMENTS
lvm_root_disk
Specifies the device name of the LVM root disk that is to be destroyed, along with its entire volume group.
EXAMPLES
This example shows the vxdestroy_lvmroot command invoked in its simpliest form:
/etc/vx/bin/vxdestroy_lvmroot c5t1d0
# /etc/vx/bin/vxdestroy_lvmroot -v -b c3t0d0
Are you sure about destroying c3t0d0 (imported on VG /dev/vg02) ? YES
vxdestroy_lvmroot 06:02: Tearing down /dev/vg02 on device c3t0d0
vxdestroy_lvmroot 06:02:
Unmounting and removing any volumes associated with /dev/vg02
vxdestroy_lvmroot 06:02: removing logical volume /dev/vg02/lvol1
vxdestroy_lvmroot 06:02: removing logical volume /dev/vg02/lvol2
vxdestroy_lvmroot 06:02: removing logical volume /dev/vg02/lvol3
vxdestroy_lvmroot 06:02: removing logical volume /dev/vg02/lvol4
vxdestroy_lvmroot 06:02: removing logical volume /dev/vg02/lvol5
vxdestroy_lvmroot 06:02: removing logical volume /dev/vg02/lvol6
vxdestroy_lvmroot 06:02: removing logical volume /dev/vg02/lvol7
vxdestroy_lvmroot 06:02: removing logical volume /dev/vg02/lvol8
vxdestroy_lvmroot 06:02: Removing Volume Group /dev/vg02
vxdestroy_lvmroot 06:02: Removing device files in /dev/vg02
vxdestroy_lvmroot 06:02: Removing LVM Physical Volume c3t0d0
vxdestroy_lvmroot 06:02: Removing LVM Physical Volume c1t1d3
vxdestroy_lvmroot 06:02: Removing LVM Physical Volume c1t1d4
vxdestroy_lvmroot 06:02: Removing LVM Physical Volume c1t1d5
vxdestroy_lvmroot 06:03: Current setboot values:
vxdestroy_lvmroot 06:03: Primary: 0/0/6/0/0.0.0
vxdestroy_lvmroot 06:03: Alternate: 0/0/1/0/0.1.0
vxdestroy_lvmroot 06:03:
Making disk c0t1d0 (0/0/1/0/0.1.0) the primary boot disk
vxdestroy_lvmroot 06:03:
Removal of device c3t0d0, volume group /dev/vg02 was successful
SEE ALSO cpio(1), dd(1), fsck(1M), setboot(1M)vxbootsetup(1M)vxcp_lvmroot(1M)vxres_lvmroot(1M)VxVM 5.0.31.1 24 Mar 2008 vxdestroy_lvmroot(1M)