I am trying to reconstruct a failed 4 disk RAID5 Western Digital ShareSpace device using 3 of the 4 disks connected via USB to an Ubuntu 12.04 machine. I get what seems like a successful re-assemble from -
Can sed be used to take a existing record and reverse the order of defined character placement if there is no delimeters?
existing record:
0123456789CO
expected result:
9876543210CO
if there were delimeters I could define the delimeter and each placement would have an id which I... (1 Reply)
Hello, I am aware that our system has two hard drives with raid but i'm not sure as to the type of raid the system uses.
I tried this.
# df
Filesystem 512-blocks Free %Used Iused %Iused Mounted on
/dev/hd4 229376 76272 67% 6748 12% /
/dev/hd2 3080192... (1 Reply)
Dear ALl,
I have a RAID 5 volume which is as below
d120 r 60GB c1t2d0s5 c1t3d0s5 c1t4d0s5 c1t5d0s5
d7 r 99GB c1t2d0s0 c1t3d0s0 c1t4d0s0 c1t5d0s0
d110 r 99GB c1t2d0s4 c1t3d0s4 c1t4d0s4 c1t5d0s4
d8 r 99GB c1t2d0s1 c1t3d0s1... (2 Replies)
Hello All,
I have read enough of texts on Raid 01 and Raid 10 on solaris :wall: . But no-where found a way to create them using SVM. Some one pls tell me how to do or Post some link if that helps.
TIA
Curious
solarister (1 Reply)
Hello,
I have a scsi pci x raid controller card on which I had created a disk array of 3 disks
when I type lspv ; I used to see 3 physical disks ( two local disks and one raid 5 disk )
suddenly the raid 5 disk array disappeared ; so the hardware engineer thought the problem was with SCSI... (0 Replies)
Server Model: T5120 with 146G x4 disks.
OS: Solaris 10 - installed on c1t0d0.
Plan to use software raid (veritas volume mgr) on c1t2d0 disk.
After format and label the disk, still not able to detect using vxdiskadm.
Question:
Should I remove the hardware raid on c1t2d0 first?
My... (4 Replies)
Hello,
I want to delete a RAID configuration an old server has.
Since i haven't the chance to work with the specific raid controller in the past can you please help me how to perform the configuraiton?
I downloaded IBM ServeRAID Support CD but i wasn't able to configure the video card so i... (0 Replies)
Discussion started by: @dagio
0 Replies
LEARN ABOUT CENTOS
vgscan
VGSCAN(8) System Manager's Manual VGSCAN(8)NAME
vgscan - scan all disks for volume groups and rebuild caches
SYNOPSIS
vgscan [-d|--debug] [-h|-?|--help] [--ignorelockingfailure] [--mknodes] [-P|--partial] [-v|--verbose]
DESCRIPTION
vgscan scans all SCSI, (E)IDE disks, multiple devices and a bunch of other disk devices in the system looking for LVM physical volumes and
volume groups. Define a filter in lvm.conf(5) to restrict the scan to avoid a CD ROM, for example.
In LVM2, vgscans take place automatically; but you might still need to run one explicitly after changing hardware.
OPTIONS
See lvm(8) for common options.
--mknodes
Also checks the LVM special files in /dev that are needed for active logical volumes and creates any missing ones and removes unused
ones.
--cache
Scan devices for LVM physical volumes and volume groups and instruct the lvmetad daemon to update its cached state accordingly.
SEE ALSO lvm(8), vgcreate(8), vgchange(8)Sistina Software UK LVM TOOLS 2.02.105(2)-RHEL7 (2014-03-26) VGSCAN(8)