Sponsored Content
Full Discussion: smartmontools ?
Operating Systems Solaris smartmontools ? Post 302693055 by jim mcnamara on Tuesday 28th of August 2012 01:33:37 PM
Old 08-28-2012
To my knowledge smartmontools were originally meant for open Solaris 11, not 10. As I understand it, the product analyzes disks using SATA, SCSi, and some other disk controller protocols, and then makes predictions about future failure probability.

Since OpenIndiana (open Solaris 11) and the whole open source thing for Solaris has pretty much died because of the oracle purchase of Sun, I would not hold out any hope for a retrofit of smartmontools for 10.

The open solaris thing has morphed into other open OSes. See:
illumos Home - illumos - illumos wiki
This User Gave Thanks to jim mcnamara For This Post:
 

2 More Discussions You Might Find Interesting

1. Filesystems, Disks and Memory

issue with smartmontools

Hi, I need help!! I am trying to monitoring the temperature and error rate for diffrent storage systems - hard disk, SCSI, RAIDs. For, Hard disk, smartctl works perfectly, but in case of SCSI and RAIDs, it fails. smartctl notify only about the storage systems, health (i.e., OK,etc) but not... (0 Replies)
Discussion started by: reply2priyanka
0 Replies

2. Filesystems, Disks and Memory

Smartmontools and fixing Unreadable Disk Sectors

I found a document: Bad block HOWTO for smartmontools My hard drive is Maxtor: root]# fdisk -lu /dev/hda Disk /dev/hda: 81.9 GB, 81964302336 bytes 255 heads, 63 sectors/track, 9964 cylinders, total 160086528 sectors Units = sectors of 1 * 512 = 512 bytes Disk identifier: 0x3f4e3f4d ... (0 Replies)
Discussion started by: justinian
0 Replies
grub(5) 																   grub(5)

NAME
grub - GRand Unified Bootloader software on Solaris The current release of the Solaris operating system is shipped with the GRUB (GRand Unified Bootloader) software. GRUB is developed and supported by the Free Software Foundation. The overview for the GRUB Manual, accessible at www.gnu.org, describes GRUB: Briefly, a boot loader is the first software program that runs when a computer starts. It is responsible for loading and transfer- ring control to an operating system kernel software (such as Linux or GNU Mach). The kernel, in turn, initializes the rest of the operating system (for example, a GNU [Ed. note: or Solaris] system). GNU GRUB is a very powerful boot loader that can load a wide variety of free, as well as proprietary, operating systems, by means of chain-loading. GRUB is designed to address the complexity of booting a personal computer; both the program and this manual are tightly bound to that computer platform, although porting to other platforms may be addressed in the future. [Ed. note: Sun has ported GRUB to the Solaris operating system.] One of the important features in GRUB is flexibility; GRUB understands filesystems and kernel executable formats, so you can load an arbitrary operating system the way you like, without recording the physical position of your kernel on the disk. Thus you can load the kernel just by specifying its file name and the drive and partition where the kernel resides. Among Solaris machines, GRUB is supported on platforms. The GRUB software that is shipped with Solaris adds two utilities not present in the open-source distribution: bootadm(1M) Enables you to manage the boot archive and make changes to the GRUB menu. installgrub(1M) Loads the boot program from disk. Both of these utilities are described in Solaris man pages. Beyond these two Solaris-specific utilities, the GRUB software is described in the GRUB manual, a PDF version of which is available from the Sun web site. Available in the same location is the grub(8) open-source man page. This man page describes the GRUB shell. boot(1M), bootadm(1M), installgrub(1M) http://www.gnu.org/software/grub 21 Apr 2005 grub(5)
All times are GMT -4. The time now is 04:26 AM.
Unix & Linux Forums Content Copyright 1993-2022. All Rights Reserved.
Privacy Policy