08-14-2012
What do you mean by "IPs are not shared"? If you have zone with shared network interface, then IP will show up in ifconfig -a output on the global zone as well as in the zone itself.
9 More Discussions You Might Find Interesting
1. Solaris
I have a general question regarding Zone Migration.
I have an older system that is currently running a zone configured with ProFTPD & SSL.
If I want to migrate or clone that zone to another (much newer) system, will I still have to setup & configure ProFTPD & SSL on the new system? (3 Replies)
Discussion started by: em23
3 Replies
2. Solaris
OK I am running solaris 10.
I made some changes to my ipf.conf file and issued the command:
ipf -Fa -f /etc/ipf/ipf.conf
to flush out the old and bring in the new changes.
When I ran ipfstat -ioh to verify it had brought in the new rule set I saw something I wasn't expecting to see.
I... (3 Replies)
Discussion started by: NewSolarisAdmin
3 Replies
3. Solaris
Hi all,
i am new learner in Zoning and virtualization Technology and i have some question's about it
i create zone using this step
zonecfg -z app-apache
create
set zonepath=/zone_adm/app-apache
add net
set address=192.168.1.250
set physical=bge0
end
set autoboot=true
verify
commit... (13 Replies)
Discussion started by: coxmanchester
13 Replies
4. Solaris
I'm trying to enable IPF ( ip filter ) on solaris 10 release 6/06 Solaris 10 6/06 s10s_u2wos_09a SPARC
so i enabled svc:/network/ipfilter:default
it was disabled by default and svc:/network/pfil:default was enabled and online
there only one config file under etc
$/etc/ipf/ipf.conf
i... (1 Reply)
Discussion started by: h@foorsa.biz
1 Replies
5. Cybersecurity
I'm running IPF on solaris 10
bash-3.00# ipf -V #display ipf version
ipf: IP Filter: v4.1.9 (592)
Kernel: IP Filter: v4.1.9
Running: yes
Log Flags: 0 = none set
Default: pass all, Logging: available
Active list: 1
Feature mask: 0x107
with the following rules
bash-3.00# ipfstat -o -i... (0 Replies)
Discussion started by: h@foorsa.biz
0 Replies
6. Solaris
I have two physical servers, with zones that mount local storage.
We were using "raw device" in the zonecfg to point to a metadevice on the global zone (it was not mounted in the global zone at any point).
It failed to mount on every boot because the directory existed in the zone.
I... (6 Replies)
Discussion started by: BG_JrAdmin
6 Replies
7. UNIX for Advanced & Expert Users
I've been going crazy trying to get this working. Here's the situation: we have a Solaris 10 box that connects an internal network to an external network. We're using ipf/ipnat on it. We've added a couple of new boxes to the internal network (192.168.1.100, .101) and want to be able to get to port... (1 Reply)
Discussion started by: spakov
1 Replies
8. Solaris
I have a question about losing a node in a zone cluster. Hopefully I can explain enough for someone to answer.
Let's say I have a zone cluster spread over 3 physical nodes. If Node1 crashes, would I be correct in assuming I would lose all zones on Node1?
If I lost Node1 below, would I lose... (4 Replies)
Discussion started by: MasonJ
4 Replies
9. UNIX for Advanced & Expert Users
Dear all,
recently, I migrated a solaris zone from one host to another. The zone was inside of a zpool. The zpool cotains two volumes.
I did the following:
host1:
$ zlogin zone1 shutdown -y -g0 -i0 #Zone status changes from running to installed
$ zpool export zone1
host2:
$ zpool... (2 Replies)
Discussion started by: custos
2 Replies
LEARN ABOUT OPENSOLARIS
zcons
zcons(7D) Devices zcons(7D)
NAME
zcons - Zone console device driver
DESCRIPTION
The zcons character driver exports the console for system zones. The driver is comprised of two "sides:" a master side with which applica-
tions in the global zone communicate, and a slave side, which receives I/O from the master side. The slave side is available in the global
zones.
Applications must not depend on the location of /dev or /devices entries exported by zcons. Inside a zone, the zcons slave side is fronted
by /dev/console and other console-related symbolic links, which are used by applications that expect to write to the system console.
The zcons driver is Sun Private, and may change in future releases.
FILES
/dev/zcons/<zonename>/masterconsole
Global zone master side console for zone <zonename>.
/dev/zcons/<zonename>/slaveconsole
Global zone slave side console for zone <zonename>.
/dev/zconsole
Non-global zone console (slave side).
ATTRIBUTES
See attributes(5) for descriptions of the following attributes:
+-----------------------------+-----------------------------+
| ATTRIBUTE TYPE | ATTRIBUTE VALUE |
+-----------------------------+-----------------------------+
|Availability |SUNWcsu |
+-----------------------------+-----------------------------+
| Interface Stability |Sun Private |
+-----------------------------+-----------------------------+
SEE ALSO
zoneadm(1M), zonecfg(1M), attributes(5), zones(5)
SunOS 5.11 24 Aug 2003 zcons(7D)