I had installed Fedora 16 a while back and chose to encrypt my home directory. I have removed the drive and installed a new drive, installed F17 and would like to attach the old drive externally and mount it to recover some of my data. I know the encryption password but I can't seem to find any solid procedures for getting it mounted.
This is the lv I would like to mount.
Code:
--- Logical volume ---
LV Path /dev/vg_loukinasfedor/lv_home
LV Name lv_home
VG Name vg_loukinasfedor
LV UUID 0PPquP-0oux-vt5Y-03Wu-nFmv-fWnz-JVglFz
LV Write Access read/write
LV Creation host, time ,
LV Status available
# open 0
LV Size 97.66 GiB
Current LE 3125
Segments 1
Allocation inherit
Read ahead sectors auto
- currently set to 256
Block device 253:9
Code:
[root@localhost vg_loukinasfedor]# vgchange -ay
7 logical volume(s) in volume group "vg_loukinasfedor" now active
0 logical volume(s) in volume group "vg2" now active
3 logical volume(s) in volume group "vg" now active
[root@localhost vg_loukinasfedor]# mount /dev/vg_loukinasfedor/lv_home /tmp/mount
mount: unknown filesystem type 'crypto_LUKS'
[root@localhost vg_loukinasfedor]#
Moderator's Comments:
code tags please
Last edited by jim mcnamara; 08-07-2012 at 12:44 PM..
Hi...
question is this:
How do I mount an LVD hotswap scsi drive in bay #2 on a netra using the mount command? volmgt doesn't seem to mount it and/or I don't know how to view the drives data if it's formatted which it may not be. This drive is not new out of the box so I'm not sure.
... (4 Replies)
I am using Redhat 9 Linux, and am trying to get my external usb drive mounted (fat32). If I look at the KDE Control panel, it lists a usb 2.0 storage device under "USB Devices" (also in /proc/bus/usb), and under "SCSI" as scsi1. I looked at /proc/scsi/usb-storage-0, and it lists it there also. What... (6 Replies)
i have a Simple Tech hard drive that i use between two computers. it is formatted to ntfs. i have a dell desktop with Ubuntu 7.10 and Ubuntu 8.04 and Windows XP Home. and i have a laptop with Ubuntu 7.10 and Ubuntu 8.04. the laptop recognizes the hard drive on both 8.04 and 7.10 but my desktop... (9 Replies)
Hi folks,
I've got a little problem concerning my external dds4 tape drive.
I've got 2 rs6000 systems, one has a external dds4 tape drive attached, I want to attach the tape drive to the other rs6000 system so that i can restore data from the 1st rs6000 on to the second.
Does anybody has... (3 Replies)
I am about to set up another triple boot drive, but this one is connected to my MacBook with a USB adapter. I want to be sure that I do not overwrite data on my laptop's internal drive. This is the command I used for the internal drive, which was found in an Ubuntu forum, but the sizes were changed... (0 Replies)
Trying to mount an external 160GB Toshiba drive but....
this is my dmesg tail output:
usb 2-2: new high speed USB device using ehci_hcd and address 3
usb 2-2: New USB device found, idVendor=13fd, idProduct=1618
usb 2-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
usb 2-2:... (4 Replies)
Hi Guys
I am using RHEL5 O/S.
We have mounted the usb external hard drive to the server as root.
I want the user oracle to be able to write into this external hard drive.
How do i do that ?
Please Help!!! (1 Reply)
I have connected an external hard drive. I can't find it.
Both ls /media, fdisk -l and ls /dev show nothing.
TIA (3 Replies)
Discussion started by: Meow613
3 Replies
LEARN ABOUT MOJAVE
lvremove
LVREMOVE(8) System Manager's Manual LVREMOVE(8)NAME
lvremove - remove a logical volume
SYNOPSIS
lvremove [-A|--autobackup {y|n}] [-d|--debug] [-h|--help] [-t|--test] [-v|--verbose] [--version] [-f|--force] [--noudevsync] LogicalVol-
ume{Name|Path} [LogicalVolume{Name|Path}...]
DESCRIPTION
lvremove removes one or more logical volumes. Confirmation will be requested before deactivating any active logical volume prior to
removal. Logical volumes cannot be deactivated or removed while they are open (e.g. if they contain a mounted filesystem). Removing an
origin logical volume will also remove all dependent snapshots.
If the logical volume is clustered then it must be deactivated on all nodes in the cluster before it can be removed. A single lvchange com-
mand issued from one node can do this.
OPTIONS
See lvm(8) for common options.
-f, --force
Remove active logical volumes without confirmation.
--noudevsync
Disable udev synchronisation. The process will not wait for notification from udev. It will continue irrespective of any possible
udev processing in the background. You should only use this if udev is not running or has rules that ignore the devices LVM2 cre-
ates.
EXAMPLES
Remove the active logical volume lvol1 in volume group vg00 without asking for confirmation:
lvremove -f vg00/lvol1
Remove all logical volumes in volume group vg00:
lvremove vg00
SEE ALSO lvcreate(8), lvdisplay(8), lvchange(8), lvm(8), lvs(8), lvscan(8), vgremove(8)Sistina Software UK LVM TOOLS 2.02.95(2) (2012-03-06) LVREMOVE(8)
08-07-2012
