Thank you all for your various and helpful suggestions. Eventually I decided to terminate late yesterday. I used GUI sys monitor and found all processes were sleeping. I entered 'kill -9' in terminal and tried to boot from the clone, unsuccessfully. Since then the disk has been declared healthy and without errors several ways and times.
I find the partition structure is the same as the original disk. Un-importantly, all my pre- partitioning has been lost. So, trying to boot with only the clone connected and going to recovery mode the following prints:-
Code:
Target filesystem doesn't have requested /sbin/init
No init found Try passing 'init= bootarg'
(bootarg does not appear in the list of commands in the provided help option and did not succeed).
This follows
Code:
'BusyBox v.1.18.4 (Ubuntu 1:1.18.4-2ubuntu2) built-in shell (ash)
Enter 'help' for a list of builtin commands'.
initramfs[prompt]
I feel that I am close to succeeding in producing a bootable disk, but why does 'dd' not return a prompt, or any message when finished. What please did I omit from the original syntax and also please what actions are necessary now to proceed to recover??
Hello everybody,
:confused:
I have to change the system disk on an old PC running SCO 5.0.5.
The disk is up and running, this is a preventive action.
My experience on UNIX is very limited and I look for the easyest solution to clone this unit.
Is it possible with commands or through a clone... (2 Replies)
I am using ufsdump and ufsrestore to clone the root disk on one of my servers. I would like to automate this as much as possible, but have run into a problem where it prompts for changing the owner/mode when it is complete.
Any ideas for running this in the background and not being prompted?
... (4 Replies)
Hello guys!
I use the Solaris 10 x86 machine.
I need to clone the boot disk.
Why, when I copy slice 1 - there is a following:
# ufsdump 0f - /dev/rdsk/c0d0s1 | (cd /mnt && ufsrestore rf - )
DUMP: Warning - super-block on device `/dev/rdsk/c0d01` is corrupt - run fsck
Dump: The Entire... (6 Replies)
Hi,
I'm running Ubuntu on my laptop. To keep my data safe and easy disaster recovery as well I bought similar HDD to one installed in my laptop with higher capacity and using USB box I'm doing disk clone to it. So at any time I can replace disk and carry on with my work as before.
I'm trying... (2 Replies)
Hello Friends,
Am in requirement to clone a Live HP-UX server here's details
OS: HpUX B-11.11 with mirrored LVM disks .
S/ws: Remedy, XML engine, Annoysystem, Oracle
All Oracle, XMl and Remedy data is on SAM LUN which is used for clustering .
My requirement to create a clone server and... (10 Replies)
Dear All
I needed to clone my disk to another hard drive . I did it as the following :
#dd if=/dev/sdb of=/dev/sdc
But after a while, the procedure ended with the "writing to /dev/sdc
input/output error" message.
Can you please let me know how can I overcome this as the fdisk now returns as "... (1 Reply)
Discussion started by: hadimotamedi
1 Replies
LEARN ABOUT MOJAVE
installboot
installboot(1M)installboot(1M)NAME
installboot - install bootblocks in a disk partition
SYNOPSIS
installboot bootblk raw-disk-device
The boot(1M) program, ufsboot, is loaded from disk by the bootblock program which resides in the boot area of a disk partition.
The ufs boot objects are platform-dependent, and reside in the /usr/platform/platform-name/lib/fs/ufs directory. The platform name can be
found using the -i option of uname(1).
The installboot utility is a SPARC only program. It is not supported on the architecture. users should use installgrub(1M) instead.
bootblk The name of the bootblock code.
raw-disk-device The name of the disk device onto which the bootblock code is to be installed; it must be a character device which is read-
able and writable. Naming conventions for a SCSI or IPI drive are c?t?d?s? and c?d?s? for an IDE drive.
Example 1: Installing UFS Boot Block
To install a ufs boot block on slice 0 of target 0 on controller 1 of the platform where the command is being run, use:
example# installboot /usr/platform/`uname -i`/lib/fs/ufs/bootblk
/dev/rdsk/c1t0d0s0
/usr/platform/platform-name/lib/fs/ufs
directory where ufs boot objects reside.
/platform/platform-name/ufsboot
second level program to boot from a disk or CD
See attributes(5) for descriptions of the following attributes:
+-----------------------------+-----------------------------+
| ATTRIBUTE TYPE | ATTRIBUTE VALUE |
+-----------------------------+-----------------------------+
|Availability |SUNWcsu |
+-----------------------------+-----------------------------+
od(1), uname(1), boot(1M), init(1M), kadb(1M), kernel(1M), monitor(1M), reboot(1M), rpc.bootparamd(1M), init.d(4), attributes(5)WARNINGS
The installboot utility fails if the bootblk or openfirmware files do not exist or if the raw disk device is not a character device.
11 Apr 2005 installboot(1M)
07-27-2012
Update init missing
