I have been tasked with archiving Oracle tables. The data is on raw devices, and possibly will span multiple logical volumes.
Has anyone ever had to do this? How did you accomplish it?
Any references to accomplish this would be greatly appreciated.
Thanks, (2 Replies)
Hello
I wonder if someone could help me in reading a raw (non-Solaris) disk on a Solaris system...
I have an IDE HDD in my Sun Blade and would like to read it (using C). It appears on the system and with the format command shows up as c0t1d0.
I use the dd command to read the disk as such:... (19 Replies)
Hi all,
I would like to know how to make new partitions....
I currently have allocated 60G for various slices (I have totally used 4 out of 7 available slices...
I am running only solaris on my box.
My plan is to have entire disk dedicated to solaris and run other OS from within... (19 Replies)
I am using Solaris 10. I have a raw device attached to my system which is
/dev/md/rdsk/d91
I want to mount this as a disk with file system on a mount point /u05.
Actually this raw device was earlier part of Oracle ASM. Now I have removed this disk from ASM, and want to use it as normal... (3 Replies)
there are few nas shares that would be mounted on the local zone. should i add an entry into the add an entry in zone.xml file so that it gets mounted automatically when the zone gets rebooted? or whats the correct way to get it mounted automatically when the zone reboots (2 Replies)
I have a solaris 10 system configured using NetApp as its storage, and the file systems are already configured as you can see from the example below:
root@moneta # df -h
Filesystem size used avail capacity Mounted on
/dev/md/dsk/d0 9.8G 513M 9.3G 6% /
... (0 Replies)
I have a solaris 10 system configured using NetApp as its storage, and the file systems are already configured as you can see from the example below:
root@moneta # df -h
Filesystem size used avail capacity Mounted on
/dev/md/dsk/d0 9.8G 513M 9.3G 6% /... (4 Replies)
Hi All,
Hope someone can help me with this.
I have noticed that on some of the servers i am currently administering there is a difference in the setup of some of the LVM disks.
Some of the disks have been created by SN disk allocated, disk partitioned using type 8e over the entire disk,... (2 Replies)
Hi:
The OS is Slackware 14.0. When, after 14.0 install I first ran alsamixer, I got an error message and it quit. After some googling, I created /etc/modprobe.d/alsa.conf with these lines:
alias snd-card-0 snd_hda_intel
alias sound-slot-0 snd_hda_intel
options snd_hda_intel... (0 Replies)
Discussion started by: stf92
0 Replies
LEARN ABOUT OPENSOLARIS
cmdk
cmdk(7D) Devices cmdk(7D)NAME
cmdk - common disk driver
SYNOPSIS
cmdk@target, lun : [ partition | slice ]
DESCRIPTION
The cmdk device driver is a common interface to various disk devices. The driver supports magnetic fixed disks and magnetic removable
disks.
The cmdk device driver supports three different disk labels: fdisk partition table, Solaris x86 VTOC and EFI/GPT.
The block-files access the disk using the system's normal buffering mechanism and are read and written without regard to physical disk
records. There is also a "raw" interface that provides for direct transmission between the disk and the user's read or write buffer. A sin-
gle read or write call usually results in one I/O operation; raw I/O is therefore considerably more efficient when many bytes are transmit-
ted. The names of the block files are found in /dev/dsk. Raw file names are found in /dev/rdsk.
I/O requests to the magnetic disk must have an offset and transfer length that is a multiple of 512 bytes or the driver returns an EINVAL
error.
Slice 0 is normally used for the root file system on a disk, slice 1 as a paging area (for example, swap), and slice 2 for backing up the
entire fdisk partition for Solaris software. Other slices may be used for usr file systems or system reserved area.
The fdisk partition 0 is to access the entire disk and is generally used by the fdisk(1M) program.
FILES
/dev/dsk/cndn[s|p]n block device (IDE)
/dev/rdsk/cndn[s|p]n raw device (IDE)
where:
cn controller n.
dn lun n (0-1).
sn UNIX system slice n (0-15).
pn fdisk partition (0-36).
/kernel/drv/cmdk 32-bit kernel module.
/kernel/drv/amd64/cmdk 64-bit kernel module.
ATTRIBUTES
See attributes(5) for descriptions of the following attributes:
+-----------------------------+-----------------------------+
| ATTRIBUTE TYPE | ATTRIBUTE VALUE |
+-----------------------------+-----------------------------+
|Architecture |x86 |
+-----------------------------+-----------------------------+
SEE ALSO fdisk(1M), mount(1M), lseek(2), read(2), write(2), readdir(3C), scsi(4), vfstab(4), attributes(5), dkio(7I)SunOS 5.11 4 Nov 2008 cmdk(7D)