07-17-2012
Is the gateway 10.1.40.1 external ie. not an LPAR but a router? If yes, you might be missing a SEA (Shared Ethernet Adapter) to bridge the VLAN to the physical LAN. Maybe compare with the LPARs that are working, if they use a SEA.
In the output of your lsdev -Ccadapter I see no SEA listed. That could be it.
10 More Discussions You Might Find Interesting
1. AIX
I have a P570 that for some reason is not allowing the P1-T6 NIC to be recognized. I have confirmed from the HMC that it is set for the LPAR, but when I do a cfgmgr, it won't recognize it. It though is recognizing the slot cards just fine which are P1-C3 for one shelf and P1-C3 of another shelf.... (1 Reply)
Discussion started by: LegendMan
1 Replies
2. IP Networking
Dear friends,
Please explain the functionality of the ping command and explain the network details, and IP layers.
I want some more clarification about following things
i) switch
ii) hub
iii) routers
iv) proxy (3 Replies)
Discussion started by: thangappan
3 Replies
3. AIX
I am planning for System P with 2 number of 2-core processor (4 core in total).
Can I make 3 LPARS with this processor configuration without the support of micropartitioning, that means with simple LPAR only. (3 Replies)
Discussion started by: pchangba
3 Replies
4. AIX
can i get a step b syep explanation in creating LPAR... i have searched for tutorials i couldn't find the right one.... (2 Replies)
Discussion started by: udtyuvaraj
2 Replies
5. AIX
Hi all,
I have the following configuration
2 ds3524 storage disk systems located over 2 locations
2 P720 server located over 2 locations
DS3524 are connected to san switch.
Each vio server has 1 fc adapter attached to a san switch.
per p720 server 2 virtual io servers. Vio 1 has 1 lun... (2 Replies)
Discussion started by: markiemark
2 Replies
6. Shell Programming and Scripting
Hi,
I develop simple animation ping script on Solaris Platform. It is like Cisco ping.
Examples and source code are below.
bash-3.00$ gokcell 152.155.180.8 30
Sending 30 Ping Packets to 152.155.180.8
!!!!!!!!!!!!!.!!!!!!!!!!!!!!!.
% 93.33 success... % 6.66 packet loss...... (1 Reply)
Discussion started by: gokcell
1 Replies
7. AIX
Hi,
I installed AIX 7.1 on a blade though (hmc with vio). I can ping the IP address, but not the gateway. Is there anything that I should configure?
Is there anything that I have to check with vio setting or Am I missing any configuration?
Please let me know further.
Thank you (5 Replies)
Discussion started by: pjeedu2247
5 Replies
8. Shell Programming and Scripting
Hi
I am using perl to ping a list of nodes - with script below :
$p = Net::Ping->new("icmp");
if ($p->ping($host,1)){
print "$host is alive.\n";
}
else {
print "$host is unreacheable.\n";
}
$p->close();... (4 Replies)
Discussion started by: tavanagh
4 Replies
9. AIX
There can be configurations in IBM Server wherein a
standalone partition is created on some supported IBM Server
Or
A VIOS - VIOC LPARs created.
Now in both cases they are lpars. But if I want to differentiate b/w a standalone LPAR vs an VIOC LPAR how can I do..?
On a... (2 Replies)
Discussion started by: Manish00712
2 Replies
10. Programming
help with bash script!
im am working on this script to make sure my server will stay online, so i made this script..
HOSTS="192.168.138.155"
COUNT=4
pingtest(){
for myhost in "$@"
do
ping -c "$COUNT" "$myhost" &&return 1
done
return 0
}
if pingtest $HOSTS
#100% failed... (4 Replies)
Discussion started by: mort3924
4 Replies
LSDEV(8) Linux System Manual LSDEV(8)
NAME
lsdev - display information about installed hardware
SYNOPSIS
lsdev
DESCRIPTION
lsdev gathers information about your computer's installed hardware from the interrupts, ioports and dma files in the /proc directory, thus
giving you a quick overview of which hardware uses what I/O addresses and what IRQ and DMA channels.
OPTIONS
None.
FILES
/proc/interrupts
IRQ channels.
/proc/ioports
I/O memory addresses.
/proc/dma
DMA channels.
BUGS
lsdev can't always figure out which lines in the three examined files refer to one and the same device, because these files sometimes use
different names for the same piece of hardware. For example, in some kernels the keyboard is referred to as `kbd' in /proc/ioports and as
`keyboard' in /proc/interrupts. This should be fixed in the kernel, not in lsdev (as has indeed happened for this particular example).
The program does however try to match lines by stripping anything after a space or open parenthesis from the name, so that e.g. the
`serial' lines from /proc/interrupts match the `serial(set)' lines from /proc/ioports. This attempt at DWIM might be considered a bug in
itself.
This program only shows the kernel's idea of what hardware is present, not what's actually physically available.
SEE ALSO
procinfo(8).
AUTHOR
Sander van Malssen <svm@kozmix.cistron.nl>
3rd Release 1998-05-31 LSDEV(8)