Hi,
I use following command to restore data from my cpio tape archive:
$cpio -icvd < /dev/rct0
But this'll restore all tape contents to the current path, what if I want only selected files from the tape, suppose I want
/home/compdir/home2/Rev83/data/PL/01/*.*
files to be restored... (8 Replies)
Hi all,
I would like to know what would happen if the tape (media) is not placed on the drive and a tar command is executed to backup on the tape.
My problem is that tar command hanged for multiple days instead of throwing the error,
Is it valid behaviour?
I was unable to test the... (4 Replies)
Thanks for any insights you might have...
I have a RH8 system setup with a DAT drive.
I have a AIX tape that was made using cpio.
Bottom line is I need to read the AIX tape into the RH box.
I was able to do cpio -itv --no-absolute-filenames < /dev/st0 and read the table of contents.
... (0 Replies)
I'm having problems getting backups working on SCO OpenServer 5.7.
using the following command:
find / -depth -print | cpio -ocvB -O /dev/rct0
some files are backed up then the following error is reported:
Reached end of medium on output.
Device /dev/rct0: Change to part 2 and... (6 Replies)
Hi,
I was wondering, If I take a backup using cpio to tape from UNIX, can I extract data on windows box using cpio for windows? Anybody ever do this?
Thanks. (1 Reply)
I'm using Bacula as my backup system, with full backups going to an LTO2 tape drive, while differentials and incrementals go to a disk array on my main server, babylon4. The tape drive is currently attached to a separate machine, because babylon4 does not have a SCSI controller, nor a free PCI-X... (0 Replies)
I am trying to restore opt on my server.
my issue is, all the partitions are saved into the same back up tape.
what is the exact command to just restore /opt for example, supposing c0t0d0s7 is the partition for /opt
---------- Post updated at 01:16 PM ---------- Previous update was at... (7 Replies)
Hi all,
I'm having a problem here my environment as follows.
AIX 5.3 TL 10 running on a P6 p520 sever with 3 fibre channel cards and Tivoli Storage Manager TSM 5.4 and TS3200 Tape Library with 2 drives and 2 media changers.
My problem as follows smc1 doesn't show up , I ran cfgmgr multiple... (6 Replies)
Hi.
I have this old server onto which i needed to list the content of a tape. This is a SCO box (SCO_SV 3.2 5.0.6 i386) and backup was done using cpio.
#tape status
status : ready beginning-of-tape
soft errors : 0
hard errors : 0
underruns : 0
#dtype /dev/rct0
/dev/rct0 ... (5 Replies)
Hi all,
I've got two HP machines running HP-UX 11.31 and would like to remotely backup one server onto another server's tape unit using the cpio command.
The two servers use a secured communication channel, i.e ssh.
Kindly help,
Koketso (1 Reply)