STANDARD-MIB(7) 							MIB							   STANDARD-MIB(7)

STANDARD-MIB DEFINITIONS ::= BEGIN

     IMPORTS
	  Counter, TimeTicks
	       FROM RFC1155-SMI
	  OBJECT-TYPE
	       FROM RFC-1212
	  DisplayString, mib-2
	       FROM RFC1213-MIB
	  ;

-- Standard Datatypes

-- From SNMPv2 (rfc1903)
TruthValue ::=
-- Represents a boolean value
      INTEGER { true(1), false(2) }

-- From SNMPv2 (rfc1903)
DateAndTime ::=
--    DESCRIPTION
--	      "A date-time specification.
--
--	      field  octets  contents		       range
--		1      1-2   year		       0..65536
--		2	3    month		       1..12
--		3	4    day		       1..31
--		4	5    hour		       0..23
--		5	6    minutes		       0..59
--		6	7    seconds		       0..60
--			     (use 60 for leap-second)
--		7	8    deci-seconds	       0..9
--		8	9    direction from UTC        '+' / '-'
--		9      10    hours from UTC	       0..11
--	       10      11    minutes from UTC	       0..59
--
--	      For example, Tuesday May 26, 1992 at 1:30:15 PM EDT would be
--	      displayed as:
--
--			       1992-5-26,13:30:15.0,-4:0
--
--	      Note that if only local time is known, then timezone
--	      information (fields 8-10) is not present."
     OCTET STRING (SIZE (8 | 11))

-- From SNMPv2 (rfc1903)
RowStatus ::=
     INTEGER {
	  -- the following two values are states:
	  -- these values may be read or written
	  active(1),
	  notInService(2),

	  -- the following value is a state:
	  -- this value may be read, but not written
	  notReady(3),

	  -- the following three values are
	  -- actions: these values may be written,
	  --   but are never read
	  createAndGo(4),
	  createAndWait(5),
	  destroy(6)
	  }

system	     OBJECT IDENTIFIER ::= { mib-2 1 }
snmp	     OBJECT IDENTIFIER ::= { mib-2 11 }

-- the System group

-- Implementation of the System group is mandatory for all
-- systems.  If an agent is not configured to have a value
-- for any of these variables, a string of length 0 is
-- returned.

sysDescr OBJECT-TYPE
     SYNTAX  DisplayString (SIZE (0..255))
     ACCESS  read-only
     STATUS  mandatory
     DESCRIPTION
	  "A textual description of the entity.  This value
	  should include the full name and version
	  identification of the system's hardware type,
	  software operating-system, and networking
	  software.  It is mandatory that this only contain
	  printable ASCII characters."
     ::= { system 1 }

sysObjectID OBJECT-TYPE
     SYNTAX  OBJECT IDENTIFIER
     ACCESS  read-only
     STATUS  mandatory
     DESCRIPTION
	  "The vendor's authoritative identification of the
	  network management subsystem contained in the
	  entity.  This value is allocated within the SMI
	  enterprises subtree (1.3.6.1.4.1) and provides an
	  easy and unambiguous means for determining `what
	  kind of box' is being managed.  For example, if
	  vendor `Flintstones, Inc.' was assigned the
	  subtree 1.3.6.1.4.1.4242, it could assign the
	  identifier 1.3.6.1.4.1.4242.1.1 to its `Fred
	  Router'."
     ::= { system 2 }

sysUpTime OBJECT-TYPE
     SYNTAX  TimeTicks
     ACCESS  read-only
     STATUS  mandatory
     DESCRIPTION
	  "The time (in hundredths of a second) since the
	  network management portion of the system was last
	  re-initialized."
     ::= { system 3 }

sysContact OBJECT-TYPE
     SYNTAX  DisplayString (SIZE (0..255))
     ACCESS  read-write
     STATUS  mandatory
     DESCRIPTION
	  "The textual identification of the contact person
	  for this managed node, together with information
	  on how to contact this person."
     ::= { system 4 }

sysName OBJECT-TYPE
     SYNTAX  DisplayString (SIZE (0..255))
     ACCESS  read-write
     STATUS  mandatory
     DESCRIPTION
	  "An administratively-assigned name for this
	  managed node.  By convention, this is the node's
	  fully-qualified domain name."
     ::= { system 5 }

sysLocation OBJECT-TYPE
     SYNTAX  DisplayString (SIZE (0..255))
     ACCESS  read-write
     STATUS  mandatory
     DESCRIPTION
	  "The physical location of this node (e.g.,
	  `telephone closet, 3rd floor')."
     ::= { system 6 }

sysServices OBJECT-TYPE
     SYNTAX  INTEGER (0..127)
     ACCESS  read-only
     STATUS  mandatory
     DESCRIPTION
	  "A value which indicates the set of services that
	  this entity primarily offers.

	  The value is a sum.  This sum initially takes the
	  value zero, Then, for each layer, L, in the range
	  1 through 7, that this node performs transactions
	  for, 2 raised to (L - 1) is added to the sum.  For
	  example, a node which performs primarily routing
	  functions would have a value of 4 (2^(3-1)).	In
	  contrast, a node which is a host offering
	  application services would have a value of 72
	  (2^(4-1) + 2^(7-1)).	Note that in the context of
	  the Internet suite of protocols, values should be
	  calculated accordingly:

	       layer  functionality
	       1  physical (e.g., repeaters)
	       2  datalink/subnetwork (e.g., bridges)
	       3  internet (e.g., IP gateways)
	       4  end-to-end  (e.g., IP hosts)
	       7  applications (e.g., mail relays)

	  For systems including OSI protocols, layers 5 and
	  6 may also be counted."
     ::= { system 7 }

     -- the SNMP group

     -- Implementation of the SNMP group is mandatory for all
     -- systems which support an SNMP protocol entity.	Some of
     -- the objects defined below will be zero-valued in those
     -- SNMP implementations that are optimized to support only
     -- those functions specific to either a management agent or
     -- a management station.  In particular, it should be
     -- observed that the objects below refer to an SNMP entity,
     -- and there may be several SNMP entities residing on a
     -- managed node (e.g., if the node is hosting acting as
     -- a management station).

snmpInPkts OBJECT-TYPE
     SYNTAX  Counter
     ACCESS  read-only
     STATUS  mandatory
     DESCRIPTION
	  "The total number of Messages delivered to the
	  SNMP entity from the transport service."
     ::= { snmp 1 }

snmpOutPkts OBJECT-TYPE
     SYNTAX  Counter
     ACCESS  read-only
     STATUS  mandatory
     DESCRIPTION
	  "The total number of SNMP Messages which were
	  passed from the SNMP protocol entity to the
	  transport service."
     ::= { snmp 2 }

snmpInBadVersions OBJECT-TYPE
     SYNTAX  Counter
     ACCESS  read-only
     STATUS  mandatory
     DESCRIPTION
	  "The total number of SNMP Messages which were
	  delivered to the SNMP protocol entity and were for
	  an unsupported SNMP version."
     ::= { snmp 3 }

snmpInBadCommunityNames OBJECT-TYPE
     SYNTAX  Counter
     ACCESS  read-only
     STATUS  mandatory
     DESCRIPTION
	  "The total number of SNMP Messages delivered to
	  the SNMP protocol entity which used a SNMP
	  community name not known to said entity."
     ::= { snmp 4 }

snmpInBadCommunityUses OBJECT-TYPE
     SYNTAX  Counter
     ACCESS  read-only
     STATUS  mandatory
     DESCRIPTION
	  "The total number of SNMP Messages delivered to
	  the SNMP protocol entity which represented an SNMP
	  operation which was not allowed by the SNMP
	  community named in the Message."
     ::= { snmp 5 }

snmpInASNParseErrs OBJECT-TYPE
     SYNTAX  Counter
     ACCESS  read-only
     STATUS  mandatory
     DESCRIPTION
	  "The total number of ASN.1 or BER errors
	  encountered by the SNMP protocol entity when
	  decoding received SNMP Messages."
     ::= { snmp 6 }

     -- { snmp 7 } is not used

snmpInTooBigs OBJECT-TYPE
     SYNTAX  Counter
     ACCESS  read-only
     STATUS  mandatory
     DESCRIPTION
	  "The total number of SNMP PDUs which were
	  delivered to the SNMP protocol entity and for
	  which the value of the error-status field is
	  `tooBig'."
     ::= { snmp 8 }

snmpInNoSuchNames OBJECT-TYPE
     SYNTAX  Counter
     ACCESS  read-only
     STATUS  mandatory
     DESCRIPTION
	  "The total number of SNMP PDUs which were
	  delivered to the SNMP protocol entity and for
	  which the value of the error-status field is
	  `noSuchName'."
     ::= { snmp 9 }

snmpInBadValues OBJECT-TYPE
     SYNTAX  Counter
     ACCESS  read-only
     STATUS  mandatory
     DESCRIPTION
	  "The total number of SNMP PDUs which were
	  delivered to the SNMP protocol entity and for
	  which the value of the error-status field is
	  `badValue'."
     ::= { snmp 10 }

snmpInReadOnlys OBJECT-TYPE
     SYNTAX  Counter
     ACCESS  read-only
     STATUS  mandatory
     DESCRIPTION
	  "The total number valid SNMP PDUs which were
	  delivered to the SNMP protocol entity and for
	  which the value of the error-status field is
	  `readOnly'.  It should be noted that it is a
	  protocol error to generate an SNMP PDU which
	  contains the value `readOnly' in the error-status
	  field, as such this object is provided as a means
	  of detecting incorrect implementations of the
	  SNMP."
     ::= { snmp 11 }

snmpInGenErrs OBJECT-TYPE
     SYNTAX  Counter
     ACCESS  read-only
     STATUS  mandatory
     DESCRIPTION
	  "The total number of SNMP PDUs which were
	  delivered to the SNMP protocol entity and for
	  which the value of the error-status field is
	  `genErr'."
     ::= { snmp 12 }

snmpInTotalReqVars OBJECT-TYPE
     SYNTAX  Counter
     ACCESS  read-only
     STATUS  mandatory
     DESCRIPTION
	  "The total number of MIB objects which have been
	  retrieved successfully by the SNMP protocol entity
	  as the result of receiving valid SNMP Get-Request
	  and Get-Next PDUs."
     ::= { snmp 13 }

snmpInTotalSetVars OBJECT-TYPE
     SYNTAX  Counter
     ACCESS  read-only
     STATUS  mandatory
     DESCRIPTION
	  "The total number of MIB objects which have been
	  altered successfully by the SNMP protocol entity
	  as the result of receiving valid SNMP Set-Request
	  PDUs."
     ::= { snmp 14 }

snmpInGetRequests OBJECT-TYPE
     SYNTAX  Counter
     ACCESS  read-only
     STATUS  mandatory
     DESCRIPTION
	  "The total number of SNMP Get-Request PDUs which
	  have been accepted and processed by the SNMP
	  protocol entity."
     ::= { snmp 15 }

snmpInGetNexts OBJECT-TYPE
     SYNTAX  Counter
     ACCESS  read-only
     STATUS  mandatory
     DESCRIPTION
	  "The total number of SNMP Get-Next PDUs which have
	  been accepted and processed by the SNMP protocol
	  entity."
     ::= { snmp 16 }

snmpInSetRequests OBJECT-TYPE
     SYNTAX  Counter
     ACCESS  read-only
     STATUS  mandatory
     DESCRIPTION
	  "The total number of SNMP Set-Request PDUs which
	  have been accepted and processed by the SNMP
	  protocol entity."
     ::= { snmp 17 }

snmpInGetResponses OBJECT-TYPE
     SYNTAX  Counter
     ACCESS  read-only
     STATUS  mandatory
     DESCRIPTION
	  "The total number of SNMP Get-Response PDUs which
	  have been accepted and processed by the SNMP
	  protocol entity."
     ::= { snmp 18 }

snmpInTraps OBJECT-TYPE
     SYNTAX  Counter
     ACCESS  read-only
     STATUS  mandatory
     DESCRIPTION
	  "The total number of SNMP Trap PDUs which have
	  been accepted and processed by the SNMP protocol
	  entity."
     ::= { snmp 19 }

snmpOutTooBigs OBJECT-TYPE
     SYNTAX  Counter
     ACCESS  read-only
     STATUS  mandatory
     DESCRIPTION
	  "The total number of SNMP PDUs which were
	  generated by the SNMP protocol entity and for
	  which the value of the error-status field is
	  `tooBig.'"
     ::= { snmp 20 }

snmpOutNoSuchNames OBJECT-TYPE
     SYNTAX  Counter
     ACCESS  read-only
     STATUS  mandatory
     DESCRIPTION
	  "The total number of SNMP PDUs which were
	  generated by the SNMP protocol entity and for
	  which the value of the error-status is
	  `noSuchName'."
     ::= { snmp 21 }

snmpOutBadValues OBJECT-TYPE
     SYNTAX  Counter
     ACCESS  read-only
     STATUS  mandatory
     DESCRIPTION
	  "The total number of SNMP PDUs which were
	  generated by the SNMP protocol entity and for
	  which the value of the error-status field is
	  `badValue'."
     ::= { snmp 22 }

     -- { snmp 23 } is not used

snmpOutGenErrs OBJECT-TYPE
     SYNTAX  Counter
     ACCESS  read-only
     STATUS  mandatory
     DESCRIPTION
	  "The total number of SNMP PDUs which were
	  generated by the SNMP protocol entity and for
	  which the value of the error-status field is
	  `genErr'."
     ::= { snmp 24 }

snmpOutGetRequests OBJECT-TYPE
     SYNTAX  Counter
     ACCESS  read-only
     STATUS  mandatory
     DESCRIPTION
	  "The total number of SNMP Get-Request PDUs which
	  have been generated by the SNMP protocol entity."
     ::= { snmp 25 }

snmpOutGetNexts OBJECT-TYPE
     SYNTAX  Counter
     ACCESS  read-only
     STATUS  mandatory
     DESCRIPTION
	  "The total number of SNMP Get-Next PDUs which have
	  been generated by the SNMP protocol entity."
     ::= { snmp 26 }

snmpOutSetRequests OBJECT-TYPE
     SYNTAX  Counter
     ACCESS  read-only
     STATUS  mandatory
     DESCRIPTION
	  "The total number of SNMP Set-Request PDUs which
	  have been generated by the SNMP protocol entity."
     ::= { snmp 27 }

snmpOutGetResponses OBJECT-TYPE
     SYNTAX  Counter
     ACCESS  read-only
     STATUS  mandatory
     DESCRIPTION
	  "The total number of SNMP Get-Response PDUs which
	  have been generated by the SNMP protocol entity."
     ::= { snmp 28 }

snmpOutTraps OBJECT-TYPE
     SYNTAX  Counter
     ACCESS  read-only
     STATUS  mandatory
     DESCRIPTION
	  "The total number of SNMP Trap PDUs which have
	  been generated by the SNMP protocol entity."
     ::= { snmp 29 }

snmpEnableAuthenTraps OBJECT-TYPE
     SYNTAX  INTEGER { enabled(1), disabled(2) }
     ACCESS  read-write
     STATUS  mandatory
     DESCRIPTION
	  "Indicates whether the SNMP agent process is
	  permitted to generate authentication-failure
	  traps.  The value of this object overrides any
	  configuration information; as such, it provides a
	  means whereby all authentication-failure traps may
	  be disabled.

	  Note that it is strongly recommended that this
	  object be stored in non-volatile memory so that it
	  remains constant between re-initializations of the
	  network management system."
     ::= { snmp 30 }

coldStart TRAP-TYPE
     ENTERPRISE  snmp
     DESCRIPTION
	  "A coldStart trap signifies that the sending
	  protocol entity is reinitializing itself such
	  that the agent's configuration or the rotocol
	  entity implementation may be altered."
     ::= 0

warmStart TRAP-TYPE
     ENTERPRISE  snmp
     DESCRIPTION
	  "A warmStart trap signifies that the sending
	  protocol entity is reinitializing itself such
	  that neither the agent configuration nor the
	  protocol entity implementation is altered."
     ::= 1

authenticationFailure TRAP-TYPE
     ENTERPRISE  snmp
     DESCRIPTION
	  "An authenticationFailure trap signifies that
	  the sending protocol entity is the addressee
	  of a protocol message that is not properly
	  authenticated.  While implementations of the
	  SNMP must be capable of generating this trap,
	  they must also be capable of suppressing the
	  emission of such traps via an implementation-
	  specific mechanism."
     ::= 4

END


Erlang/OTP							       SNMP							   STANDARD-MIB(7)