hello solaris friends,
I've tried installing Sun Solaris 10.0, but everytime it seems to bypass the network config. screen that looks similar to this...here's the url:
http://www.hup.hu/old/images/hup/Solaris/Sol10beta7/9.png
I'm able to install it all the way through but I get no... (2 Replies)
...I haven't been here in along time!
Anyways, I didn't know where I should put this, as this involves practically three OSes, so if this is in the wrong place, feel free to move it.
Recently, I thought about this: installing OpenSUSE 10.1 on my Mac Mini's (Intel Core Duo) external hard... (0 Replies)
Hi folks,
I've searched as much as possible with regards to the installation of Solaris 10 and this error that I keep getting no matter which arguments I use.
sol-10-u9-ga-sparc-dvd.iso
sc> showhost
Sun-Fire-T2000 System Firmware 6.7.12 2011/07/06 20:03
Host flash versions:
OBP... (3 Replies)
Issue:
I am trying to install Vmware Server 2(VMware-server-2.0.2-203138.x86_64) installation on SUSE Linux Enterprise Server 11 (x86_64) SP2 and it fails with error:
None of the pre-built vmmon modules for VMware Server is suitable for your running kernel. Do you want this program to try... (3 Replies)
When I try to install wine either through yast or zypper it fails with below message:
zypper in wine
Refreshing service 'nu_novell_com'.
Loading repository data...
Reading installed packages...
Resolving package dependencies...
Problem: nothing provides libOSMesa.so.8()(64bit) needed by... (0 Replies)
Discussion started by: rupeshkp728
0 Replies
7. Post Here to Contact Site Administrators and Moderators
I am trying to install EEM on Linux but found with below issue
27 Sep 2013 01:10:41 INFO iGateway - Check if we can upgrade from Linux 2.4 to 2.6 installer
27 Sep 2013 01:10:41 INFO iGateway - iGateway components
conf, Spin.conf]
Please suggest, If any further information is required... (1 Reply)
Dear Guru,
I want to install sudo in my HPUX 11.11 and i also already downloading the software from website sudo, and already install the depot using swinstall -c .... , after finish still can not find sudo . something wrong with my installation ? thank you
# ls... (6 Replies)
what i should to do next? read full query first please!!
harshbhu@harshbhu:/usr/local/gg/10.6/updates/Source$ sudo ./install_software
sudo: unable to resolve host harshbhu
install_software version 2017/06/29
GAMIT and GLOBK to be installed into /usr/local/gg/10.6/updates/Source
If... (0 Replies)
Discussion started by: ankit lohar
0 Replies
LEARN ABOUT MINIX
fmthard
fmthard(1M)fmthard(1M)NAME
fmthard - populate label on hard disks
SYNOPSIS
SPARC
fmthard -d data | -n volume_name | -s datafile [-i] /dev/rdsk/c? [t?] d?s2
fmthard -d data | -n volume_name | -s datafile [-i] /dev/rdsk/c? [t?] d?s2
The fmthard command updates the VTOC (Volume Table of Contents) on hard disks and, on systems, adds boot information to the Solaris fdisk
partition. One or more of the options -s datafile, -d data, or -n volume_name must be used to request modifications to the disk label. To
print disk label contents, see prtvtoc(1M). The /dev/rdsk/c?[t?]d?s2 file must be the character special file of the device where the new
label is to be installed. On systems, fdisk(1M) must be run on the drive before fmthard.
If you are using an system, note that the term ``partition'' in this page refers to slices within the fdisk partition on machines. Do
not confuse the partitions created by fmthard with the partitions created by fdisk.
The following options are supported:
-d data The data argument of this option is a string representing the information for a particular partition in the current
VTOC. The string must be of the format part:tag:flag:start:size where part is the partition number, tag is the ID
TAG of the partition, flag is the set of permission flags, start is the starting sector number of the partition,
and size is the number of sectors in the partition. See the description of the datafile below for more information
on these fields.
-i This option allows the command to create the desired VTOC table, but prints the information to standard output
instead of modifying the VTOC on the disk.
-n volume_name This option is used to give the disk a volume_name up to 8 characters long.
-s datafile This option is used to populate the VTOC according to a datafile created by the user. If the datafile is "-",
fmthard reads from standard input. The datafile format is described below. This option causes all of the disk par-
tition timestamp fields to be set to zero.
Every VTOC generated by fmthard will also have partition 2, by convention, that corresponds to the whole disk. If
the input in datafile does not specify an entry for partition 2, a default partition 2 entry will be created auto-
matically in VTOC with the tag V_BACKUP and size equal to the full size of the disk.
The datafile contains one specification line for each partition, starting with partition 0. Each line is delimited
by a new-line character (
). If the first character of a line is an asterisk (*), the line is treated as a com-
ment. Each line is composed of entries that are position-dependent, separated by "white space" and having the fol-
lowing format:
partition tag flag starting_sector size_in_sectors
where the entries have the following values:
partition The partition number. Currently, for Solaris SPARC, a disk can have up to 8 partitions, 0-7. Even
though the partition field has 4 bits, only 3 bits are currently used. For , all 4 bits are used to
allow slices 0-15. Each Solaris fdisk partition can have up to 16 slices.
tag The partition tag: a decimal number. The following are reserved codes: 0 (V_UNASSIGNED), 1
(V_BOOT), 2 (V_ROOT), 3 (V_SWAP), 4 (V_USR), 5 (V_BACKUP), 6 (V_STAND), 7 (V_VAR), and 8 (V_HOME).
flag The flag allows a partition to be flagged as unmountable or read only, the masks being: V_UNMNT
0x01, and V_RONLY 0x10. For mountable partitions use 0x00.
starting_sector The sector number (decimal) on which the partition starts.
size_in_sectors The number (decimal) of sectors occupied by the partition.
You can save the output of a prtvtoc command to a file, edit the file, and use it as the datafile argument to the
-s option.
See attributes(5) for descriptions of the following attributes:
+-----------------------------+-----------------------------+
| ATTRIBUTE TYPE | ATTRIBUTE VALUE |
+-----------------------------+-----------------------------+
|Availability |SUNWcsu |
+-----------------------------+-----------------------------+
uname(1), format(1M), prtvtoc(1M), attributes(5)
Only
fdisk(1M), installgrub(1M)
Special care should be exercised when overwriting an existing VTOC, as incorrect entries could result in current data being inaccessible.
As a precaution, save the old VTOC.
For disks under one terabyte, fmthard cannot write a VTOC on an unlabeled disk. Use format(1M) for this purpose.
11 Apr 2005 fmthard(1M)