Sponsored Content
Full Discussion: SNMP Monitoring
Special Forums UNIX and Linux Applications Infrastructure Monitoring SNMP Monitoring Post 302670379 by Paulwintech on Thursday 12th of July 2012 04:14:31 AM
Old 07-12-2012
SNMP Monitoring

Hi,

I have below IP address configured in my server. Recently i installed SNMP in Linux 64x bit. While checking the snmp using snmpwalk i get Time out error for all IP except loopback IP(127.0.0.1).

How to make all my IPs listen to SNMP

eth0
BOOTPROTO=static
DEVICE=eth0
IPADDR=192.168.100.126
NETMASK=255.255.255.0
ONBOOT=yes

eth0:0
DEVICE=eth0:0
IPADDR=192.168.100.248
NETMASK=255.255.255.255
ONBOOT=yes

eth0:1
DEVICE=eth0:1
IPADDR=192.168.100.251
NETMASK=255.255.255.255
ONBOOT=yes

eth1
DEVICE=eth1
IPADDR=10.236.108.83
ONBOOT=no
NETMASK=255.255.255.192


Regards
Paulwintech
 

10 More Discussions You Might Find Interesting

1. UNIX for Advanced & Expert Users

Monitoring CPU usage on AIX 5.3 with SNMP

Hi I would like to monitor CPU usage ( %) , memory utilization and such on an AIX 5.3 with snmp. How would I do that ? :confused: If I do "snmpwalk -c public -v1 hosttomonitor" I get nothing about the CPU. I've done this on Linux ( not much trouble doing it on linux ) but I'm having a hard... (2 Replies)
Discussion started by: art
2 Replies

2. AIX

monitoring process list via snmp, hrSWRun

hello, i'd like to evaluate the process list of an AXI 5.3 system via snmpv3. The problem is, that there's no data below the specified branches: 1.3.6.1.2.1.25.4 / .5 in /etc/mib.defs it is defined as hrSWRun / hrSWRunPerf The user's viewgroup is iso. (1.). A snmpwalk through... (0 Replies)
Discussion started by: Bzubi
0 Replies

3. Infrastructure Monitoring

Monitoring CPU Usage with SNMP

Can someone please tell me how to calculate the CPU usage from what one gets back from snmpwalk? I have searched and dug through the internet and apparently, no one has the answer to this? i can use snmpwalk to pull out relevant information about cpu. but i have no clue what values are to be... (1 Reply)
Discussion started by: SkySmart
1 Replies

4. Infrastructure Monitoring

temp monitoring via SNMP

Hi, I am trying to monitor temperature of telecom devices of avaya and polycom. I have setup SNMP. can somebody help me to know what are the requirements to have a SNMP command working for this thanks in advance (1 Reply)
Discussion started by: Subhash Chauhan
1 Replies

5. Shell Programming and Scripting

Snmp Process Monitoring Issue

Can someone please explain to me how come snmpwalk doesn't always find a running process that's on a remote server? I prefer to use snmp to monitor processes remotely because this doesn't require me to put a script on that remote box. but the problem is, there are times that my snmp command... (2 Replies)
Discussion started by: SkySmart
2 Replies

6. IP Networking

Sending data from DELL OMSA SNMP and Custom SNMP MIB to same UDP port 161

Hi , Currently DELL OMSA SNMP sends data through default udp port 161.I want my custom SNMP MIB also to send data in the same udp port 161.Whether its possible.If yes where to configure .I tried starting my custom MIB in udp port 161,but it throws port already in use.Kindly guide. (0 Replies)
Discussion started by: prabakar4all
0 Replies

7. Red Hat

Sending data from DELL OMSA SNMP and Custom SNMP MIB to same UDP port 161

Hi , Currently DELL OMSA SNMP sends data through default udp port 161.I want my custom SNMP MIB also to send data in the same udp port 161.Whether its possible.If yes where to configure .I tried starting my custom MIB in udp port 161,but it throws port already in use.Kindly guide. (1 Reply)
Discussion started by: prabakar4all
1 Replies

8. IP Networking

SNMP Problem - SNMP not getting to the agent.

I am having a problem with an SNMP event, and I am not sure where I should be looking to solve this problem. Description: There is an SNMP event in our system that for one reason or another is not getting sent out as an email because it is never getting to our SNMP agent. I see where the... (0 Replies)
Discussion started by: broberts
0 Replies

9. Infrastructure Monitoring

SNMP traps to SNMP server

Dear Champs, I am new to unix, and need to configure linux server to send below traps to a SNMP server. Monitoring TRAP Disk Space Low Monitoring TRAP Memory Low Monitoring TRAP CPU high Monitoring TRAP Admin login/Logoff Please help me how to send this information to my SNMP server... (2 Replies)
Discussion started by: stavar
2 Replies

10. UNIX for Dummies Questions & Answers

Need to transfer all kernel logs (var/log/messages) to the snmp listener as snmp trap

i am working with embedded system -Dell DCS management sub system. my question is as below: currently we are using linux kernel 2.6.30 build and we have a kernel logs stored to the /var/log/messages path. now we have to transfer all this logs to the specified SNMP target as a part of SNMP... (4 Replies)
Discussion started by: vipul_prajapati
4 Replies
netmasks(4)                                                        File Formats                                                        netmasks(4)

NAME
netmasks - network mask database SYNOPSIS
/etc/inet/netmasks /etc/netmasks DESCRIPTION
The netmasks file contains network masks used to implement IP subnetting. It supports both standard subnetting as specified in RFC-950 and variable length subnetting as specified in RFC-1519. When using standard subnetting there should be a single line for each network that is subnetted in this file with the network number, any number of SPACE or TAB characters, and the network mask to use on that network. Network numbers and masks may be specified in the conventional IP `.' (dot) notation (like IP host addresses, but with zeroes for the host part). For example, 128.32.0.0 255.255.255.0 can be used to specify that the Class B network 128.32.0.0 should have eight bits of subnet field and eight bits of host field, in addition to the standard sixteen bits in the network field. When using variable length subnetting, the format is identical. However, there should be a line for each subnet with the first field being the subnet and the second field being the netmask that applies to that subnet. The users of the database, such as ifconfig(1M), perform a lookup to find the longest possible matching mask. It is possible to combine the RFC-950 and RFC-1519 form of subnet masks in the net- masks file. For example, 128.32.0.0 255.255.255.0 128.32.27.0 255.255.255.240 128.32.27.16 255.255.255.240 128.32.27.32 255.255.255.240 128.32.27.48 255.255.255.240 128.32.27.64 255.255.255.240 128.32.27.80 255.255.255.240 128.32.27.96 255.255.255.240 128.32.27.112 255.255.255.240 128.32.27.128 255.255.255.240 128.32.27.144 255.255.255.240 128.32.27.160 255.255.255.240 128.32.27.176 255.255.255.240 128.32.27.192 255.255.255.240 128.32.27.208 255.255.255.240 128.32.27.224 255.255.255.240 128.32.27.240 255.255.255.240 128.32.64.0 255.255.255.192 can be used to specify different netmasks in different parts of the 128.32.0.0 Class B network number. Addresses 128.32.27.0 through 128.32.27.255 have a subnet mask with 28 bits in the combined network and subnet fields (often referred to as the subnet field) and 4 bits in the host field. Furthermore, addresses 128.32.64.0 through 128.32.64.63 have a 26 bits in the subnet field. Finally, all other addresses in the range 128.32.0.0 through 128.32.255.255 have a 24 bit subnet field. Invalid entries are ignored. SEE ALSO
ifconfig(1M), inet(7P) Postel, Jon, and Mogul, Jeff, Internet Standard Subnetting Procedure, RFC 950, Network Information Center, SRI International, Menlo Park, Calif., August 1985. V. Fuller, T. Li, J. Yu, K. Varadhan, Classless Inter-Domain Routing (CIDR): an Address Assignment and Aggregation Strategy, RFC 1519, Network Information Center, SRI International, Menlo Park, Calif., September 1993. T. Pummill, B. Manning, Variable Length Subnet Table For IPv4, RFC 1878, Network Information Center, SRI International, Menlo Park, Calif., December 1995. NOTES
/etc/inet/netmasks is the official SVr4 name of the netmasks file. The symbolic link /etc/netmasks exists for BSD compatibility. SunOS 5.10 7 Jan 1997 netmasks(4)
All times are GMT -4. The time now is 03:02 PM.
Unix & Linux Forums Content Copyright 1993-2022. All Rights Reserved.
Privacy Policy