06-25-2012
Hi bartus11
As you said I tried to create a zone in zpool but still zone is getting created with UFS root FS. Please find the below logs:
Code :
bash-3.2#
bash-3.2#
bash-3.2#
bash-3.2# df -h
Filesystem size used avail capacity Mounted on
/dev/dsk/c1t0d0s0 7.8G 4.5G 3.2G 59% /
/devices 0K 0K 0K 0% /devices
ctfs 0K 0K 0K 0% /system/contract
proc 0K 0K 0K 0% /proc
mnttab 0K 0K 0K 0% /etc/mnttab
swap 783M 968K 782M 1% /etc/svc/volatile
objfs 0K 0K 0K 0% /system/object
sharefs 0K 0K 0K 0% /etc/dfs/sharetab
/usr/lib/libc/libc_hwcap1.so.1
7.8G 4.5G 3.2G 59% /lib/libc.so.1
fd 0K 0K 0K 0% /dev/fd
swap 782M 40K 782M 1% /tmp
swap 782M 32K 782M 1% /var/run
/dev/dsk/c1t0d0s7 3.5G 3.6M 3.5G 1% /export/home
rootpool 16G 44K 9.6G 1% /rootpool
bash-3.2#
bash-3.2#
bash-3.2#
bash-3.2#
bash-3.2#
bash-3.2#
bash-3.2#
bash-3.2#
bash-3.2# echo |format
Searching for disks...done
AVAILABLE DISK SELECTIONS:
0. c1t0d0 <DEFAULT cyl 1563 alt 2 hd 255 sec 63>
/pci@0,0/pci15ad,1976@10/sd@0,0
1. c1t1d0 <DEFAULT cyl 2085 alt 2 hd 255 sec 63>
/pci@0,0/pci15ad,1976@10/sd@1,0
2. c1t2d0 <DEFAULT cyl 4093 alt 2 hd 128 sec 32>
/pci@0,0/pci15ad,1976@10/sd@2,0
Specify disk (enter its number): Specify disk (enter its number):
bash-3.2#
bash-3.2# zpool status
pool: rootpool
state: ONLINE
scan: none requested
config:
NAME STATE READ WRITE CKSUM
rootpool ONLINE 0 0 0
c1t1d0s0 ONLINE 0 0 0
errors: No known data errors
bash-3.2#
bash-3.2#
bash-3.2#
bash-3.2# zpool create pool1 c1t2d0
bash-3.2#
bash-3.2# zpool status
pool: pool1
state: ONLINE
scan: none requested
config:
NAME STATE READ WRITE CKSUM
pool1 ONLINE 0 0 0
c1t2d0 ONLINE 0 0 0
errors: No known data errors
pool: rootpool
state: ONLINE
scan: none requested
config:
NAME STATE READ WRITE CKSUM
rootpool ONLINE 0 0 0
c1t1d0s0 ONLINE 0 0 0
errors: No known data errors
bash-3.2#
bash-3.2# zfs create pool1/fs1
bash-3.2#
bash-3.2# zfs list
NAME USED AVAIL REFER MOUNTPOINT
pool1 131K 7.81G 31K /pool1
pool1/fs1 31K 7.81G 31K /pool1/fs1
rootpool 5.98G 9.64G 44K /rootpool
rootpool/ROOT 4.96G 9.64G 31K legacy
rootpool/ROOT/zfsBE 66.3M 9.64G 4.62G /tmp/.liveupgrade.281.471/lu_zone_update.471
rootpool/ROOT/zfsBE/var 592K 9.64G 86.2M /tmp/.liveupgrade.281.471/lu_zone_update.471/var
rootpool/ROOT/zfsBE2 4.90G 9.64G 4.62G /
rootpool/ROOT/zfsBE2@zfsBE2 188M - 4.62G -
rootpool/ROOT/zfsBE2/var 91.7M 9.64G 86.8M /var
rootpool/ROOT/zfsBE2/var@zfsBE2 4.96M - 86.2M -
rootpool/dump 512M 9.64G 512M -
rootpool/swap 535M 10.2G 6.10M -
bash-3.2#
bash-3.2#
bash-3.2#
bash-3.2# zpool list
NAME SIZE ALLOC FREE CAP HEALTH ALTROOT
pool1 7.94G 182K 7.94G 0% ONLINE -
rootpool 15.9G 5.47G 10.4G 34% ONLINE -
bash-3.2#
bash-3.2#
bash-3.2#
bash-3.2# zonecfg -z zone3
zone3: No such zone configured
Use 'create' to begin configuring a new zone.
zonecfg:zone3> create
zonecfg:zone3> set autoboot=true
zonecfg:zone3> set zonepath=/pool1/fs1/zone3
zonecfg:zone3> add net
zonecfg:zone3:net> set physical=hme0
zonecfg:zone3:net> set address=192.168.1.140
zonecfg:zone3:net> end
zonecfg:zone3> verify
zonecfg:zone3> commit
zonecfg:zone3> exit
bash-3.2#
bash-3.2#
bash-3.2# zoneadm list -cv
ID NAME STATUS PATH BRAND IP
0 global running / native shared
1 zone1 running /export/zone1 native shared
- zone3 configured /pool1/fs1/zone3 native shared
bash-3.2# mkdir /pool1/fs1/zone3
bash-3.2# chmod 700 /pool1/fs1/zone3
bash-3.2# zoneadm -z zone3 verify
bash-3.2#
bash-3.2# zoneadm -z zone3 install
A ZFS file system has been created for this zone.
Preparing to install zone <zone3>.
Creating list of files to copy from the global zone.
Copying <2883> files to the zone.
Initializing zone product registry.
Determining zone package initialization order.
Preparing to initialize <1111> packages on the zone.
Initializing package <0> of <1111>: percent complete: 0%
Initializing package <1> of <1111>: percent complete: 0%
Initializing package <2> of <1111>: percent complete: 0%
Initializing package <3> of <1111>: percent complete: 0%
Initializing package <4> of <1111>: percent complete: 0%
Initializing package <5> of <1111>: percent complete: 0%
Initializing package <6> of <1111>: percent complete: 0%
Initializing package <7> of <1111>: percent complete: 0%
.....
.....
.....
Initializing package <1109> of <1111>: percent complete: 99%
Initializing package <1110> of <1111>: percent complete: 99%
Initialized <1111> packages on zone.
Zone <zone3> is initialized.
The file </pool1/fs1/zone3/root/var/sadm/system/logs/install_log> contains a log of the zone installation.
bash-3.2#
bash-3.2#
bash-3.2# zoneadm list -cv
ID NAME STATUS PATH BRAND IP
0 global running / native shared
1 zone1 running /export/zone1 native shared
- zone3 installed /pool1/fs1/zone3 native shared
bash-3.2# zoneadm -z zone3 boot
bash-3.2#
bash-3.2# zoneadm list -cv
ID NAME STATUS PATH BRAND IP
0 global running / native shared
1 zone1 running /export/zone1 native shared
2 zone3 running /pool1/fs1/zone3 native shared
bash-3.2#
bash-3.2# zlogin zone3
[Connected to zone 'zone3' pts/3]
Oracle Corporation SunOS 5.10 Generic Patch January 2005
# df -h
Filesystem size used avail capacity Mounted on
/ 7.8G 106M 7.7G 2% /
/dev 7.8G 106M 7.7G 2% /dev
/lib 7.8G 4.5G 3.2G 59% /lib
/platform 7.8G 4.5G 3.2G 59% /platform
/sbin 7.8G 4.5G 3.2G 59% /sbin
/usr 7.8G 4.5G 3.2G 59% /usr
proc 0K 0K 0K 0% /proc
ctfs 0K 0K 0K 0% /system/contract
mnttab 0K 0K 0K 0% /etc/mnttab
objfs 0K 0K 0K 0% /system/object
swap 478M 292K 478M 1% /etc/svc/volatile
/usr/lib/libc/libc_hwcap1.so.1
7.8G 4.5G 3.2G 59% /lib/libc.so.1
fd 0K 0K 0K 0% /dev/fd
swap 478M 4K 478M 1% /tmp
swap 478M 4K 478M 1% /var/run
#
#
[Connection to zone 'zone3' pts/3 closed]
bash-3.2#
bash-3.2#
bash-3.2#
bash-3.2# zlogin zone3
[Connected to zone 'zone3' pts/3]
Last login: Mon Jun 25 11:42:21 on pts/3
Oracle Corporation SunOS 5.10 Generic Patch January 2005
#
# zpool status
no pools available
#
# df -h
Filesystem size used avail capacity Mounted on
/ 7.8G 106M 7.7G 2% /
/dev 7.8G 106M 7.7G 2% /dev
/lib 7.8G 4.5G 3.2G 59% /lib
/platform 7.8G 4.5G 3.2G 59% /platform
/sbin 7.8G 4.5G 3.2G 59% /sbin
/usr 7.8G 4.5G 3.2G 59% /usr
proc 0K 0K 0K 0% /proc
ctfs 0K 0K 0K 0% /system/contract
mnttab 0K 0K 0K 0% /etc/mnttab
objfs 0K 0K 0K 0% /system/object
swap 480M 292K 480M 1% /etc/svc/volatile
/usr/lib/libc/libc_hwcap1.so.1
7.8G 4.5G 3.2G 59% /lib/libc.so.1
fd 0K 0K 0K 0% /dev/fd
swap 480M 4K 480M 1% /tmp
swap 480M 4K 480M 1% /var/run
#
[Connection to zone 'zone3' pts/3 closed]
bash-3.2#
bash-3.2#
bash-3.2# zlogin -C zone3
[Connected to zone 'zone3' console]
You did not enter a selection.
What type of terminal are you using?
1) ANSI Standard CRT
2) DEC VT52
3) DEC VT100
4) Heathkit 19
5) Lear Siegler ADM31
6) PC Console
7) Sun Command Tool
8) Sun Workstation
9) Televideo 910
10) Televideo 925
11) Wyse Model 50
12) X Terminal Emulator (xterms)
13) CDE Terminal Emulator (dtterm)
14) Other
Type the number of your choice and press Return: 1
Creating new rsa public/private host key pair
Creating new dsa public/private host key pair
Configuring network interface addresses:.
- Host Name --------------------------------------------------------------------
Enter the host name which identifies this system on the network. The name
must be unique within your domain; creating a duplicate host name will cause
problems on the network after you install Solaris.
A host name must have at least one character; it can contain letters,
digits, and minus signs (-).Host name
-------------------------------------------------------------------------------- Esc-2_Continue Esc-6_Helpsunzonesunzonesunzone
> Press F2 to go to the next screen.
Esc-2_Continue Esc-6_Help
Esc-2_Continue Esc-6_Helpsunzone
- Confirm Information ----------------------------------------------------------
> Confirm the following information. If it is correct, press F2;
to change any information, press F4.Host name: sunzone
-------------------------------------------------------------------------------- Esc-2_Continue Esc-4_Change Esc-6_Help
Esc-2_Continue Esc-4_Change Esc-6_Help
Just a moment...
- Time Zone --------------------------------------------------------------------
On this screen you must specify your default time zone. You can specify a
time zone in three ways: select one of the continents or oceans from the
list, select other - offset from GMT, or other - specify time zone file.
> To make a selection, use the arrow keys to highlight the option and
press Return to mark it [X].Continents and Oceans
----------------------------------
- [ ] Africa
| [ ] Americas
| [ ] Antarctica
| [ ] Arctic Ocean
| [ ] Asia
| [ ] Atlantic Ocean
| [ ] Australia
| [ ] Europe
v [ ] Indian Ocean
-------------------------------------------------------------------------------- Esc-2_Continue Esc-6_Help[[[[
Esc-2_Continue Esc-6_Help- Country or Region ------------------------------------------------------------
> To make a selection, use the arrow keys to highlight the option and
press Return to mark it [X].Countries and Regions
------------------------
- [ ] Afghanistan
| [ ] Armenia
| [ ] Azerbaijan
| [ ] Bahrain
| [ ] Bangladesh
| [ ] Bhutan
| [ ] Brunei
| [ ] Cambodia
| [ ] China
| [ ] Cyprus
| [ ] East Timor
| [ ] Georgia
v [ ] Hong Kong
-------------------------------------------------------------------------------- Esc-2_Continue Esc-6_Help[[[[[[[[[[[[^rmenia
zerbaijan
Bahrain
ngladesh
hutan
runei
Cambodia
hyprus
East Timor
Georgia
Hong Kong
India
Esc-2_Continue Esc-6_Help- Confirm Information ----------------------------------------------------------
> Confirm the following information. If it is correct, press F2;
to change any information, press F4.Time zone: Asia/Calcutta
-------------------------------------------------------------------------------- Esc-2_Continue Esc-4_Change Esc-6_Help
Esc-2_Continue Esc-4_Change Esc-6_Help
Please wait...
- Root Password ----------------------------------------------------------------
Please enter the root password for this system.
The root password may contain alphanumeric and special characters. For
security, the password will not be displayed on the screen as you type it.
> If you do not want a root password, leave both entries blank.Root password:
Root password:
-------------------------------------------------------------------------------- Esc-2_Continue Esc-6_Help****
Esc-2_Continue Esc-6_Help****
Esc-2_Continue Esc-6_****
rebooting system due to change(s) in /etc/default/init
[NOTICE: Zone rebooting]
SunOS Release 5.10 Version Generic_147441-01 64-bit
Copyright (c) 1983, 2011, Oracle and/or its affiliates. All rights reserved.
Hostname: sunzone
sunzone console login: root
Password:
Last login: Tue Jun 26 00:13:08 on pts/3
Jun 26 00:15:15 sunzone login: ROOT LOGIN /dev/console
Oracle Corporation SunOS 5.10 Generic Patch January 2005
# df -h
Filesystem size used avail capacity Mounted on
/ 7.8G 106M 7.7G 2% /
/dev 7.8G 106M 7.7G 2% /dev
/lib 7.8G 4.5G 3.2G 59% /lib
/platform 7.8G 4.5G 3.2G 59% /platform
/sbin 7.8G 4.5G 3.2G 59% /sbin
/usr 7.8G 4.5G 3.2G 59% /usr
proc 0K 0K 0K 0% /proc
ctfs 0K 0K 0K 0% /system/contract
mnttab 0K 0K 0K 0% /etc/mnttab
objfs 0K 0K 0K 0% /system/object
swap 401M 304K 400M 1% /etc/svc/volatile
/usr/lib/libc/libc_hwcap1.so.1
7.8G 4.5G 3.2G 59% /lib/libc.so.1
fd 0K 0K 0K 0% /dev/fd
swap 400M 36K 400M 1% /tmp
swap 400M 16K 400M 1% /var/run
#
sunzone console login: ~.
Password:
Login incorrect
sunzone console login: ~.
[Connection to zone 'zone3' console closed]
bash-3.2#
bash-3.2#
bash-3.2#
bash-3.2#
bash-3.2#
bash-3.2#
bash-3.2#
Please let me know where I went wrong
8 More Discussions You Might Find Interesting
1. HP-UX
I won't to remove a filesystem /dev/vg01/lvo1 and copy the same to different vg ex:- /dev/vg02.
Pls give the required step to be followed to complete the said process (3 Replies)
Discussion started by: kamlesh_k
3 Replies
2. UNIX for Dummies Questions & Answers
Hi,
I try add a new file system:
#zfs create dsk1/mqm
it came back with:
#cannot create 'dsk1/mqm': no such pool 'dsk1'
what do I have to do?
Kind regards
Mehrdad (2 Replies)
Discussion started by: mehrdad68
2 Replies
3. Solaris
Hi,
I have Solaris-10 (Update-7). This is having ZFS file-system and 10 sparse-root zones are there. I want to install Solaris-10 recommended patch cluster on it, but not sure, how to go ahead with procedure. I want to patch one side of the mirror and keep intact another side safe in case of... (6 Replies)
Discussion started by: solaris_1977
6 Replies
4. Emergency UNIX and Linux Support
Hi All,
I have Solaris-10 configured with two non-global zones. All file-systems are mounted on global zone and data file-systems are mounted on non-global zone as lofs.
I have added 4 luns of 100 GB each and still not able to extend a file-system. This is production server, so I can not... (5 Replies)
Discussion started by: solaris_1977
5 Replies
5. Solaris
Hi All
After downloading ZFS documentation from oracle site, I am able to successfully migrate UFS root FS without zones to ZFS root FS. But in case of UFS root file system with zones , I am successfully able to migrate global zone to zfs root file system but zone are still in UFS root file... (2 Replies)
Discussion started by: sb200
2 Replies
6. Shell Programming and Scripting
Hi,
I have a directory having so many number of files. Now I want to move the files which are older than one month (lets say) from this directory to another directory (say BKP dir).
Simply, if file is olderthan one month move it from source1 dir to BKP1 dir.
My file names doesn't have... (7 Replies)
Discussion started by: karumudi7
7 Replies
7. UNIX for Dummies Questions & Answers
We are currently using the famous script H2N to create our DNS zone files from a host file. However, we are moving to IPV6 soon and this script doesnt support IPV6. Is there another script/solution to creating DNS zones via a host file input? (0 Replies)
Discussion started by: jpolachak
0 Replies
8. Solaris
We are currently using the famous script H2N to create our DNS zone files from a host file. However, we are moving to IPV6 soon and this script doesnt support IPV6. Is there another script/solution to creating DNS zones via a host file input? Is there another solution or way to do things that I may... (0 Replies)
Discussion started by: jpolachak
0 Replies