I am trying to change an IP address on a machine running HPUX10
After I change it I can ping it from the outside but it completely locks the console. After a reboot it returns back to its previous IP. Any ideas??
Thanks
Brian (7 Replies)
I know that I could use the
#ifconfig hme0 plumb
to activate the network interface.
However, how can I know the name of the interface e.g. hme0 before I could use the ifconfig to plumb it up?
I know there is a command (but I forgot it) to use in the Sparc version when you are in the... (7 Replies)
why the ifconfig command is not working in my machine?
it says "-bash: ifconfig: command not found"
why its says that?
actually i m looking for "how can I know the Network Interface Card physical address?"
Requesting u all for help.
thanks (3 Replies)
Hello everyone.
Im using last redhat enterprise edition and in my working environment, i'm always reconfiguring both interfaces , eth0 and eth1, everytime i change any interface, (i use ifconfig to change ip, and after i execute "/etc/init.d/network restart") my "/etc/hosts" file... (9 Replies)
its a fresh installation. during the OS setup, it did not prompt for IP, netmask and gateway. using Solaris 10 08/07 update 4. I tried to plumb manually but encountered no such interface error. but nxge interfaces can be greped from the /etc/path_to_inst file.
getting similar error on... (3 Replies)
Hi All,
I need some info on ifconfig.
ifconfig is available in Linux and Solaris. However the options available in Solaris is not there in Linux.
1. ifconfig -a == output is different in both OS. I am somewhat able to compare the output. But one thing I am not getting is after the flags... (2 Replies)
Unable to run the ifconfig in my home dir..
I did add adding /sbin and /usr/sbin in th PATH
But still unable to get that ..
Am using red hat linux
cat /etc/redhat-release
Red Hat Enterprise Linux Server release 5.3 (Tikanga) (3 Replies)
What would be the command to remove the IP address from an interface?
I want to remove the ip from this interface:
ce3: flags=1000803<UP,BROADCAST,MULTICAST,IPv4> mtu 1500 index 5
inet 155.216.13.74 netmask fffffff0 broadcast 155.216.13.79
ether 0:3:ba:da:a6:96 (3 Replies)
Hiii folks,,
I am unable to configure NIC using hme0 command. I am getting an error message as "hme0: File or directory not found.."
can someone help me...
Bhagi... (9 Replies)
Discussion started by: bhargav90
9 Replies
LEARN ABOUT XFREE86
reboot
reboot(1M)reboot(1M)NAME
reboot - restart the operating system
SYNOPSIS
/usr/sbin/reboot [-dlnq] [boot_arguments]
The reboot utility restarts the kernel. The kernel is loaded into memory by the PROM monitor, which transfers control to the loaded kernel.
Although reboot can be run by the super-user at any time, shutdown(1M) is normally used first to warn all users logged in of the impending
loss of service. See shutdown(1M) for details.
The reboot utility performs a sync(1M) operation on the disks, and then a multi-user reboot is initiated. See init(1M) for details. On
systems, reboot may also update the boot archive as needed to ensure a successful reboot.
The reboot utility normally logs the reboot to the system log daemon, syslogd(1M), and places a shutdown record in the login accounting
file /var/adm/wtmpx. These actions are inhibited if the -n or -q options are present.
Normally, the system reboots itself at power-up or after crashes.
The following options are supported:
-d Force a system crash dump before rebooting. See dumpadm(1M) for information on configuring system crash dumps.
-l Suppress sending a message to the system log daemon, syslogd(1M) about who executed reboot.
-n Avoid calling sync(2) and do not log the reboot to syslogd(1M) or to /var/adm/wtmpx. The kernel still attempts to sync
filesystems prior to reboot, except if the -d option is also present. If -d is used with -n, the kernel does not attempt to
sync filesystems.
-q Quick. Reboot quickly and ungracefully, without shutting down running processes first.
The following operands are supported:
boot_arguments An optional boot_arguments specifies arguments to the uadmin(2) function that are passed to the boot program and kernel
upon restart. The form and list of arguments is described in the boot(1M) and kernel(1M) man pages.. If the arguments are
specified, whitespace between them is replaced by single spaces unless the whitespace is quoted for the shell. If the
boot_arguments begin with a hyphen, they must be preceded by the -- delimiter (two hyphens) to denote the end of the reboot
argument list.
Example 1: Passing the -r and -v Arguments to boot
In the following example, the delimiter -- (two hyphens) must be used to separate the options of reboot from the arguments of boot(1M).
example# reboot -dl -- -rv
Example 2: Rebooting Using a Specific Disk and Kernel
The following example reboots using a specific disk and kernel.
example# reboot disk1 kernel.test/unix
/var/adm/wtmpx login accounting file
See attributes(5) for descriptions of the following attributes:
+-----------------------------+-----------------------------+
| ATTRIBUTE TYPE | ATTRIBUTE VALUE |
+-----------------------------+-----------------------------+
|Availability |SUNWcsu |
+-----------------------------+-----------------------------+
mdb(1), boot(1M), dumpadm(1M), fsck(1M), halt(1M), init(1M), kernel(1M), shutdown(1M), sync(1M), syslogd(1M), sync(2), uadmin(2),
reboot(3C), attributes(5)
The reboot utility does not execute the scripts in /etc/rcnum.d or execute shutdown actions in inittab(4). To ensure a complete shutdown
of system services, use shutdown(1M) or init(1M) to reboot a Solaris system.
11 Apr 2005 reboot(1M)