Sponsored Content
Operating Systems Solaris Solaris 9 zone wont boot - interface in use Post 302652465 by hicksd8 on Thursday 7th of June 2012 07:57:52 AM
Old 06-07-2012
Apologies if I'm about to state the obvious stuff that you already know but let's cover a few facts here.............

The branded zone can share a network interface with the global zone or it can be configured to have exclusive use of an interface. It would seem that whatever interface the branded zone is requesting at boot time, it is requesting exclusivity and the global zone is already using it so an error results.

I would suggest that you use zonecfg to list what interfaces the global and branded zones think you've got and reconfigure to eliminate conflict.

Another thought is that Solaris decides what interfaces to configure by the existence of /etc/hostname.<interface> files (eg. /etc/hostname.nxge0).

You haven't said whether your branded zone is on its own filesystem or not but if you can get at it then look for these file(s). Renaming them temporarily should stop Solaris trying to configure the network interfaces and therefore get the system on its feet. (Easier to troubleshoot once the system is up???) You could also look at /etc/hostname.<interface> files on the global and see what that thinks its got.

Hope that helps.

---------- Post updated at 12:57 PM ---------- Previous update was at 12:21 PM ----------

Also, you didn't say how you got into this position. What command(s) did you use to try and configure the interfaces?

If you think that you messed up your zone configuration you could try restoring everything under /etc/zones on global. This will put your zone config back to the way it was. (Rename the existing zones directory, don't delete anything)
This User Gave Thanks to hicksd8 For This Post:
 

9 More Discussions You Might Find Interesting

1. UNIX for Dummies Questions & Answers

New Sparc box wont boot. Keyboard?

Do I HAVE to have a Sun Sparc type keyboard? Ive got an Ultra Sparc workstation I got from EBAY that was supposted to be working. This box has a PS2 AND Sparc's odd looking keyboard port. Does my system have a switch in the BIOS simmilar to the x86 "Halt on keyboard error?" ...Or maybe a... (5 Replies)
Discussion started by: Curt
5 Replies

2. HP-UX

Wont boot

I am new to HP-UX. I have a external SCSI drive with HP-UX on it. I was trying to clone it to another external scsi drive. I added the new drive to existing LVM. Then I used dd command. But it failed with I/O error. Now I cannot boot it from original drive. It's saying panic: LVM: Configuration... (11 Replies)
Discussion started by: forhad
11 Replies

3. Solaris

Configuring interface in zone

Hi All, Please help me in configuring interface in zone I've zone with dedicated interface and I want this interface to get up with global system boot. I am struggling with IP, as always after reboot interface is not getting up automatically and I understand the reason for that.... (10 Replies)
Discussion started by: kumarmani
10 Replies

4. Solaris

Command line Interface or GUI Interface not shown on solaris

Dear all, I am a newbie in solaris and I need your advice. I have a Solaris version 5.9 installed on Sunfire V240. I am able to ssh the machine from putty remotely. My problem is that I cannot see the display from KVM switch I have connected to it. I need also to be able to see the GUI... (2 Replies)
Discussion started by: mbouster
2 Replies

5. Solaris

Zone failes to boot due to mount issue, dir exists in zone.

I have two physical servers, with zones that mount local storage. We were using "raw device" in the zonecfg to point to a metadevice on the global zone (it was not mounted in the global zone at any point). It failed to mount on every boot because the directory existed in the zone. I... (6 Replies)
Discussion started by: BG_JrAdmin
6 Replies

6. Solaris

Sun Blade 150 wont boot off cdrom

Hello, Ive just aquired a blade 150 off ebay.Im new to suns and are having a problem getting it to boot off the cdrom.Openboot continuously tries to do a network boot and I cant enter any commands.Im using an average pc keyboard and it definetly works.Thanks for any help.:wall: (3 Replies)
Discussion started by: chucky
3 Replies

7. UNIX for Advanced & Expert Users

Solaris 10: I forgot to detach a zone before zpool export. Uninstall zone?

Dear all, recently, I migrated a solaris zone from one host to another. The zone was inside of a zpool. The zpool cotains two volumes. I did the following: host1: $ zlogin zone1 shutdown -y -g0 -i0 #Zone status changes from running to installed $ zpool export zone1 host2: $ zpool... (2 Replies)
Discussion started by: custos
2 Replies

8. SCO

Sco UNIX wont boot - long beeps

HI All, I have an old SCO-UNIX machine which I support a long standing client / friend with. I don't use it very often, and is kept switched off. All was well 2 weeks ago, but when I tried to boot today all I get is a continuous set of long beeps but no booting. I have checked inside... (4 Replies)
Discussion started by: andy sleight
4 Replies

9. Solaris

Solaris 11 Global zone patching having Solaris 10 branded zone

I am planning to do solaris 11 global zone patching having solaris 10 branded zone. I have a doubts on step 8 specially Can someone clear my step 8 doubts or if anything wrong between step 1 to step 9 please correct that also as I have pretty good idea about Step 10 mean patching in solaris 10... (2 Replies)
Discussion started by: amity
2 Replies
rtc(1M) 						  System Administration Commands						   rtc(1M)

NAME
rtc - provide all real-time clock and GMT-lag management SYNOPSIS
/usr/sbin/rtc [-c] [-z zone-name] DESCRIPTION
On x86 systems, the rtc command reconciles the difference in the way that time is established between UNIX and MS-DOS systems. UNIX systems utilize Greenwich Mean Time (GMT), while MS-DOS systems utilize local time. Without arguments, rtc displays the currently configured time zone string. The currently configured time zone string is based on what was last recorded by rtc-z zone-name. The rtc command is not normally run from a shell prompt; it is generally invoked by the system. Commands such as date(1) and rdate(1M), which are used to set the time on a system, invoke /usr/sbin/rtc -c to ensure that daylight savings time (DST) is corrected for properly. OPTIONS
-c This option checks for DST and makes corrections if necessary. It is normally run once a day by a cron job. If there is no RTC time zone or /etc/rtc_config file, this option will do nothing. -z zone-name This option, which is normally run by the system at software installation time, is used to specify the time zone in which the RTC is to be maintained. It updates the configuration file /etc/rtc_config with the name of the specified zone and the current GMT lag for that zone. If there is an existing rtc_config file, this command will update it. If not, this command will create it. FILES
/etc/rtc_config The data file used to record the time zone and GMT lag. This file is completely managed by /usr/sbin/rtc, and it is read by the kernel. ATTRIBUTES
See attributes(5) for descriptions of the following attributes: +-----------------------------+-----------------------------+ | ATTRIBUTE TYPE | ATTRIBUTE VALUE | +-----------------------------+-----------------------------+ |Architecture |x86 | +-----------------------------+-----------------------------+ |Availability |SUNWcsu | +-----------------------------+-----------------------------+ SEE ALSO
date(1), rdate(1M), attributes(5) SunOS 5.10 3 Oct 2003 rtc(1M)
All times are GMT -4. The time now is 03:13 PM.
Unix & Linux Forums Content Copyright 1993-2022. All Rights Reserved.
Privacy Policy