hi all, i was wondering if i have some volume manager and i want to format all partitions/disks and re-create new slices can i use regular format command or what?
i think veritas volume manager is already installed. (2 Replies)
Have a compaq dl380 proliant installed with solaris..
It has a smart array 5i controller.. currently I have 2 18gb disks - mirrored as far as I can see...
I have just put in 2 36gb disks (just physically put in)
How do I get solaris to recognise them so I can use them?
format command - only... (2 Replies)
I need to insert a new hard disk into a Sun Fire v210 machine. The (only) internal disk which is already in the machine is part number XRA-SC1CB-73G10K (DISK DRIVE ASSY. 73GB, 10K RPM, with SPUD BRACKET).
I also have nearly endless access to IBM hard disks at extremely low prices and would there... (2 Replies)
Friends,
i have used the following code to get the number of disks in solaris
echo | pfexec format | egrep -v "Searching|AVAILABLE|Specify|^$|@" | wc -l
is there a better way to get the same result (5 Replies)
I've just installed Sol 10 Update 9 on a Sun 4140 server and have a RAID 1 configuration (2 136 Gb drives) for the OS and have created a RAID 5 array (6 136 GB) drives. When i log into the system I am unable to see the RAID 5 disks at all. I've tried using the devfsadm command but no luck and... (9 Replies)
Hi Guy's
can anyone advise me ..
I have mapped some of EMC devices from EMC Storage to Sun Solaris server and I want to list all the disk which are assigned from the storage
can anyone advise me with the command how to can I list all the disk in Solaris
Thanks .. (2 Replies)
I want to develop a script that I can run like follows:
./format_disks.sh <disk name 1>, <disk name 2>, etc...
Some background. I've create a VMware based virtual machine that has Solaris 5.11 installed on it. Initially, the only disk that is on this VM is the one that hosts the OS. ... (1 Reply)
Hi Guys,
obviously new to SOLARIS SUN SPARC 5.10
I would really appreciate if you help me see how to find free disks available in my system.
Like i am a linux admin. If i want to grow a file system in linux. I would first have a look at my volume groups to see if they have free PEs if not then... (2 Replies)
Hi
What I'm trying to do(manually) is logging into the server
and running the below mentioned commands
ls /sys/class/scsi_device/ | while read i; do echo "- - -" > /sys/class/scsi_device/$i/device/rescan;done
lsblk
echo -e "o\nn\np\n1\n\n\nw" | fdisk /dev/sdd
partx -a /dev/sdd1... (7 Replies)
Discussion started by: James0806
7 Replies
LEARN ABOUT LINUX
diskscan
diskscan(1M) System Administration Commands diskscan(1M)NAME
diskscan - perform surface analysis
SYNOPSIS
diskscan [-W] [-n] [-y] raw_device
DESCRIPTION
diskscan is used by the system administrator to perform surface analysis on a portion of a hard disk. The disk portion may be a raw parti-
tion or slice; it is identified using its raw device name. By default, the specified portion of the disk is read (non-destructive) and
errors reported on standard error. In addition, a progress report is printed on standard out. The list of bad blocks should be saved in a
file and later fed into addbadsec(1M), which will remap them.
OPTIONS
The following options are supported:
-n Causes diskscan to suppress linefeeds when printing progress information on standard out.
-W Causes diskscan to perform write and read surface analysis. This type of surface analysis is destructive and should be invoked
with caution.
-y Causes diskscan to suppress the warning regarding destruction of existing data that is issued when -W is used.
OPERANDS
The following operands are supported:
raw_device The address of the disk drive (see FILES).
FILES
The raw device should be /dev/rdsk/c?[t?]d?[ps]?. See disks(1M) for an explanation of SCSI and IDE device naming conventions.
ATTRIBUTES
See attributes(5) for descriptions of the following attributes:
+-----------------------------+-----------------------------+
| ATTRIBUTE TYPE | ATTRIBUTE VALUE |
+-----------------------------+-----------------------------+
|Architecture |x86 |
+-----------------------------+-----------------------------+
|Availability |SUNWcsu |
+-----------------------------+-----------------------------+
SEE ALSO addbadsec(1M), disks(1M), fdisk(1M), fmthard(1M), format(1M), attributes(5)NOTES
The format(1M) utility is available to format, label, analyze, and repair SCSI disks. This utility is included with the diskscan, addbad-
sec(1M), fdisk(1M), and fmthard(1M) commands available for x86. To format an IDE disk, use the DOS format utility; however, to label, ana-
lyze, or repair IDE disks on x86 systems, use the Solaris format(1M) utility.
SunOS 5.10 24 Feb 1998 diskscan(1M)
06-04-2012
