EJECT(1)							   User Commands							  EJECT(1)

NAME

       eject - eject removable media

SYNOPSIS

       eject [options] device|mountpoint

DESCRIPTION

       Eject  allows removable media (typically a CD-ROM, floppy disk, tape, JAZ, ZIP or USB disk) to be ejected under software control.  The com-
       mand can also control some multi-disc CD-ROM changers, the auto-eject feature supported by some devices, and close the disc  tray  of  some
       CD-ROM drives.

       The  device corresponding to device or mountpoint is ejected.  If no name is specified, the default name /dev/cdrom is used. The device may
       be addressed by device name (e.g. 'sda'), device path (e.g. '/dev/sda'), UUID=<uuid> or LABEL=<label> tags.

       There are four different methods of ejecting, depending on whether the device is a CD-ROM, SCSI device,	removable  floppy,  or	tape.	By
       default eject tries all four methods in order until it succeeds.

       If device partition is specified, the whole-disk device is used.  If the device or a device partition is currently mounted, it is unmounted
       before ejecting.

OPTIONS

       -a, --auto on|off
	      This option controls the auto-eject mode, supported by some devices.  When enabled, the drive automatically ejects when  the  device
	      is closed.

       -c, --changerslot slot
	      With  this  option a CD slot can be selected from an ATAPI/IDE CD-ROM changer.  Linux 2.0 or higher is required to use this feature.
	      The CD-ROM drive can not be in use (mounted data CD or playing a music CD) for a change request to work.	Please also note that  the
	      first slot of the changer is referred to as 0, not 1.

       -d, --default
	      List the default device name.

       -f, --floppy
	      This option specifies that the drive should be ejected using a removable floppy disk eject command.

       -F, --force
	      Force eject, don't check device type.

       -h, --help
	      Print a help text and exit.

       -i, --manualeject on|off
	      This  option controls locking of the hardware eject button.  When enabled, the drive will not be ejected when the button is pressed.
	      This is useful when you are carrying a laptop in a bag or case and don't want it to eject if the button is inadvertently pressed.

       -p, --proc
	      This option allow you to use /proc/mounts instead /etc/mtab. It also passes the -n option to umount(1).

       -q, --tape
	      This option specifies that the drive should be ejected using a tape drive offline command.

       -m, --no-unmount
	      The option tells eject to not try to unmount at all.

       -M, --no-partitions-unmount
	      The option tells eject to not try to unmount another partitions on partitioned devices. If another partition is mounted the  program
	      will not attempt to eject the media. It will attempt to unmount only mountpoint or mounted device given on eject command line.

       -n, --noop
	      With this option the selected device is displayed but no action is performed.

       -t, --trayclose
	      With this option the drive is given a CD-ROM tray close command.	Not all devices support this command.

       -T, --traytoggle
	      With this option the drive is given a CD-ROM tray close command if it's opened, and a CD-ROM tray eject command if it's closed.  Not
	      all devices support this command, because it uses the above CD-ROM tray close command.

       -r, --cdrom
	      This option specifies that the drive should be ejected using a CDROM eject command.

       -s, --scsi
	      This option specifies that the drive should be ejected using SCSI commands.

       -v, --verbose
	      Run in verbose mode; more information is displayed about what the command is doing.

       -V, --version
	      Display program version and exit.

       -x, --cdspeed <speed>
	      With this option the drive is given a CD-ROM select speed command.  The speed argument is a  number  indicating  the  desired  speed
	      (e.g.  8	for  8X speed), or 0 for maximum data rate.  Not all devices support this command and you can only specify speeds that the
	      drive is capable of.  Every time the media is changed this option is cleared.  This option can be used alone, or with the -t and	-c
	      options.

       -X, --listspeed
	      With  this  option the CD-ROM drive will be probed to detect the available speeds.  The output is a list of speeds which can be used
	      as an argument of the -x option.	This only works with Linux 2.6.13 or higher, on previous versions solely the maximum speed will be
	      reported.  Also note that some drive may not correctly report the speed and therefore this option does not work with them.

EXIT STATUS

       Returns 0 if operation was successful, 1 if operation failed or command syntax was not valid.

NOTES

       Eject  only  works with devices that support one or more of the four methods of ejecting.  This includes most CD-ROM drives (IDE, SCSI, and
       proprietary), some SCSI tape drives, JAZ drives, ZIP drives (parallel port, SCSI, and IDE versions), and LS120 removable  floppies.   Users
       have  also reported success with floppy drives on Sun SPARC and Apple Macintosh systems.  If eject does not work, it is most likely a limi-
       tation of the kernel driver for the device and not the eject program itself.

       The -r, -s, -f, and -q options allow controlling which methods are used to eject.  More than one method can be specified.  If none of these
       options are specified, it tries all four (this works fine in most cases).

       Eject  may not always be able to determine if the device is mounted (e.g. if it has several names).  If the device name is a symbolic link,
       eject will follow the link and use the device that it points to.

       If eject determines that the device can have multiple partitions, it will attempt to unmount all mounted partitions of  the  device  before
       ejecting (see --no-partitions-unmount). If an unmount fails, the program will not attempt to eject the media.

       You  can  eject	an audio CD.  Some CD-ROM drives will refuse to open the tray if the drive is empty.  Some devices do not support the tray
       close command.

       If the auto-eject feature is enabled, then the drive will always be ejected after running this command.	Not all Linux kernel CD-ROM  driv-
       ers support the auto-eject mode.  There is no way to find out the state of the auto-eject mode.

       You need appropriate privileges to access the device files.  Running as root is required to eject some devices (e.g. SCSI devices).

AUTHORS

       Jeff Tranter <tranter@pobox.com> - original author.
       Karel Zak <kzak@redhat.com> and Michal Luscon <mluscon@redhat.com> - util-linux version.

SEE ALSO

       lsblk(8), findmnt(8), mount(8), umount(8)

AVAILABILITY

       The  eject command is part of the util-linux package and is available from Linux Kernel Archive <ftp://ftp.kernel.org/pub/linux/utils/util-
       linux/>.

Linux								    April 2012								  EJECT(1)