Hi frnz,
Need an urgent help...
I have installed solaris 8 in a sunblade workstation with 136GB hdd.
While installation it has taken a default filesystem size as 1.37GB for root.
AFtr completing the installation i have extended the root partition to 130GB.
But still df output shows... (4 Replies)
Hi All,
I need to increase the filesystem of / and /var (two different slices)? Space will be coming from /home slice so I need to decrease it. Is that possible without reinstallation or in a single-user-mode?
Any idea or link please.
Thanks in advance. (5 Replies)
Hi..
I want to increase the file system size of any filesystem online, without using the Volume manager like LVMs, is it possible? & if yes then how? (3 Replies)
Hi
I am using oracle linux 6.4. My hard drive capacity is 500 GB. my filesystem size onbly 50GB. I would like to extend my filesystem size to around 100GB. I tried many codes but still I am not able.
this is the output of df -h :
Filesystem Size Used Avail Use% Mounted on... (6 Replies)
Dear all,
recently, I migrated a solaris zone from one host to another. The zone was inside of a zpool. The zpool cotains two volumes.
I did the following:
host1:
$ zlogin zone1 shutdown -y -g0 -i0 #Zone status changes from running to installed
$ zpool export zone1
host2:
$ zpool... (2 Replies)
I am planning to do solaris 11 global zone patching having solaris 10 branded zone. I have a doubts on step 8 specially
Can someone clear my step 8 doubts or if anything wrong between step 1 to step 9 please correct that also as I have pretty good idea about Step 10 mean patching in solaris 10... (2 Replies)
Hi
Please let me know how to increase the size of /tmp file system from 512m to 1024m dynamically without reboot in solaris zone
# df -h
Filesystem size used avail capacity Mounted on
zones/zone1 11G 1.0G 10.0G 10% /
/dev 11G 1.0G ... (6 Replies)
I need to increase the /var (UFS) filesystem and root disk under veritas control or root disk is encapsulated
# df -k /var
Filesystem kbytes used avail capacity Mounted on
/dev/vx/dsk/var 13241195 12475897 674524 96% /var
# fstyp /dev/vx/dsk/var
ufs
# pkginfo... (1 Reply)
Discussion started by: amity
1 Replies
LEARN ABOUT LINUX
prtvtoc
prtvtoc(1M) System Administration Commands prtvtoc(1M)NAME
prtvtoc - report information about a disk geometry and partitioning
SYNOPSIS
prtvtoc [-fhs] [-t vfstab] [-m mnttab] device
DESCRIPTION
The prtvtoc command allows the contents of the label to be viewed. The command can be used only by the super-user.
The device name can be the file name of a raw device in the form of /dev/rdsk/c?t?d?s2 or can be the file name of a block device in the
form of /dev/dsk/c?t?d?s2.
OPTIONS
The following options are supported:
-f Report on the disk free space, including the starting block address of the free space, number of blocks, and unused parti-
tions.
-h Omit the headers from the normal output.
-m mnttab Use mnttab as the list of mounted filesystems, in place of /etc/mnttab.
-s Omit all headers but the column header from the normal output.
-t vfstab Use vfstab as the list of filesystem defaults, in place of /etc/vfstab.
EXAMPLES
Example 1: Using the prtvtoc Command
The following example uses the prtvtoc command on a 424-megabyte hard disk:
example# prtvtoc /dev/rdsk/c0t3d0s2
* /dev/rdsk/c0t3d0s2 partition map
*
* Dimension:
* 512 bytes/sector
* 80 sectors/track
* 9 tracks/cylinder
* 720 sectors/cylinder
* 2500 cylinders
* 1151 accessible cylinders
*
* Flags:
* 1: unmountable
* 10: read-only
* * First Sector Last
* Partition Tag Flags Sector Count Sector Mount Directory
0 2 00 0 76320 76319 /
1 3 01 76320 132480 208799
2 5 00 0 828720 828719
5 6 00 208800 131760 340559 /opt
6 4 00 340560 447120 787679 /usr
7 8 00 787680 41040 828719 /export/home
example#
The data in the Tag column above indicates the type of partition, as follows:
Name Number
UNASSIGNED 0x00
BOOT 0x01
ROOT 0x02
SWAP 0x03
USR 0x04
BACKUP 0x05
STAND 0x06
VAR 0x07
HOME 0x08
ALTSCTR 0x09
CACHE 0x0a
RESERVED 0x0b
The data in the Flags column above indicates how the partition is to be mounted, as follows:
Name Number
MOUNTABLE, READ AND WRITE 0x00
NOT MOUNTABLE 0x01
MOUNTABLE, READ ONLY 0x10
Example 2: Using the prtvtoc Command with the -f Option
The following example uses the prtvtoc command with the -f option on a 424-megabyte hard disk:
example# prtvtoc -f /dev/rdsk/c0t3d0s2
FREE_START=0 FREE_SIZE=0 FREE_COUNT=0 FREE_PART=34
Example 3: Using the prtvtoc Command on a Disk Over One Terabyte
The following example uses uses the prtvtoc command on a disk over one terabyte:.
example# prtvtoc /dev/rdsk/c1t1d0s2
* /dev/rdsk/c1t1d0s2 partition map
*
* Dimensions:
* 512 bytes/sector
* 3187630080 sectors
* 3187630013 accessible sectors
*
* Flags:
* 1: unmountable
* 10: read-only
*
* First Sector Last
* Partition Tag Flags Sector Count Sector Mount Directory
0 2 00 34 262144 262177
1 3 01 262178 262144 524321
6 4 00 524322 3187089340 3187613661
8 11 00 3187613662 16384 318763004
ATTRIBUTES
See attributes(5) for descriptions of the following attributes:
+-----------------------------+-----------------------------+
| ATTRIBUTE TYPE | ATTRIBUTE VALUE |
+-----------------------------+-----------------------------+
|Availability |SUNWcsu |
+-----------------------------+-----------------------------+
SEE ALSO devinfo(1M), fmthard(1M), format(1M), mount(1M), attributes(5)WARNINGS
The mount command does not check the "not mountable" bit.
SunOS 5.10 25 Jul 2002 prtvtoc(1M)
05-25-2012
