Type
to see what disks are in vg00
then again
And look at the last stanza : You should see something like:
Hoping it will tell you what disk is failing... or already dead e.g:
Also, look what you have in your /var/adm/syslog/syslog.log ! You may fins EM- critical messages...
I dont even know what raid level this is, but its raid 5 mirrored from the looks of it.
I have a failed disk (t12) within this mirror. What is the best way to replace this disk? 2 things concern me, isn't there a command to prepare the disk for a hot swap? and what should i do with the... (3 Replies)
Hi Experts,
I have configured A D40 Array. There is an faulty disk which is not part of an raid volume but shows fault in the diagnostics.
pdisk15 U0.1-P1-I1/Q1-W40AA83CC2400D
SSA160 Physical Disk Drive ( MB)
Is there a way to stop this... (2 Replies)
Hi,
Recently i came across a disk that seems to be faulty and need help. I have gathered some information by running below commands and any help on how to solve this will be great.
# uname –a
SunOS XYZ 5.7 Generic_106541-16 sun4u sparc SUNW,Ultra-4
#df -k
Filesystem kbytes used... (3 Replies)
Requirement to remove a faulty mirrored disk from hp-ux LVM
<root@pdwp1s>/etc # vgdisplay -v /dev/vg00
vgdisplay: Warning: couldn't query physical volume "/dev/dsk/c2t0d0":
The specified path does not correspond to physical volume attached to
this volume group
vgdisplay: Warning: couldn't... (9 Replies)
Hi,
Have mirrored the primary disk to 3 .
Server and OS:
# uname -a
HP-UX pdwp1s B.11.11 U 9000/800 118434630 unlimited-user license
# model
9000/800/L3000-7x
# strings /etc/lvmtab
/dev/vg00
+F@<
/dev/dsk/c1t2d0
/dev/dsk/c2t2d0
/dev/dsk/c2t0d0
But now I have only 1 disk... (5 Replies)
Hi Guys,
One of two disks in my solaris machine has failed, the name is disk0, this is SUN physical sparc machine
But I work remotely, so people working near that physical server are not that technical, so from OS command prompt can run some command to bink faulty disk at front panel of Server.... (9 Replies)
Hi,
One of my disk is in 'disk missing state'. It is a sharedVG and cluster nodes.
The errpt keeps reporting stale partition error.
lvs are in open/stale state.
In this sceanario is replacing the disk the best practice?
When i do a lsdev the disk is labelled as below.
hdisk3 Available ... (2 Replies)
Hello,
On 4/20/2018, we performed a disk replacement on our IBM 8202 P7 server. After the disk was rebuilt, the SAS Disk Array sissas0 showed a status of degraded. However, the pdisks in the array all show a status of active.
We did see a message in errpt. DISK ARRAY PROTECTION SUSPENDED.
... (1 Reply)
Hello,
On 4/20/2018, we performed a disk replacement on our IBM 8202 P7 server. After the disk was rebuilt, the SAS Disk Array sissas0 showed a status of degraded. However, the pdisks in the array all show a status of active.
We did see a message in errpt. DISK ARRAY PROTECTION SUSPENDED.
... (3 Replies)
I plugged both power cables in both power supply. When I unplugged each power cable one by one, the SPARC T4-1 machine keep running. However, show faulty command shows below message. (I have also attached the picture of both power supply)
-> show faulty
Target ... (1 Reply)
Discussion started by: z_haseeb
1 Replies
LEARN ABOUT SUNOS
i2o_bs
i2o_bs(7D) Devices i2o_bs(7D)NAME
i2o_bs - Block Storage OSM for I2O
SYNOPSIS
disk@local target id#:a through u
disk@local target id#:a through u raw
DESCRIPTION
The I2O Block Storage OSM abstraction (BSA, which also is referred to as block storage class) layer is the primary interface that Solaris
operating environments use to access block storage devices. A block storage device provides random access to a permanent storage medium.
The i2o_bs device driver uses I2O Block Storage class messages to control the block device; and provides the same functionality (ioctls,
for example) that is present in the Solaris device driver like 'cmdk, dadk' on x86 for disk. The maximum size disk supported by i2o_bs is
the same as what is available on x86.
The i2o_bs is currently implemented version 1.5 of Intelligent IO specification.
The block files access the disk using the system's normal buffering mechanism and are read and written without regard to physical disk
records. There is also a "raw" interface that provides for direct transmission between the disk and the user's read or write buffer. A
single read or write call usually results in one I/O operation; raw I/O is therefore considerably more efficient when many bytes are
transmitted. The names of the block files are found in /dev/dsk; the names of the raw files are found in /dev/rdsk.
I2O associates each block storage device with a unique ID called a local target id that is assigned by I2O hardware. This information can
be acquired by the block storage OSM through I2O Block Storage class messages. For Block Storage OSM, nodes are created in
/devices/pci#/pci# which include the local target ID as one component of device name that the node refers to. However the /dev names and
the names in /dev/dsk and /dev/rdsk do not encode the local target id in any part of the name.
For example, you might have the following:
/devices/ /dev/dsk name
---------------------------------------------------------------
/devices/pci@0,0/pci101e,0@10,1/disk@10:a /dev/dsk/c1d0s0
I/O requests to the disk must have an offset and transfer length that is a multiple of 512 bytes or the driver returns an EINVAL error.
Slice 0 is normally used for the root file system on a disk, slice 1 is used as a paging area (for example, swap), and slice 2 for backing
up the entire fdisk partition for Solaris software. Other slices may be used for usr file systems or system reserved area.
Fdisk partition 0 is to access the entire disk and is generally used by the fdisk(1M) program.
FILES
/dev/dsk/cndn[s|p]n block device
/dev/rdsk/cndn[s|p]n raw device
where:
cn controller n
dn instance number
sn UNIX system slice n (0-15)
pn fdisk partition(0)
/kernel/drv/i2o_bs i2o_bs driver
/kernel/drv/i2o_bs.conf Configuration file
ATTRIBUTES
See attributes(5)
for descriptions of the following attributes:
+-----------------------------+-----------------------------+
|ATTRIBUTE TYPE |ATTRIBUTE VALUE
+-----------------------------+-----------------------------+
|Architecture |x86 |
+-----------------------------+-----------------------------+
SEE ALSO fdisk(1M), format(1M)mount(1M),lseek(2), read(2), write(2), readdir(3C), vfstab(4), acct.h(3HEAD), attributes(5), dkio(7I)SunOS 5.10 21 Jul 1998 i2o_bs(7D)