05-21-2012
Thank you for your help VBE and you are not blind but I don't know the OS version. As i have very limited access to the costumer site only tonight i will be able to find out the OS version and more about the disk. What i have confirmed is that it is a boot disk. With what i know from costumer the system is connected to msl6030 tape library and they do backups of configuration every day. Unfortunately I'm not familiar with diagnose tool but I'll try my best to get as much info as possible and post.
Thank you very very much
10 More Discussions You Might Find Interesting
1. Solaris
I dont even know what raid level this is, but its raid 5 mirrored from the looks of it.
I have a failed disk (t12) within this mirror. What is the best way to replace this disk? 2 things concern me, isn't there a command to prepare the disk for a hot swap? and what should i do with the... (3 Replies)
Discussion started by: BG_JrAdmin
3 Replies
2. AIX
Hi Experts,
I have configured A D40 Array. There is an faulty disk which is not part of an raid volume but shows fault in the diagnostics.
pdisk15 U0.1-P1-I1/Q1-W40AA83CC2400D
SSA160 Physical Disk Drive ( MB)
Is there a way to stop this... (2 Replies)
Discussion started by: vuppala360
2 Replies
3. Solaris
Hi,
Recently i came across a disk that seems to be faulty and need help. I have gathered some information by running below commands and any help on how to solve this will be great.
# uname –a
SunOS XYZ 5.7 Generic_106541-16 sun4u sparc SUNW,Ultra-4
#df -k
Filesystem kbytes used... (3 Replies)
Discussion started by: phanidhar6039
3 Replies
4. HP-UX
Requirement to remove a faulty mirrored disk from hp-ux LVM
<root@pdwp1s>/etc # vgdisplay -v /dev/vg00
vgdisplay: Warning: couldn't query physical volume "/dev/dsk/c2t0d0":
The specified path does not correspond to physical volume attached to
this volume group
vgdisplay: Warning: couldn't... (9 Replies)
Discussion started by: Shirishlnx
9 Replies
5. HP-UX
Hi,
Have mirrored the primary disk to 3 .
Server and OS:
# uname -a
HP-UX pdwp1s B.11.11 U 9000/800 118434630 unlimited-user license
# model
9000/800/L3000-7x
# strings /etc/lvmtab
/dev/vg00
+F@<
/dev/dsk/c1t2d0
/dev/dsk/c2t2d0
/dev/dsk/c2t0d0
But now I have only 1 disk... (5 Replies)
Discussion started by: Shirishlnx
5 Replies
6. Solaris
Hi Guys,
One of two disks in my solaris machine has failed, the name is disk0, this is SUN physical sparc machine
But I work remotely, so people working near that physical server are not that technical, so from OS command prompt can run some command to bink faulty disk at front panel of Server.... (9 Replies)
Discussion started by: manalisharmabe
9 Replies
7. AIX
Hi,
One of my disk is in 'disk missing state'. It is a sharedVG and cluster nodes.
The errpt keeps reporting stale partition error.
lvs are in open/stale state.
In this sceanario is replacing the disk the best practice?
When i do a lsdev the disk is labelled as below.
hdisk3 Available ... (2 Replies)
Discussion started by: ElizabethPJ
2 Replies
8. Filesystems, Disks and Memory
Hello,
On 4/20/2018, we performed a disk replacement on our IBM 8202 P7 server. After the disk was rebuilt, the SAS Disk Array sissas0 showed a status of degraded. However, the pdisks in the array all show a status of active.
We did see a message in errpt. DISK ARRAY PROTECTION SUSPENDED.
... (1 Reply)
Discussion started by: terrya
1 Replies
9. AIX
Hello,
On 4/20/2018, we performed a disk replacement on our IBM 8202 P7 server. After the disk was rebuilt, the SAS Disk Array sissas0 showed a status of degraded. However, the pdisks in the array all show a status of active.
We did see a message in errpt. DISK ARRAY PROTECTION SUSPENDED.
... (3 Replies)
Discussion started by: terrya
3 Replies
10. UNIX for Beginners Questions & Answers
I plugged both power cables in both power supply. When I unplugged each power cable one by one, the SPARC T4-1 machine keep running. However, show faulty command shows below message. (I have also attached the picture of both power supply)
-> show faulty
Target ... (1 Reply)
Discussion started by: z_haseeb
1 Replies
LEARN ABOUT HPUX
vxsplitlines
vxsplitlines(1M) vxsplitlines(1M)
NAME
vxsplitlines - show disks with conflicting configuration copies in a cluster
SYNOPSIS
vxsplitlines [-g diskgroup] [-c daname]
DESCRIPTION
If you import portions of a disk group on different systems, this can lead to conflicting configuration copies on the disks of the disk
group.
If the configuration information in a disk group is ambiguous, it may not be possible for Veritas Volume Manager to determine which config-
uration copy is most up-to-date. (This is usually termed a serial split brain (SSB) condition when it occurs in a cluster.) You cannot
import a disk group in this state unless you specify which disk's configuration copy to use.
You can use the vxsplitlines command to see which disks in a disk group have conflicting configuration copies, and use this information
together with your knowledge of the history of the disk groups' usage to determine which configuration copy is most valid.
The output from vxsplitlines displays the vxdg commands that you can run to import the disk group using the available configuration copies.
The -o selectcp option of the vxdg import command is used to select the configuration copy to use for the import.
OPTIONS
-c daname Display the SSB IDs for each disk that are stored in the configuration copy on the disk specified by its disk access name.
Note: Although the SSB IDs for some disks may match, this does not necessarily mean that those disks' configuration copies have
recorded all the configuration changes. When viewed from some other configuration copies, the SSB IDs of the same disks may not
match.
-g diskgroup
Specifies the disk group. If a disk group is not specified, the default disk group is used as determined from the rules on the
vxdg(1M) manual page.
EXAMPLES
Display the disks on each side of the split in the disk group newdg:
vxsplitlines -g newdg
Display the SSB IDs stored in the configuration copy on disk c2t4d0:
vxsplitlines -g newdg -c c2t4d0
NOTES
The vxsplitlines is primarily intended to be used with private disk groups, but it also works with shared disk groups.
The version number of the disk group must be 110 or greater.
SEE ALSO
vxdg(1M)
Veritas Volume Manager Administrator's Guide
VxVM 5.0.31.1 24 Mar 2008 vxsplitlines(1M)