Sponsored Content
Operating Systems Solaris Connect from Dell Laptop to SunBlade 100 Post 302641139 by methyl on Tuesday 15th of May 2012 05:11:33 PM
Old 05-15-2012
Quote:
The question I have is, do I need a router or is a RJ45 [network cable] cable connection between laptop and the SunBlade be enough for a telnet connection ?
You don't want or need a router, but you do need an Ethernet Hub or an Ethernet Switch which can handle the normal speed of the fastest interface. The cabling then would be two normal pin-to-pin RJ45 cables.

No reason to change the port for telnet - it only makes thing complicated.

From Windows 7, just try the supplied command-line telnet first before introducing 3rd-party software.

As Corona688 hinted, make sure that the IP addresses chosen are on the same IP network.
Code:
e.g. For a Class C private network.
192.168.10.4 with netmask 255.255.255.0
192.168.10.5 with netmask 255.255.255.0

No need for a router if they are on the same IP network.

Further to Corona688, the port definitions in /etc/services are purely documentary.

Last edited by methyl; 05-15-2012 at 06:39 PM..
 

10 More Discussions You Might Find Interesting

1. Solaris

NIC cards for sunblade 100

I need to add a PCI NIC to a sunblade 100 running solaris 8. Im new to this and was hoping someone could give me some card names and models which will work for this system and has a driver for this sparc system. thanks (3 Replies)
Discussion started by: meyersp
3 Replies

2. Solaris

regd.sunblade 100

hii alll i have a problem with my sunblade100. when i switch on, no display comes but if i ping from a remote machine its pinging,but iam not able to telent to that sun server,what can be the problem,how can i sort ot this issue 2 thing in usb iam not able to use STOP N (to clear the... (3 Replies)
Discussion started by: solaris8in
3 Replies

3. Debian

How to install Debian on a SUNBLADE 100?

I have tried to install the Debian distribution for SPARC processor, but is a pian in the neck trying to boot from cdrom or floppy. Please can somebody to help me to know the easiest way to boot and install Debian on a SUNBLADE 100 system? or wich is the best way to installed on this system, I... (2 Replies)
Discussion started by: GEIER
2 Replies

4. UNIX for Dummies Questions & Answers

How to connect laptop to Unix system via Parallel port

Hi, I have been using a computer to keep track of inventory for my business. I am pretty sure it runs on Unix. In the back of the computer there is some sort of PCI card that has about 8 RJ-11 ports on it. I use that card to connect the Unix system to my 3 VT-220 terminals. I use a simple 6... (1 Reply)
Discussion started by: john202
1 Replies

5. Solaris

Adding memory to a SunBlade 100

Question, when adding memory to a SunBlade 100, are you required to add it in matched pairs? My current box has 2 x 256mb sticks of PC-133 ram. I tried adding 1 512mb sticks and the system failed to come up. I saw at Sunsolve that you can mix and match different sized memory. (5 Replies)
Discussion started by: stocksj
5 Replies

6. Solaris

Help! Trying to install Solaris 10 on a Sunblade 100

I recently bought a sunblade 100 for $150 from a guy that posted it on craigslist. I'm trying to learn Solaris 10. Prior to giving me the system he had Ubuntu installed. He removed it for before giving it to me. I basically have a hard disk that has nothing installed in it. I tried installing... (6 Replies)
Discussion started by: haloy
6 Replies

7. Solaris

PC133 for sunblade 100

Greetings, I was in the mood of upgrading my sunblade100 in my bedroom, since I recuperated some RAM from intel servers, and found myself with what seems to not work (I was hoping to pass from 256Mb to 2GB... and then upgrading to solaris 10...) after this failure I tried with just one 512 MB,... (2 Replies)
Discussion started by: vbe
2 Replies

8. Ubuntu

Connect 2 laptops with RJ45 cable (Ubuntu 10.10 laptop with Windows 7 laptop)

Hi to all, I have the problem that a laptops with windows XP cannot startup even in safe mode nor using last good known configuration. I have a Ubuntu 10.10 Live CD and booting from it I can read the Hard Drive. I need to do a backup the Hard Drive from XP laptop and I want to connect this... (5 Replies)
Discussion started by: cgkmal
5 Replies

9. Hardware

How to connect a 4TB G-Raid hard drive to a laptop?

I am having trouble connecting my 4TB G-Raid Hard drive to my Compaq Hp laptop can anyone tell me how or what I need in order to connect the 4T and getting it working. (10 Replies)
Discussion started by: Jake Wolf
10 Replies

10. Hardware

Connect SATA Laptop HardDrive to Desktop SATA Slots

Hello everybody, I need to connect a laptop 2.5 SATA hard drive to a Desktop board (which uses 3.5' SATA hard drives). I've tried the connectors and they fit excellent in the 2.5 SATA connectors. The problem is that the laptop hard drive uses 5v and the PC's power source sends 12v. So, my... (4 Replies)
Discussion started by: Zykl0n-B
4 Replies
netmasks(4)                                                        File Formats                                                        netmasks(4)

NAME
netmasks - network mask database SYNOPSIS
/etc/inet/netmasks /etc/netmasks DESCRIPTION
The netmasks file contains network masks used to implement IP subnetting. It supports both standard subnetting as specified in RFC-950 and variable length subnetting as specified in RFC-1519. When using standard subnetting there should be a single line for each network that is subnetted in this file with the network number, any number of SPACE or TAB characters, and the network mask to use on that network. Network numbers and masks may be specified in the conventional IP `.' (dot) notation (like IP host addresses, but with zeroes for the host part). For example, 128.32.0.0 255.255.255.0 can be used to specify that the Class B network 128.32.0.0 should have eight bits of subnet field and eight bits of host field, in addition to the standard sixteen bits in the network field. When using variable length subnetting, the format is identical. However, there should be a line for each subnet with the first field being the subnet and the second field being the netmask that applies to that subnet. The users of the database, such as ifconfig(1M), perform a lookup to find the longest possible matching mask. It is possible to combine the RFC-950 and RFC-1519 form of subnet masks in the net- masks file. For example, 128.32.0.0 255.255.255.0 128.32.27.0 255.255.255.240 128.32.27.16 255.255.255.240 128.32.27.32 255.255.255.240 128.32.27.48 255.255.255.240 128.32.27.64 255.255.255.240 128.32.27.80 255.255.255.240 128.32.27.96 255.255.255.240 128.32.27.112 255.255.255.240 128.32.27.128 255.255.255.240 128.32.27.144 255.255.255.240 128.32.27.160 255.255.255.240 128.32.27.176 255.255.255.240 128.32.27.192 255.255.255.240 128.32.27.208 255.255.255.240 128.32.27.224 255.255.255.240 128.32.27.240 255.255.255.240 128.32.64.0 255.255.255.192 can be used to specify different netmasks in different parts of the 128.32.0.0 Class B network number. Addresses 128.32.27.0 through 128.32.27.255 have a subnet mask with 28 bits in the combined network and subnet fields (often referred to as the subnet field) and 4 bits in the host field. Furthermore, addresses 128.32.64.0 through 128.32.64.63 have a 26 bits in the subnet field. Finally, all other addresses in the range 128.32.0.0 through 128.32.255.255 have a 24 bit subnet field. Invalid entries are ignored. SEE ALSO
ifconfig(1M), inet(7P) Postel, Jon, and Mogul, Jeff, Internet Standard Subnetting Procedure, RFC 950, Network Information Center, SRI International, Menlo Park, Calif., August 1985. V. Fuller, T. Li, J. Yu, K. Varadhan, Classless Inter-Domain Routing (CIDR): an Address Assignment and Aggregation Strategy, RFC 1519, Network Information Center, SRI International, Menlo Park, Calif., September 1993. T. Pummill, B. Manning, Variable Length Subnet Table For IPv4, RFC 1878, Network Information Center, SRI International, Menlo Park, Calif., December 1995. NOTES
/etc/inet/netmasks is the official SVr4 name of the netmasks file. The symbolic link /etc/netmasks exists for BSD compatibility. SunOS 5.10 7 Jan 1997 netmasks(4)
All times are GMT -4. The time now is 07:30 PM.
Unix & Linux Forums Content Copyright 1993-2022. All Rights Reserved.
Privacy Policy