How to resolve duplicated MAC address on Solaris server?
Hi folks,
I found out the following:
The duplicated mac address was found on ce5.
Can you advise me how to remove ce5 from that mac address without causing any service impacts?
I wanted to remove the duplicated mac address and keep one for ce4.
Thanks in advance
Last edited by DukeNuke2; 05-07-2012 at 03:36 AM..
Hi sir,
i want to make such programe which takes MAC(Ethernet) address of any host & give me its IP address.......
but i'm nt getting that how i can pass the MAC address to Frame........
Please give me an idea for making such program...
Thanks & regards
Krishna (3 Replies)
Hi!
I have a dns server (bind) with 2 zones forward and reverse and i need to resolve one ip completely different. I have add to /etc/hosts and i can ping but i can't do nslookup. I've tried to add the dns server responsible to resolve that ip on /etc/resolv.conf without success. So how can i... (2 Replies)
I m having interface ce0 ce1 and its sub interfaces for that.
I want to give MAC addresses for the same.
How will I assign it.
Please give solution for the same (4 Replies)
hi,
how to assign static ip address to the server having solaris 10. assign static ip to nge0 which will sustain across reboots which will include all settings including gateway setting etc.. (2 Replies)
Hi there
I lost connectivity to one of our remote systems and when I checked the messages log I found the following:
Aug 10 23:42:34 host xntpd: time reset (step) 1.681729 s
Aug 16 13:20:51 host ip: WARNING: node "mac address" is using our IP address x.x.x.x on aggr1
Aug 16 13:20:51 host... (9 Replies)
Hi,
I just got a little task trying to seemingly find a needle in a haystack.
I have a server (FreeBSD) where several NFS mounts are established from a host somewhere on the local LAN with the 192.168.x.x prefix.
Needless to say, the guy who set this up wasn't too fond of documenting... (2 Replies)
I am on a VPS that is pretty much unmanaged so it means im on my own. I did my best to configure it so i can host my own site for other people to see it online but seems like i have network problems because in the last days many of my users report they cant enter my site from my domain and... (7 Replies)
four interfaces with ifconfig
all interfaces have the same mac. If is not set for unique.
but it still works.
what difference does it make to have all macs the same or different? (4 Replies)
Discussion started by: rrodgers
4 Replies
LEARN ABOUT V7
netmasks
netmasks(4) File Formats netmasks(4)NAME
netmasks - network mask database
SYNOPSIS
/etc/inet/netmasks
/etc/netmasks
DESCRIPTION
The netmasks file contains network masks used to implement IP subnetting. It supports both standard subnetting as specified in RFC-950 and
variable length subnetting as specified in RFC-1519. When using standard subnetting there should be a single line for each network that is
subnetted in this file with the network number, any number of SPACE or TAB characters, and the network mask to use on that network. Network
numbers and masks may be specified in the conventional IP `.' (dot) notation (like IP host addresses, but with zeroes for the host part).
For example,
128.32.0.0 255.255.255.0
can be used to specify that the Class B network 128.32.0.0 should have eight bits of subnet field and eight bits of host field, in addition
to the standard sixteen bits in the network field.
When using variable length subnetting, the format is identical. However, there should be a line for each subnet with the first field being
the subnet and the second field being the netmask that applies to that subnet. The users of the database, such as ifconfig(1M), perform a
lookup to find the longest possible matching mask. It is possible to combine the RFC-950 and RFC-1519 form of subnet masks in the net-
masks file. For example,
128.32.0.0 255.255.255.0
128.32.27.0 255.255.255.240
128.32.27.16 255.255.255.240
128.32.27.32 255.255.255.240
128.32.27.48 255.255.255.240
128.32.27.64 255.255.255.240
128.32.27.80 255.255.255.240
128.32.27.96 255.255.255.240
128.32.27.112 255.255.255.240
128.32.27.128 255.255.255.240
128.32.27.144 255.255.255.240
128.32.27.160 255.255.255.240
128.32.27.176 255.255.255.240
128.32.27.192 255.255.255.240
128.32.27.208 255.255.255.240
128.32.27.224 255.255.255.240
128.32.27.240 255.255.255.240
128.32.64.0 255.255.255.192
can be used to specify different netmasks in different parts of the 128.32.0.0 Class B network number. Addresses 128.32.27.0 through
128.32.27.255 have a subnet mask with 28 bits in the combined network and subnet fields (often referred to as the subnet field) and 4 bits
in the host field. Furthermore, addresses 128.32.64.0 through 128.32.64.63 have a 26 bits in the subnet field. Finally, all other
addresses in the range 128.32.0.0 through 128.32.255.255 have a 24 bit subnet field.
Invalid entries are ignored.
SEE ALSO ifconfig(1M), inet(7P)
Postel, Jon, and Mogul, Jeff, Internet Standard Subnetting Procedure, RFC 950, Network Information Center, SRI International, Menlo Park,
Calif., August 1985.
V. Fuller, T. Li, J. Yu, K. Varadhan, Classless Inter-Domain Routing (CIDR): an Address Assignment and Aggregation Strategy, RFC 1519,
Network Information Center, SRI International, Menlo Park, Calif., September 1993.
T. Pummill, B. Manning, Variable Length Subnet Table For IPv4, RFC 1878, Network Information Center, SRI International, Menlo Park, Calif.,
December 1995.
NOTES
/etc/inet/netmasks is the official SVr4 name of the netmasks file. The symbolic link /etc/netmasks exists for BSD compatibility.
SunOS 5.10 7 Jan 1997 netmasks(4)